MUR620CT Preferred Device SWITCHMODEt Power Rectifier These state−of−the−art SWITCHMODE power rectifiers are designed for use in switching power supplies, inverters and as free wheeling diodes. http://onsemi.com Features • • • • ULTRAFAST RECTIFIER 6.0 AMPERES, 200 VOLTS Ultrafast 35 Nanosecond Recovery Time 175°C Operating Junction Temperature Popular TO−220 Package Pb−Free Package is Available* 1 2, 4 Mechanical Characteristics: 3 • Case: Epoxy, Molded • Weight: 1.9 Grams (Approximately) • Finish: All External Surfaces Corrosion Resistant and Terminal 4 Leads are Readily Solderable • Lead Temperature for Soldering Purposes: 260°C Max. for 10 Seconds TO−220AB CASE 221A PLASTIC MAXIMUM RATINGS Rating Symbol Value Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 200 V Average Rectified Forward Voltage (Rated VR, TC = 130°C) Per Diode Total Device IF(AV) Peak Repetitive Forward Current per Diode Leg (Rated VR, Square Wave, 20 kHz, TC = 130°C) IFRM Non−Repetitive Peak Surge Current (Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz) IFSM 75 A TJ, Tstg −65 to +175 °C Operating Junction and Storage Temperature Range 1 2 3 MARKING DIAGRAM A 3.0 6.0 6.0 A Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. AY WW U620G AKA A Y WW U620 G AKA = Assembly Location = Year = Work Week = Device Code = Pb−Free Package = Diode Polarity ORDERING INFORMATION Device MUR620CT MUR620CTG *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. © Semiconductor Components Industries, LLC, 2006 February, 2006 − Rev. 3 1 Package Shipping TO−220 50 Units/Rail TO−220 (Pb−Free) 50 Units/Rail Preferred devices are recommended choices for future use and best overall value. Publication Order Number: MUR620CT/D MUR620CT THERMAL CHARACTERISTICS (Per Diode Leg) Rating Symbol Typical Maximum Unit RqJC 5.0−6.0 7.0 °C/W Symbol Typical Maximum Unit 0.80 0.94 0.895 0.975 2.0−10 0.01−3.0 250 5.0 20−30 35 Thermal Resistance, Junction−to−Case ELECTRICAL CHARACTERISTICS (Per Diode Leg) Rating Instantaneous Forward Voltage (Note 1) (iF = 3.0 A, TC = 150°C) (iF = 3.0 A, TC = 25°C) vF Instantaneous Reverse Current (Note 1) (Rated DC Voltage, TC = 150°C) (Rated DC Voltage, TC = 25°C) iR Reverse Recovery Time (IF = 1.0 A, di/dt = 50 A/ms) trr V mA i F , INSTANTANEOUS FORWARD CURRENT (AMPS) 1. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%. 10 7.0 5.0 3.0 2.0 1.0 0.7 0.5 TJ = 175°C 0.3 0.2 0.1 0.2 25°C 150°C 100°C 0.4 0.6 0.8 1.0 vF, INSTANTANEOUS FORWARD VOLTAGE (VOLTS) 1.2 Figure 1. Typical Forward Voltage I R, REVERSE CURRENT (A) μ 100 40 20 10 TJ = 175°C 4.0 2.0 1.0 150°C 0.4 0.2 0.1 100°C 0.04 0.02 0.01 0.004 0.002 0.001 25°C 0 20 40 60 80 100 120 140 160 VR, REVERSE VOLTAGE (VOLTS) Figure 2. Typical Reverse Current http://onsemi.com 2 180 200 ns I F(AV), AVERAGE FORWARD CURRENT (AMPS) MUR620CT 8.0 Rated VR Applied 7.0 6.0 DC 5.0 4.0 SQUARE WAVE 3.0 2.0 1.0 0 100 120 180 140 160 TC, CASE TEMPERATURE (°C) IF(AV) , AVERAGE FORWARD CURRENT (AMPS) Figure 3. Total Device Current Derating, Case 7.0 RqJA = 16°C/W with a typical TO−220 heat sink 6.0 dc 5.0 SQUARE WAVE 4.0 dc 3.0 2.0 SQUARE WAVE RqJA = 60°C/W (free air, no heat sink) 1.0 0 0 40 20 60 80 100 120 140 160 180 200 TA, AMBIENT TEMPERATURE (°C) PF(AV), AVERAGE POWER DISSIPATION (WATTS) Figure 4. Total Device Current Derating, Ambient 8.0 7.0 SQUARE WAVE DC 6.0 5.0 4.0 3.0 2.0 1.0 0 0 1 2 3 4 5 6 IF(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 5. Power Dissipation http://onsemi.com 3 7 8 MUR620CT PACKAGE DIMENSIONS TO−220 THREE−LEAD TO−220AB CASE 221A−09 ISSUE AA −T− B SEATING PLANE C F T S 4 DIM A B C D F G H J K L N Q R S T U V Z A Q 1 2 3 U H K Z L R V NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. J G D N INCHES MIN MAX 0.570 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.147 0.095 0.105 0.110 0.155 0.018 0.025 0.500 0.562 0.045 0.060 0.190 0.210 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 0.045 −−− −−− 0.080 MILLIMETERS MIN MAX 14.48 15.75 9.66 10.28 4.07 4.82 0.64 0.88 3.61 3.73 2.42 2.66 2.80 3.93 0.46 0.64 12.70 14.27 1.15 1.52 4.83 5.33 2.54 3.04 2.04 2.79 1.15 1.39 5.97 6.47 0.00 1.27 1.15 −−− −−− 2.04 SWITCHMODE is a trademark of Semiconductor Components Industries, LLC. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 61312, Phoenix, Arizona 85082−1312 USA Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder Japan: ON Semiconductor, Japan Customer Focus Center 2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051 Phone: 81−3−5773−3850 http://onsemi.com 4 For additional information, please contact your local Sales Representative. MUR620CT/D