PULSEJACK TM 1x1 Tab-DOWN RJ45 www.pulseeng.com Description: 10/100 Base-TX RJ45 1x1 Tab-DOWN with LEDs 8-pin (J0 series) integrated magnetics connector (ICM), designed to support applications, such as SOHO (ADSL modems), LAN-on-Motherboard (LOM), Hub and Switches. Features and Benefits: RoHS-5 peak wave solder temperature rating 235°C RoHS-6 peak wave solder temperature rating 260°C Suitable for CAT 5 & 6 Fast Ethernet Cable or better UTP Electrical Performance Summary: Meets or exceeds IEEE 802.3 standard for 100Base-T 350µH minimum OCL with 8mA bias current Minimum 1500Vrms isolation per IEEE 802.3 requirement Electrical Specifications @ 25°C — Operating Temperature 0°C to +70°C RoHS-5 Part No. Turns Ratios RoHS-6 Part No. TX Mech. Drawing EMI Fingers RX LEDs1 (L/R) Insertion Loss (dB TYP) 1-65 MHz 1-10 MHz Return Loss (dB TYP) 100W ±15W 10-30 30-60 MHz MHz Crosstalk (dB TYP) 60-80 MHz 1-30 MHz 30-60 MHz 60-100 MHz Common Mode Rejection (dB TYP) 1-50 50-150 MHz MHz Hipot (Vrms) @60Hz 1 MIN J0006D01B J0006D01BNL 1CT:1 1CT:1 A No G/Y -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500 J0006D21 J0006D21NL 1CT:1 1CT:1 E YES N/A -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500 J0006D21B J0006D21BNL 1CT:1 1CT:1 B YES G/Y -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500 J0011D01 J0011D01NL 1CT:1 1CT:1 C No N/A -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500 J0011D01B J0011D01BNL 1CT:1 1CT:1 A No G/Y -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500 J0011D21 J0011D21NL 1CT:1 1CT:1 E YES N/A -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500 J0011D21B J0011D21BNL 1CT:1 1CT:1 B YES G/Y -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500 J0011D21E J0011D21ENL 1CT:1 1CT:1 B YES G/G -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500 J0012D21 J0012D21NL 1CT:1 1CT:1 E YES N/A -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500 J0018D21 J0018D21NL 1CT:1.414 1CT:1 E YES N/A -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500 J0018D21E J0018D21ENL 1CT:1.414 1CT:1 B YES G/G -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500 J0024D21 J0024D21NL 1CT:2 1CT:1 E YES N/A -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500 J0024D21B J0024D21BNL 1CT:2 1CT:1 B YES G/Y -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500 J0026D01 J0026D01NL 1CT:1 1CT:1 D No N/A -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500 J0026D01B J0026D01BNL 1CT:1 1CT:1 A No G/Y -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500 J0026D01E J0026D01ENL 1CT:1 1CT:1 A No G/G -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500 J0026D01F 2 J0026D01FNL 2 1CT:1 1CT:1 A No G/Y -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500 J0026D21 J0026D21NL 1CT:1 1CT:1 E YES N/A -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500 J0026D21B J0026D21BNL 1CT:1 1CT:1 B YES G/Y -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500 J0026D21E J0026D21ENL 1CT:1 1CT:1 B YES G/G -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500 J0026D21F 2 J0026D21FNL2 1CT:1 1CT:1 B YES G/Y -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500 J0026D21G 3 J0026D21GNL3 1CT:1 1CT:1 B YES YG/G -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500 J0033D21 J0033D21NL 1.25CT:1 1CT:1 E YES N/A -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500 J0035D21B J0035D21BNL 1CT:1 1CT:1 F YES G/Y -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500 J0073D01B J0073D01BNL 1CT:2.5 1CT:1 A No G/Y -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500 Notes: 1. LEDs Left/Right: G=green, Y=yellow, N/A=none, YG=Bi-color LED Yellow Green. 2. LEDs with internal resistor. 3. Bi- color Left LED. 4. RoHS-5 - Product does not contain 5 out of the 6 banned substances specified in the RoHS directive. Product contains lead in applications considered as solders. 5. RoHS-6 - Product does not contain 5 out of the 6 banned substances specified in the RoHS directive. Some internal connections may contain lead in high temperature solder (solder alloys containing more than 85% lead). RJ45 Durability Testing Rating Part Number Mating Force (MAX) Unmating Force (MAX) Durability Plug to Jack Retention (MIN) J0 Series 5 lbs./2.268 kgs. 5 lbs./2.268 kgs. 750 Insertions 20 lbs./9.072 kgs. RJ45 Material Specification Part Number Material Shield Finish J0 Series Brass 10-20m inches Nickel over 10-20m inches Brass Material Contact Plating Area Solder Area 2 Phosphor Bronze Nickel underplating and selective gold plating 15µ inches 120µ inches Sn90/Pb10 over 50µ inches nickel Housing Material Specification Thermoplastic UL 94 V-0 MSL 3 Rating 1 Notes: 1. Connector dimensions comply with FCC dimension requirements. 2. RoHS-6 parts are tin matte finish over nickel. 3. MSL = Moisture Sensitivity Level rating from 1 to 5 (highest rating = 1, lowest rating = 5) USA 858 674 8100 • UK 44 1483 401 700 • France 33 3 84 35 04 04 • Singapore 65 6287 8998 • Shanghai 86 21 54643211 / 2 • China 86 769 85538070 • Taiwan 886 3 4641811 www.pulseeng.com 1 J403.D (5/06) PULSEJACK TM 1x1 Tab-DOWN RJ45 www.pulseeng.com J0 Series Mechanicals A B Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 USA 858 674 8100 • UK 44 1483 401 700 • France 33 3 84 35 04 04 • Singapore 65 6287 8998 • Shanghai 86 21 54643211 / 2 • China 86 769 85538070 • Taiwan 886 3 4641811 www.pulseeng.com 2 J403.D (5/06) PULSEJACK TM 1x1 Tab-DOWN RJ45 www.pulseeng.com J0 Series Mechanicals C D Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 USA 858 674 8100 • UK 44 1483 401 700 • France 33 3 84 35 04 04 • Singapore 65 6287 8998 • Shanghai 86 21 54643211 / 2 • China 86 769 85538070 • Taiwan 886 3 4641811 www.pulseeng.com 3 J403.D (5/06) PULSEJACK TM 1x1 Tab-DOWN RJ45 www.pulseeng.com J0 Series Mechanicals E F Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 USA 858 674 8100 • UK 44 1483 401 700 • France 33 3 84 35 04 04 • Singapore 65 6287 8998 • Shanghai 86 21 54643211 / 2 • China 86 769 85538070 • Taiwan 886 3 4641811 www.pulseeng.com 4 J403.D (5/06) PULSEJACK TM 1x1 Tab-DOWN RJ45 www.pulseeng.com J0 Series Electrical Schematics TD+ 1 75 75 CT 5 6 RX- 1CT : 1 RECEIVE 1CT : 1 TRANSMIT RD+ 3 3 RX+ CT 5 75 RD- 6 1CT : 1 RECEIVE 4 5 7 6 RX- 75 0.001mF CHS GROUND 8 NOTE: Connect CHS GND to PCB ground. J0018 75 3 RX+ CT 5 75 RD- 6 5 6 RX- 1CT : 1 RECEIVE NC 7 4 5 75 7 7 8 2 TX- 1CT : 1 TRANSMIT RD+ 4 4 NC 7 7 8 PCB SIDE TO PHY 3 RX+ PCB SIDE TO PHY 2 TX- 1CT : 1 TRANSMIT TD- 3 2 TX- CABLE SIDE TD- 2 CABLE SIDE PCB SIDE TO PHY 1 TX+ CT 2 CT 4 RD+ 3 RD- 6 TD+ 1 1 TX+ 1 TX+ CT 4 TD- 2 J0012 TD+ 1 CABLE SIDE J0011 J0006 CHS GRND 8 8 0.001mF NOTE: Connect CHS GND to PCB ground. 8 75 J0024 TD+ 1 1 TX+ TD+ 1 CT 4 1 TX+ CT 4 75 3 RX+ CT 5 75 6 RX- 1CT : 1 RECEIVE 5 75 3 RX+ RD+ 3 CT 5 RD- 6 4 NC 7 2 TX- 1CT : 2 TRANSMIT 6 RX- 1CT : 1 RECEIVE 4 5 7 7 CHS GROUND 8 0.001mF NOTE: Connect CHS GND to PCB ground. J0026 7 8 75 TD+ 1 8 J0033 1 TX+ 2 TX3 RX+ CT 6 RD- 8 1CT : 1 RECEIVE 4 75 2 TX- 1.25CT : 1 TRANSMIT RD+ 7 3 RX+ CT 6 RD- 8 1CT : 1 RECEIVE 4 75 75 75 6 RX4 5 75 4 7 0.001mF C1 6 RX- TD- 2 PCB SIDE TO PHY 1CT : 1 TRANSMIT CABLE SIDE PCB SIDE TO PHY CT 3 RD+ 7 CHS GROUND 5 1 TX+ TD+ 1 CT 3 TD- 2 8 CABLE SIDE RD- 6 PCB SIDE TO PHY RD+ 3 TD- 2 CABLE SIDE 2 TX- 1CT : Ö2 TRANSMIT CABLE SIDE PCB SIDE TO PHY TD- 2 75 75 7 0.001mF 8 CHS GROUND 5 NOTE: Connect CHS GND to PCB ground. 5 75 8 NOTE: Connect CHS GND to PCB ground. USA 858 674 8100 • UK 44 1483 401 700 • France 33 3 84 35 04 04 • Singapore 65 6287 8998 • Shanghai 86 21 54643211 / 2 • China 86 769 85538070 • Taiwan 886 3 4641811 www.pulseeng.com 5 J403.D (5/06) PULSEJACK TM 1x1 Tab-DOWN RJ45 www.pulseeng.com J0 Series Electrical Schematics (continued) J0035 J0073 TD+ 8 1 TX+ CT 6 CT 3 3 RX+ CT 3 RD- 1 1CT :1 RECEIVE 6 RX- PCB SIDE TO PHY RD+ 2 TD- 2 2 TX- 1CT : 2.5 TRANSMIT RD+ 7 3 RX+ CT 6 RD- 8 1CT : 1 RECEIVE 4 75 4 CHS GROUND 5 75 4 5 75 75 75 5 7 0.001mF CHS GROUND 5 8 75 C1 75 4 7 0.001mF 6 RX- CABLE SIDE 2 TX- 1CT :1 TRANSMIT CABLE SIDE PCB SIDE TO PHY TD- 7 1 TX+ TD+ 1 75 8 NOTE: Connect CHS GND to PCB ground. NOTE: Connect CHS GND to PCB ground. LED Configuration LED = M Specification (LEDs without internal resistors) LED = B & E Specification (LEDs without internal resistors) 9 10 12 11 Left LED 9 10 Right LED 11 12 LED = F Specification (LEDs with internal resistors) 9 10 12 11 Left LED Right LED LED = G Specification (Bi-color LED option with internal resistors) Left LED 9 10 Right LED 11 12 Left LED Right LED Standard LED Wavelength Forward* V(MAX) (TYP) Yellow Green 585 nm 565 nm 2.5 V 2.5 V 2.1 V 2.2 V * Using an internal resistor within the LED increases the voltage rating of the diode from 2.5 V to 5.0 V (assumes bias current = 20 mA). For More Information: Pulse Worldwide Headquarters Pulse Northern Europe Pulse Southern Europe Pulse Pulse North China China Headquarters Room 1503 12220 World Trade Drive San Diego, CA 92128 U.S.A. www.pulseeng.com TEL: 858 674 8100 FAX: 858 674 8262 3 Huxley Road Surrey Research Park Guildford, Surrey GU2 5RE United Kingdom TEL: 44 1483 401700 FAX: 44 1483 401701 Zone Industrielle F-39270 Orgelet France TEL: 33 3 84 35 04 04 FAX: 33 3 84 25 46 41 No. 1 Industrial District Changan, Dongguan China TEL: 86 769 85538070 FAX: 86 769 85538870 XinYin Building No. 888 YiShan Road Shanghai 200233 China TEL: 86 21 54643211/2 FAX: 86 21 54643210 Pulse South Asia Pulse North Asia 150 Kampong Ampat #07-01/02 KA Centre Singapore 368324 No. 26 Kao Ching Road Yang Mei Chen Taoyuan Hsien Taiwan, R. O. C. TEL: 886 3 4641811 FAX: 886 3 4641911 TEL: 65 6287 8998 FAX: 65 6280 0080 Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2006. Pulse Engineering, Inc. All rights reserved. www.pulseeng.com J403.D (5/06)