Secondary Lens with Holder OVLENSxx4 • • • • Custom designed for Optek OVSxxxCR4 LED Series Efficient light extraction and high flux output Narrow viewing angles Precision molded with optical grade plastic These water-clear polycarbonate lenses with black holders are specifically designed to mate with Optek’s 6x6mm power surface mount LEDs (OVSxxxCR4 Series) to provide a more narrow beam angle. Lenses are available in both 15° and 23° viewing angles. The lenses and holders sit firmly over the LED component and is easily attached to the PCB/MCPCB with adhesive. Part Number Viewing Angle Material Lens Color Lens Holder OVLENS154 15° 23° Polycarbonate Water Clear Black OVLENS234 Lens Dimensions 10.8 Ø20.00 Ø6.5 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A 1/07 Page 1 of 3 Secondary Lens with Holder For OVSxxxCR4 LED Series Lens Holder Dimensions OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A 1/07 Page 2 of 3 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Secondary Lens with Holder For OVSxxxCR4 LED Series Radiation Pattern for OVLENS154 Radiation Pattern for OVLENS234 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A 1/07 Page 3 of 3