ONSEMI NCS2550SNT1G

NCS2550
750 MHz Voltage Feedback
Op Amp
NCS2550 is a 750 MHz voltage feedback monolithic operational
amplifier featuring high slew rate and low differential gain and phase
error. The voltage feedback architecture allows for a superior
bandwidth and low power consumption.
http://onsemi.com
Features
−3.0 dB Small Signal BW (AV = +2.0, VO = 0.5 Vp−p) 750 MHz Typ
Slew Rate 1700 V/ms
Supply Current 13 mA
Input Referred Voltage Noise 5.0 nV/ ǸHz
THD −64 dBc (f = 5.0 MHz, VO = 2.0 Vp−p)
Output Current 100 mA
Pin Compatible with EL5157, AD8057
This is a Pb−Free Device
MARKING
DIAGRAM
5
1
YF0, N2550
A
Y
W
G
Applications
• Line Drivers
• Radar/Communication Receivers
NORMALIZED GAIN (dB)
0
VOUT = 2.0 VPP
−3
VOUT = 1.0 VPP
−6
OUT
1
VEE
2
+IN
3
−15
1k
1
= NCS2550
= Assembly Location
= Year
= Work Week
= Pb−Free Package
Gain = +2
VS = ±5V
RF = 150W
RL = 150W
10k
100k
VCC
4
−IN
−
ORDERING INFORMATION
10M 100M
1M
FREQUENCY (Hz)
1G
10G
Figure 1. Frequency Response:
Gain (dB) vs. Frequency Av = +2.0
© Semiconductor Components Industries, LLC, 2006
May, 2006 − Rev. 2
5
(Top View)
VOUT = 0.5 VPP
−12
YF0AYW
G
SOT23−5 (TSOP−5) PINOUT
3
−9
5
SOT23−5
(TSOP−5)
SN SUFFIX
CASE 483
+
•
•
•
•
•
•
•
•
Device
Package
Shipping†
NCS2550SNT1G
SOT23−5
(TSOP−5)
(Pb−Free)
3000/Tape & Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
1
Publication Order Number:
NCS2550/D
NCS2550
PIN FUNCTION DESCRIPTION
Pin
(SOT23/SC70)
Symbol
Function
1
OUT
Output
Equivalent Circuit
VCC
ESD
OUT
VEE
2
VEE
Negative Power Supply
3
+IN
Non−inverted Input
VCC
ESD
ESD
−IN
+IN
VEE
4
−IN
Inverted Input
5
VCC
Positive Power Supply
See Above
VCC
−IN
+IN
OUT
CC
VEE
Figure 2. Simplified Device Schematic
http://onsemi.com
2
NCS2550
ATTRIBUTES
Characteristics
Value
ESD
Human Body Model
Machine Model
Charged Device Model
2.0 kV
200 V
1.0 kV
Moisture Sensitivity (Note 1)
Flammability Rating
Level 1
Oxygen Index: 28 to 34
UL 94 V−0 @ 0.125 in
1. For additional information, see Application Note AND8003/D.
MAXIMUM RATINGS
Parameter
Symbol
Rating
Unit
Power Supply Voltage
VS
11
Vdc
Input Voltage Range
VI
vVS
Vdc
Input Differential Voltage Range
VID
vVS
Vdc
Output Current
IO
100
mA
Maximum Junction Temperature (Note 2)
TJ
150
°C
Operating Ambient Temperature
TA
−40 to +85
°C
Storage Temperature Range
Tstg
−60 to +150
°C
Power Dissipation
PD
(See Graph)
mW
RqJA
158
°C/W
Thermal Resistance, Junction−to−Air
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
2. Power dissipation must be considered to ensure maximum junction temperature (TJ) is not exceeded.
MAXIMUM POWER DISSIPATION (mW)
MAXIMUM POWER DISSIPATION
The maximum power that can be safely dissipated is
limited by the associated rise in junction temperature. For
the plastic packages, the maximum safe junction
temperature is 150°C. If the maximum is exceeded
momentarily, proper circuit operation will be restored as
soon as the die temperature is reduced. Leaving the device
in the “overheated’’ condition for an extended period can
result in device damage.
1400
1200
1000
800
600
400
200
0
−50
−25
25
50
0
75 100
AMBIENT TEMPERATURE (C)
125 150
Figure 3. Power Dissipation vs. Temperature
http://onsemi.com
3
NCS2550
AC ELECTRICAL CHARACTERISTICS (VCC = +5.0 V, VEE = −5.0 V, TA = −40°C to +85°C, RL = 150 W to GND, RF = 150 W,
AV = +2.0, Enable is left open, unless otherwise specified).
Symbol
Characteristic
Conditions
Min
Typ
Max
Unit
FREQUENCY DOMAIN PERFORMANCE
BW
GF0.1dB
Bandwidth
3.0 dB Small Signal
3.0 dB Large Signal
0.1 dB Gain Flatness
Bandwidth
MHz
AV = +2.0, VO = 0.5 Vp−p
AV = +2.0, VO = 2.0 Vp−p
750
350
AV = +2.0
40
MHz
dG
Differential Gain
AV = +2.0, RL = 150 W, f = 3.58 MHz
0.07
%
dP
Differential Phase
AV = +2.0, RL = 150 W, f = 3.58 MHz
0.01
°
Slew Rate
AV = +2.0, Vstep = 2.0 V
1700
V/ms
Settling Time
0.1%
AV = +2.0, Vstep = 2.0 V
10
(10%−90%) AV = +2.0, Vstep = 2.0 V
2.0
ns
TIME DOMAIN RESPONSE
SR
ts
tr tf
Rise and Fall Time
ns
HARMONIC/NOISE PERFORMANCE
THD
Total Harmonic Distortion
f = 5.0 MHz, VO = 2.0 Vp−p
−64
dB
HD2
2nd Harmonic Distortion
f = 5.0 MHz, VO = 2.0 Vp−p
−65
dBc
HD3
3rd Harmonic Distortion
f = 5.0 MHz, VO = 2.0 Vp−p
−75
dBc
IP3
Third−Order Intercept
f = 10 MHz, VO = 1.0 Vp−p
40
dBm
Spurious−Free Dynamic
Range
f = 5.0 MHz, VO = 2.0 Vp−p
65
dBc
SFDR
eN
Input Referred Voltage Noise
f = 1.0 MHz
5.0
nVń ǸHz
iN
Input Referred Current Noise
f = 1.0 MHz
4.0
pAń ǸHz
http://onsemi.com
4
NCS2550
DC ELECTRICAL CHARACTERISTICS (VCC = +5.0 V, VEE = −5.0 V, TA = −40°C to +85°C, RL = 150 W to GND, RF = 150 W,
AV = +2.0, Enable is left open, unless otherwise specified).
Symbol
Characteristic
Conditions
Min
Typ
Max
Unit
−10
0
+10
mV
DC PERFORMANCE
VIO
DVIO/DT
IIB
DIIB/DT
Input Offset Voltage
Input Offset Voltage
Temperature Coefficient
6.0
mV/°C
Input Bias Current
VO = 0 V
"3.2
Input Bias Current
Temperature Coefficient
VO = 0 V
"40
nA/°C
"3.0
"3.2
V
40
50
dB
"20
mA
INPUT CHARACTERISTICS
VCM
CMRR
Input Common Mode Voltage
Range (Note 3)
Common Mode Rejection
Ratio
(See Graph)
RIN
Input Resistance
4.5
MW
CIN
Differential Input
Capacitance
1.0
pF
0.1
11
W
OUTPUT CHARACTERISTICS
ROUT
Output Resistance
Closed Loop
Open Loop
VO
Output Voltage Range
"3.0
"4.0
V
IO
Output Current
"50
"100
mA
10
V
POWER SUPPLY
VS
Operating Voltage Supply
IS
Power Supply Current
PSRR
Power Supply Rejection
Ratio
(See Graph)
3. Guaranteed by design and/or characterization.
http://onsemi.com
5
5.0
13
40
56
17
mA
dB
NCS2550
AC ELECTRICAL CHARACTERISTICS (VCC = +2.5 V, VEE = −2.5 V, TA = −40°C to +85°C, RL = 150 W to GND, RF = 150 W,
AV = +2.0, Enable is left open, unless otherwise specified).
Symbol
Characteristic
Conditions
Min
Typ
Max
Unit
FREQUENCY DOMAIN PERFORMANCE
BW
GF0.1dB
Bandwidth
3.0 dB Small Signal
3.0 dB Large Signal
0.1 dB Gain Flatness
Bandwidth
MHz
AV = +2.0, VO = 0.5 Vp−p
AV = +2.0, VO = 1.0 Vp−p
550
200
AV = +2.0
35
MHz
dG
Differential Gain
AV = +2.0, RL = 150 W, f = 3.58 MHz
0.07
%
dP
Differential Phase
AV = +2.0, RL = 150 W, f = 3.58 MHz
0.02
°
Slew Rate
AV = +2.0, Vstep = 1.0 V
900
V/ms
Settling Time
0.1%
AV = +2.0, Vstep = 1.0 V
10
(10%−90%) AV = +2.0, Vstep = 1.0 V
1.7
ns
TIME DOMAIN RESPONSE
SR
ts
tr tf
Rise and Fall Time
ns
HARMONIC/NOISE PERFORMANCE
THD
Total Harmonic Distortion
f = 5.0 MHz, VO = 1.0 Vp−p
−60
dB
HD2
2nd Harmonic Distortion
f = 5.0 MHz, VO = 1.0 Vp−p
−65
dBc
HD3
3rd Harmonic Distortion
f = 5.0 MHz, VO = 1.0 Vp−p
−63
dBc
IP3
Third−Order Intercept
f = 10 MHz, VO = 0.5 Vp−p
35
dBm
Spurious−Free Dynamic
Range
f = 5.0 MHz, VO = 1.0 Vp−p
63
dBc
SFDR
eN
Input Referred Voltage Noise
f = 1.0 MHz
5.0
nVń ǸHz
iN
Input Referred Current Noise
f = 1.0 MHz
4.0
pAń ǸHz
http://onsemi.com
6
NCS2550
DC ELECTRICAL CHARACTERISTICS (VCC = +2.5 V, VEE = −2.5 V, TA = −40°C to +85°C, RL = 150 W to GND, RF = 150 W,
AV = +2.0, Enable is left open, unless otherwise specified).
Symbol
Characteristic
Conditions
Min
Typ
Max
Unit
−10
0
+10
mV
DC PERFORMANCE
VIO
DVIO/DT
IIB
DIIB/DT
Input Offset Voltage
Input Offset Voltage
Temperature Coefficient
6.0
mV/°C
Input Bias Current
VO = 0 V
"3.2
Input Bias Current
Temperature Coefficient
VO = 0 V
"40
nA/°C
"1.1
"1.5
V
40
50
dB
"20
mA
INPUT CHARACTERISTICS
VCM
CMRR
Input Common Mode Voltage
Range (Note 3)
Common Mode Rejection
Ratio
(See Graph)
RIN
Input Resistance
4.5
MW
CIN
Differential Input
Capacitance
1.0
pF
0.1
11
W
OUTPUT CHARACTERISTICS
ROUT
Output Resistance
Closed Loop
Open Loop
VO
Output Voltage Range
"1.1
"1.5
V
IO
Output Current
"50
"100
mA
5.0
V
POWER SUPPLY
VS
Operating Voltage Supply
IS
Power Supply Current
PSRR
Power Supply Rejection
Ratio
(See Graph)
4. Guaranteed by design and/or characterization.
VIN
+
−
VOUT
RL
RF
RF
Figure 4. Typical Test Setup
(AV = +2.0, RF = 150 W, RL = 150 W)
http://onsemi.com
7
5.0
11
40
56
17
mA
dB
NCS2550
3
12
VOUT = 0.5 VPP
9
NORMALIZED GAIN (dB)
NORMALIZED GAIN (dB)
0
VOUT = 2.0 VPP
−3
VOUT = 1.0 VPP
−6
VOUT = 0.5 VPP
−9
Gain = +2
VS = ±5V
RF = 150W
RL = 150W
−12
−15
1k
10k
100k
6
3
0
−3
−6
VOUT = 1.0 VPP
−9
−12
−15
1G
10M 100M
1M
FREQUENCY (Hz)
−18
10k
10G
Figure 5. Frequency Response:
Gain (dB) vs. Frequency
Av = +2.0
Gain = +2
VOUT = 1.0 VPP
−6
Gain = +2
VOUT = 2.0 VPP
−9
−12
VS = ±5V
RF = 150W
RL = 150W
−15
100k
6
10G
1G
10G
Gain = +1
3
0
−3
−6
−9
−12
−15
1M
1G
9
0
−3
10M
100M
1M
FREQUENCY (Hz)
12
Gain = +1
VOUT = 1.0 VPP
3
100k
VOUT = 0.7 VPP
Figure 6. Frequency Response:
Gain (dB) vs. Frequency
Av = +1.0
NORMALIZED GAIN (dB)
NORMALIZED GAIN (dB)
6
Gain = +1
VS = ±5V
RF = 150W
RL = 150W
10M
100M
FREQUENCY (Hz)
−18
10k
1G
Figure 7. Large Signal Frequency Response
Gain (dB) vs. Frequency
VOUT = 0.5 VPP
VS = ±5V
RF = 150W
RL = 150W
100k
Gain = +2
1M
10M
100M
FREQUENCY (Hz)
Figure 8. Small Signal Frequency Response
Gain (dB) vs. Frequency
VS = ±5V
VS = ±5V
Figure 10. Large Signal Step Response
Vertical: 1 V/div
Horizontal: 3 ns/div
Figure 9. Small Signal Step Response
Vertical: 20 mV/div
Horizontal: 3 ns/div
http://onsemi.com
8
NCS2550
−40
−50
−55
THD
−60
HD2
−65
HD3
−70
−50
−55
−60
HD2
−65
HD3
−75
1
10
FREQUENCY (MHz)
−80
100
0
0.5
1
50
2
2.5
VOUT (VPP)
4
3.5
3
4.5
−20
VS = ±5V
−25
40
VS = ±5V
CMRR (dB)
−30
30
20
−35
−40
−45
10
0
−50
10
100
1k
10k
−55
10k
1M
100k
FREQUENCY (Hz)
0.08
DIFFERENTIAL GAIN (%)
VS = ±5V
−20
−30
−40
−50
−60
−70
10k
10M
100M
Figure 14. CMRR vs. Frequency
0
−10
1M
FREQUENCY (Hz)
Figure 13. Input Referred Voltage Noise vs.
Frequency
PSRR (dB)
1.5
Figure 12. THD, HD2, HD3 vs. Output Voltage
Figure 11. THD, HD2, HD3 vs. Frequency
VOLTAGE NOISE (nV/√Hz)
THD
−70
−75
−80
Gain = +2
Freq = 5 MHz
VS = ±5V
RF = 150W
RL = 150W
−45
DISTORTION (dB)
−45
DISTORTION (dB)
−40
Gain = +2
VOUT = 2 VPP
VS = ±5V
RF = 150W
RL = 150W
20MHz
Gain = +2
0.06 V = ±5V
S
RF = 150W
0.04
RL = 150W
10MHz
0.02
3.58MHz
0
−0.02
4.43MHz
−0.04
−0.06
100k
1M
10M
−0.08
−0.8
100M
FREQUENCY (Hz)
Figure 15. PSRR vs. Frequency
−0.6
−0.4
0.2
0.4
−0.2
0
OFFSET VOLTAGE (V)
Figure 16. Differential Gain
http://onsemi.com
9
0.6
0.8
NCS2550
14
20MHz
0.01
12
10MHz
0
85°C
25°C
13
0.02
CURRENT (mA)
DIFFERENTIAL PHASE (°)
0.03
3.58MHz
4.43MHz
−0.01
Gain = +2
VS = ±5V
−0.02 RF = 150W
RL = 150W
−0.03
−0.8 −0.6 −0.4
−40°C
11
10
9
8
7
−0.2
0
0.4
0.2
OFFSET VOLTAGE (V)
0.6
6
0.8
100
OUTPUT RESISTANCE (W)
OUTPUT VOLTAGE (VPP)
25°C
85°C
6
5
−40°C
4
3
4
5
9
6
7
8
POWER SUPPLY VOLTAGE (V)
10
1
0.1
100k
1M
10M
100M
1G
10G
70
VS = ±5V
RL = 150W
60
50
GAIN (dB)
NORMALIZED GAIN (dB)
11
Figure 20. Closed Loop Output Resistance vs.
Frequency
6
3
0
−12
10k
10
FREQUENCY (Hz)
10pF
9
−9
9
VS = ±5V
0.01
10k
11
12
−6
8
10
Figure 19. Output Voltage Swing vs. Supply
Voltage
−3
7
Figure 18. Supply Current vs. Power Supply
8
7
6
POWER SUPPLY VOLTAGE (V)
Figure 17. Differential Phase
2
5
4
100pF
Gain = +2
VOUT = 0.5 VPP
VS = ±5V
RF = 150W
RL = 150W
100k
40
30
20
10
47pF
0
1M
10M
100M
1G
−10
10k
10G
FREQUENCY (Hz)
100k
1M
10M
100M
1G
FREQUENCY (Hz)
Figure 21. Frequency Response vs. Capacitive Load
http://onsemi.com
10
Figure 22. Voltage Gain vs. Frequency
10G
NCS2550
Printed Circuit Board Layout Techniques
(see Figure 23). These diodes provide moderate protection
to input overdrive voltages above the supplies. The ESD
diodes can support high input currents with current limiting
series resistors. Keep these resistor values as low as possible
since high values degrade both noise performance and
frequency response. Under closed−loop operation, the ESD
diodes have no effect on circuit performance. However,
under certain conditions the ESD diodes will be evident. If
the device is driven into a slewing condition, the ESD diodes
will clamp large differential voltages until the feedback loop
restores closed−loop operation. Also, if the device is
powered down and a large input signal is applied, the ESD
diodes will conduct.
Proper high speed PCB design rules should be used for all
wideband amplifiers as the PCB parasitics can affect the
overall performance. Most important are stray capacitances
at the output and inverting input nodes as it can effect
peaking and bandwidth. A space (3/16″ is plenty) should be
left around the signal lines to minimize coupling. Also,
signal lines connecting the feedback and gain resistors
should be short enough so that their associated inductance
does not cause high frequency gain errors. Line lengths less
than 1/4″ are recommended.
Video Performance
This device designed to provide good performance with
NTSC, PAL, and HDTV video signals. Best performance is
obtained with back terminated loads as performance is
degraded as the load is increased. The back termination
reduces reflections from the transmission line and
effectively masks transmission line and other parasitic
capacitances from the amplifier output stage.
VCC
Internal
Circuitry
External
Pin
VEE
ESD Protection
Figure 23. Internal ESD Protection
All device pins have limited ESD protection using internal
diodes to power supplies as specified in the attributes table
http://onsemi.com
11
NCS2550
PACKAGE DIMENSIONS
TSOP−5
SN SUFFIX
CASE 483−02
ISSUE E
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
3. MAXIMUM LEAD THICKNESS INCLUDES
LEAD FINISH THICKNESS. MINIMUM LEAD
THICKNESS IS THE MINIMUM THICKNESS
OF BASE MATERIAL.
4. A AND B DIMENSIONS DO NOT INCLUDE
MOLD FLASH, PROTRUSIONS, OR GATE
BURRS.
D
S
5
4
1
2
L
A
3
B
G
J
C
0.05 (0.002)
DIM
A
B
C
D
G
H
J
K
L
M
S
H
M
K
MILLIMETERS
MIN
MAX
2.90
3.10
1.30
1.70
0.90
1.10
0.25
0.50
0.85
1.05
0.013
0.100
0.10
0.26
0.20
0.60
1.25
1.55
0_
10 _
2.50
3.00
INCHES
MIN
MAX
0.1142 0.1220
0.0512 0.0669
0.0354 0.0433
0.0098 0.0197
0.0335 0.0413
0.0005 0.0040
0.0040 0.0102
0.0079 0.0236
0.0493 0.0610
0_
10 _
0.0985 0.1181
SOLDERING FOOTPRINT*
0.95
0.037
1.9
0.074
2.4
0.094
1.0
0.039
0.7
0.028
SCALE 10:1
mm Ǔ
ǒinches
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer
purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5773−3850
http://onsemi.com
12
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
NCS2550/D