SANYO SGF33

Ordering number : ENN7196A
SGF33
N-Channel GaAs MESFET
SGF33
For C to Ku-Band Local Oscillator and Amplifier
Features
•
•
•
•
Package Dimensions
Low phase noise.
Highly reliable protection film.
Automatic surface mounting supported.
MCPH4 package.
unit : mm
1316
[SGF33]
(Side view)
0.25
(Bottom view)
4
2
1
1.3
0.07
1.6
0.25
2.1
0.15
0.3
3
2.0
(Top view)
4
3
1 : Gate
2 : Source
3 : Drain
4 : Source
1
2
SANYO : MCPH4
0.85
(Side view)
Specifications
Absolute Maximum Ratings at Ta=25°C
Parameter
Symbol
Conditions
Ratings
Unit
Drain-to-Source Voltage
VDS
6
Gate-to-Source Voltage
VGS
--5
Drain Current
ID
Allowable Power Dissipation
PD
V
V
100
mA
400
mW
150
°C
--55 to +150
°C
Mounted on copper foil (area : 0.96mm2)
Glass epoxy board (145✕80✕1.6mm)
Junction Temperature
Tj
Storage Temperature
Tstg
Electrical Characteristics at Ta=25°C
Parameter
Symbol
Gate-to-Source Leakage Current
Saturated Drain Current
Cutoff Voltage
Forward Transfer Admittance
IGSO
IDSS
VGS(off)
yfs
Conditions
VGS=--5V
VDS=3V, VGS=0
VDS=3V, ID=100µA
Ratings
min
typ
max
Unit
--10
µA
30
50
70
mA
--0.5
--1.6
--2.7
VDS=3V, ID=10mA
34
V
mS
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft's
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
62003 TS IM TA-100632 / 13003 TS IM TA-3556 No.7196-1/5
SGF33
S-Parameter
SGF33
FREQUENCY
MHz
S11
MAG
S21
ANG
MAG
VDS=3V IDS=30mA
S22
S12
ANG
MAG
ANG
MAG
ANG
3000.0000
.725
--100.5
2.808
96.2
.075
42.7
.614
--33.7
4000.0000
.622
--127.5
2.469
78.0
.080
43.8
.578
--42.6
5000.0000
.571
--151.7
2.225
61.0
.085
42.0
.561
--52.2
6000.0000
.534
--174.8
2.010
44.7
.092
40.4
.555
--61.0
7000.0000
.504
162.4
1.822
29.0
.102
38.9
.553
--68.7
8000.0000
.491
139.4
1.669
14.1
.117
36.6
.547
--75.8
9000.0000
.503
117.2
1.550
--.3
.137
32.4
.530
--83.6
10000.0000
.542
97.3
1.458
--14.7
.160
25.9
.494
--93.5
11000.0000
.593
80.4
1.381
--29.4
.186
17.3
.444
--106.7
12000.0000
.640
65.4
1.310
--44.5
.212
7.1
.389
--124.1
13000.0000
.677
51.0
1.238
--60.1
.236
--4.6
.340
--145.5
14000.0000
.707
36.2
1.165
--76.3
.257
--17.3
.300
--170.5
15000.0000
.739
20.7
1.088
--93.5
.274
--31.0
.269
159.6
16000.0000
.796
4.1
.993
--113.3
.293
--45.8
.268
117.3
SGF33
FREQUENCY
GUmax
GAmax
S21^2
S12^2
MHz
dB
dB
dB
dB
K
Delay
ns
Mason’s U
dB
VDS=3V IDS=30mA
G1
G2
dB
dB
3000.0000
14.26
8.97
--22.45
.78
.052
19.888
3.24
2.05
4000.0000
11.74
7.85
--21.95
1.00
.049
19.292
2.13
1.77
5000.0000
10.30
12.06
6.95
--21.39
1.12
.047
18.408
1.71
1.64
6000.0000
9.12
10.69
6.06
--20.70
1.20
.045
16.931
1.46
1.60
7000.0000
8.07
9.61
5.21
--19.79
1.23
.043
15.119
1.28
1.58
8000.0000
7.19
8.86
4.45
--18.63
1.20
.041
13.609
1.20
1.55
9000.0000
6.51
8.56
3.81
--17.29
1.11
.040
12.646
1.27
1.43
10000.0000
6.00
3.27
--15.90
.99
.040
12.159
1.51
1.22
11000.0000
5.64
2.80
--14.61
.89
.041
11.873
1.88
.95
12000.0000
5.35
2.34
--13.48
.81
.042
11.357
2.29
.71
13000.0000
5.05
1.85
--12.54
.77
.044
10.335
2.67
.53
14000.0000
4.74
1.33
--11.81
.75
.046
8.994
3.01
.41
15000.0000
4.50
.74
--11.23
.74
.049
7.729
3.44
.33
16000.0000
4.63
--.06
--10.67
.69
.059
6.753
4.37
.32
No.7196-2/5
SGF33
S-Parameter VDS=3V IDS=30mA, START 3 GHz STOP 16 GHz
S11
S21
90°
50
25
100
150
0G
9.
Hz
0
25
10
50
12.0GHz
10
100
200
250
60°
3.0GHz
120°
150°
30°
z
H
G
.0
6
15.0GHz
150
6.0GHz
±180°
250
z
GH
3.
0G
Hz
.0
--150°
12
15.0GHz
--250
--200
--150
--10
5
9.0GHz
--30°
--100
--25
Rmax=1
--50
--60° R max=5
--120°
--90°
IT03933
S12
IT03934
S22
90°
50
60°
120°
25
100
150
150°
15.
0G
--25
--60° R max=0.5
--120°
--90°
IT03935
100
150
z
.0
12
--30°
--150°
50
GH
--10
Hz
Hz
25
Hz
.0G
10
--50
3.0G
15
0
z
0.5
GH
12.0GHz
250
--250
--200
--150
6.0
±180°
200
250
10
9.0GHz
Hz
3.0G
6.0GHz
9.0GHz
30°
--100
R max=1
IT03936
No.7196-3/5
SGF33
Oscillation Characteristics Measured by the Application JIG for SGF33
Equivalent Circuit of the Application JIG
(Recommended bias condition is VD=5V, ID=31mA)
VD
1000pF
10Ω
Dielectric Resonator
D
G
Z0, θB
S
GaAsMESFET
OUTPUT
51Ω
10Ω
REF 20.0 dBm
MKR-TRK 10.678 GHz
10.7 dBm
ATTEN 30 dB
[hp] 3048A Carrier : 10.678GHz
0
VD=5V
ID=31.0mA
PEAK
LOG
10
dB /
VD=5V
ID=31.0mA
at@ 1kHz --57.0 dBc / Hz
--10
--20
Phase noise [dBC/Hz]
--30
MARKER
10.678 GHz
10.7 dBm
WA SB
SC FS
CORR
--40
--50
--60
--70
--80
--90
--100
--110
--120
--130
RES BW 10 kHz
VBW 10 kHz
SPAN 1.000 MHz
SWP 30 ms
IT04378
--140
--150
100
2
3
5 7 1k
2
3
5 710k
2
3
5 7100k
[f] [dBc / Hz] VS f [Hz]
IT04379
No.7196-4/5
SGF33
Amplification Characteristics Measured by the DUT
Pout -- Pin
18
Output Power, Pout(dBm)
15
f=11GHz
VDS=3V
ID=30mA
GLP=5.7dB
P1dB=15.7dBm
.7
=5
)
dB
(
P
GL
4.7
10
5
0
--5
0
5
Input Power, Pin(dBm)
10
15
IT04380
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be expor ted without obtaining the expor t license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of June, 2003. Specifications and information herein are subject
to change without notice.
PS No.7196-5/5