ACDC 60 Watts VEH Series xppower.com • Energy Efficiency Level V, ≥15 V • CEC 2008 & EISA 2007 Compliant • China Compulsory Certfication (CCC) Qualified • Single Outputs from 12 V to 30 V • Optional Inlet Connectors • No Load Input Power <0.5 W • High Power Density B R A N D Specification Input Input Voltage Input Frequency Input Current Inrush Current Earth Leakage Current Power Factor No Load Input Power Input Protection General • • • • • • • • 90-264 VAC 47-63 Hz 1.7 A max 50 A max at 230 VAC, cold start at 25 °C <1 mA at 240 VAC/50 Hz EN61000-3-2, class A <0.5 W Internal T3.15A/250 V fuse in line Output Output Voltage Initial Set Accuracy Minimum Load Hold Up Time Start Up Delay Start Up Rise Time Transient Response • • • • • • • Line Regulation Load Regulation Ripple & Noise • • • Overvoltage Protection • Overload Protection • Short Circuit Protection • Temperature Coefficient • See table ±5% at 50% load No minimum load requirement 8 ms min at 115 VAC, full load 3 s max 8 ms typical 4% maxiumum deviation, recovering to less than 1% within 500 µs for a 50% step load change ±0.5% max ±5% max 200 mv pk-pk max, 20 MHz bandwidth (see note 1) See table 110 -180% Continuous (hiccup/trip & restart mode with auto recovery) ±0.04%/˚C Efficiency Energy Efficiency Isolation Switching Frequency MTBF • See table • Level V ≥15 V • 3000 VAC Input to Output, 1500 VAC Input to Ground. • 60 kHz ±10 kHz • >700 kHrs to Bell Core iss. 6 Environmental Operating Temperature • 0 ˚C to +60 ˚C derate linearly from 100% load at +40 ˚C to 50% load at +60 ˚C Storage Temperature • -20 ˚C to +85 ˚C Operating Humidity • 5% to 90% RH non-condensing Storage Humidity • 5% to 95% RH non-condensing Shock • 6 random drops from 0.7 m with no damage, 50 g for 20 ms in each of 3 axes Vibration • 2 g variable frequency from 20 Hz to 30 Hz EMC & Safety Emissions Harmonic Currents Voltage Flicker ESD Immunity Radiated Immunity EFT/Burst Surge • • • • • • • Conducted Immunity Magnetic Field Dips & Interruptions • • • Safety Approvals • EN55022, level B conducted & radiated EN61000-3-2 class A EN61000-3-3 EN61000-4-2, level 3 Perf Criteria A EN61000-4-3, 3 V/m Perf Criteria A EN61000-4-4, level 3 Perf Criteria A EN61000-4-5, installation class 3, Perf Criteria B EN61000-4-6, level 2 Perf Criteria A EN61000-4-8, 3 A/m Perf Criteria A EN61000-4-11, 30% 10 ms, 60% 100 ms, 100% 5000 ms Perf Criteria A, B, B IEC60950-1, EN60950-1, UL/cUL60950-1, China Compulsory Certification (CCC) qualified, Approved as Limited Power Source Output Power 60 60 60 60 60 W W W W W Output Voltage(5) 12.0 15.0 19.0 24.0 30.0 V V V V V Output Current 5.00 4.00 3.16 2.50 2.00 A A A A A OVP Setting(2) 16.0 18.0 25.0 30.0 36.0 V V V V V Efficiency(3) 85% 87% 87% 87% 87% Model Number(4) VEH60US12†^ VEH60US15(6)†^ VEH60US19(6) VEH60US24(6)†^ VEH60US30(6) Notes 1. Measured at the output connector with a 0.1 µF ceramic capacitor and a 10 µF electrolytic capacitor. 2. Typical values. 3. Average of efficiencies measured at 25%, 50%, 75% and 100% load and 230 VAC input. 4. For optional IEC320-C6 input connector, add suffix ‘C6’ to end of the part number, e.g. VEH60US24C6. Contact sales for details. 5. Other voltages between 12 V and 30 V available on request, contact sales for details. 6. Energy Efficiency Level V. † Available from Farnell & element14. See page 28. ^ Available from Newark. See page 28. Mechanical Details Cable length: 48” ±2” (1220 mm ±50 mm) IEC320-C14 2.09 (53.0) 1.57 (40.0) 0.91 (23.0) 1.18 ±0.2 (30.0, ±5.0) 0.43 (11.0) 0.4 (10.0) 4.62 (117.4) Optional IEC320-C6 1.26 (32.0) 0.91 (23.0) Power Cord for C14 inlet, Order Part: UK - UK-MAINS-IEC European - EU-MAINS-IEC US - US-MAINS-IEC Power Cord for C6 inlet, Order Part: UK - UK-MAINS-5 European - EU-MAINS-5 US - US-MAINS-5 Notes 1. 2. 3. 4. All dimensions are shown in inches (mm), Tolerance is 0.04” (±1.0) max except output lead. Weight: 0.76 lbs (345 g) approx. Output connector is barrel type with 11 mm length, 5.5 mm dia. outer, 2.5 mm dia. inner with center + and outer shell - polarity. Optional output connectors available. 04-Oct-11 ACDC VEH60 Models and Ratings