BYW80−200 SWITCHMODEt Power Rectifiers This state−of−the−art device is designed for use in switching power supplies, inverters and as free wheeling diodes. Features • • • • • • • • http://onsemi.com Ultrafast 35 Nanosecond Recovery Time 175°C Operating Junction Temperature Popular TO−220 Package Epoxy Meets UL 94 V−0 @ 0.125 in Low Forward Voltage Low Leakage Current High Temperature Glass Passivated Junction Pb−Free Package is Available* ULTRAFAST RECTIFIERS 8.0 AMPERES, 200 VOLTS 1 4 3 Mechanical Characteristics • Case: Epoxy, Molded • Weight: 1.9 Grams (Approximately) • Finish: All External Surfaces Corrosion Resistant and Terminal MARKING DIAGRAM 4 Leads are Readily Solderable • Lead Temperature for Soldering Purposes: 260°C Max. for 10 Seconds MAXIMUM RATINGS Rating 1 Symbol Values Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 200 V Average Rectified Forward Current Total Device, (Rated VR), TC = 150°C IF(AV) 8.0 A Peak Repetitive Forward Current (Rated VR, Square Wave, 20 kHz), TC = 150°C IFM 16 A Nonrepetitive Peak Surge Current (Surge applied at rated load conditions halfwave, single phase, 60 Hz) IFSM 100 A TJ, Tstg −65 to +175 °C Operating Junction Temperature and Storage Temperature Range CASE 221B TO−220B PLASTIC 3 A Y WW BYW80−200 G KA = Assembly Location = Year = Work Week = Device Code = Pb−Free Package = Diode Polarity ORDERING INFORMATION Device Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. AY WWG BYW80−200 KA BYW80−200 BYW80−200G Package Shipping TO−220 50 Units/Rail TO−220 (Pb−Free) 50 Units/Rail *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. © Semiconductor Components Industries, LLC, 2005 August, 2005 − Rev. 2 1 Publication Order Number: BYW80/D BYW80−200 THERMAL CHARACTERISTICS Rating Symbol Values Unit RqJC 3.0 °C/W Maximum Thermal Resistance, Junction−to−Case ELECTRICAL CHARACTERISTICS Maximum Instantaneous Forward Voltage (Note 1) (iF = 7.0 Amps, TC = 100°C) (iF = 22 Amps, TC = 25°C) vF Maximum Instantaneous Reverse Current (Note 1) (Rated dc Voltage, TJ = 100°C) (Rated dc Voltage, TJ = 25°C) iR Maximum Reverse Recovery Time (IF = 1.0 Amp, di/dt = 50 Amps/ms) (IF = 0.5 Amp, iR = 1.0 Amp, IREC = 0.25 Amp) trr V 0.85 1.25 mA 1 0.01 ns 35 25 1. Pulse Test: Pulse Width ≤ 300 ms, Duty Cycle ≤ 2.0%. 1000 100 IR, REVERSE CURRENT (m A) 70 50 20 10 100°C 1.0 25°C 0.1 10 0.01 7.0 0 5.0 20 40 60 80 100 120 140 160 VR, REVERSE VOLTAGE (VOLTS) 180 200 Figure 2. Typical Reverse Current* * The curves shown are typical for the highest voltage device in the grouping. Typical reverse current for lower voltage selections can be estimated from these same curves if VR is sufficiently below rated VR. 3.0 2.0 TJ = 175°C 100°C IF(AV) , AVERAGE FORWARD CURRENT (AMPS) i F , INSTANTANEOUS FORWARD CURRENT (AMPS) 30 TJ = 175°C 100 25°C 1.0 0.7 0.5 0.3 0.2 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 10 9.0 RATED VR APPLIED 8.0 dc 7.0 6.0 SQUARE WAVE 5.0 4.0 3.0 2.0 1.0 0 140 vF, INSTANTANEOUS VOLTAGE (VOLTS) 150 160 170 TC, CASE TEMPERATURE (°C) Figure 1. Typical Forward Voltage Figure 3. Current Derating, Case http://onsemi.com 2 180 RqJA = 16°C/W RqJA = 60°C/W (NO HEAT SINK) 12 dc 10 SQUARE WAVE 8.0 6.0 4.0 dc 2.0 SQUARE WAVE 0 0 r(t), TRANSIENT THERMAL RESISTANCE (NORMALIZED) PF(AV) , AVERAGE POWER DISSIPATION (WATTS) 14 20 40 60 80 100 120 140 160 180 200 10 9.0 TJ = 175°C 8.0 7.0 SQUARE WAVE 6.0 dc 5.0 4.0 3.0 2.0 1.0 0 0 1.0 3.0 2.0 4.0 5.0 6.0 7.0 8.0 TA, AMBIENT TEMPERATURE (°C) IF(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 4. Current Derating, Ambient Figure 5. Power Dissipation 9.0 1.0 D = 0.5 0.5 0.2 0.1 0.1 0.05 0.01 0.05 t1 t2 SINGLE PULSE 0.02 0.01 0.01 ZqJC(t) = r(t) RqJC RqJC = 1.5 °C/W MAX D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT T1 P(pk) DUTY CYCLE, D = t1/t2 0.02 0.05 0.1 0.2 0.5 1.0 2.0 5.0 10 20 TJ(pk) − TC = P(pk) ZqJC(t) 50 t, TIME (ms) Figure 6. Thermal Response 1000 C, CAPACITANCE (pF) IF(AV) , AVERAGE FORWARD CURRENT (AMPS) BYW80−200 300 TJ = 25°C 100 30 10 1.0 10 VR, REVERSE VOLTAGE (VOLTS) Figure 7. Typical Capacitance http://onsemi.com 3 100 100 200 500 1000 10 BYW80−200 PACKAGE DIMENSIONS TO−220 TWO−LEAD CASE 221B−04 ISSUE D NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. C B Q F S T DIM A B C D F G H J K L Q R S T U 4 A 1 U 3 H K L R D G J INCHES MIN MAX 0.595 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.147 0.190 0.210 0.110 0.130 0.018 0.025 0.500 0.562 0.045 0.060 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 MILLIMETERS MIN MAX 15.11 15.75 9.65 10.29 4.06 4.82 0.64 0.89 3.61 3.73 4.83 5.33 2.79 3.30 0.46 0.64 12.70 14.27 1.14 1.52 2.54 3.04 2.04 2.79 1.14 1.39 5.97 6.48 0.000 1.27 ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 61312, Phoenix, Arizona 85082−1312 USA Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder Japan: ON Semiconductor, Japan Customer Focus Center 2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051 Phone: 81−3−5773−3850 http://onsemi.com 4 For additional information, please contact your local Sales Representative. BYW80−200/D