Ordering number : ENN6975 SPM3214 SPM3214 RF Switch MMIC Features • • unit : mm 1309 [SPM3214] 0.3 5 2 3 0.65 0.25 1 0.15 4 1.6 6 2.1 • Package Dimensions Control voltage : +3 / 0V. MCPH6 package. Low insertion loss. High isolation. 0.25 • 1 : CTL2 2 : IN 3 : CTL1 4 : OUT1 5 : GND 6 : OUT2 0.85 2.0 0.15 Specifications SANYO : MCPH6 Absolute Maximum Ratings at Ta=25°C Parameter Symbol Control Voltage Ratings Unit VCTL 5.0 V PD 150 mW Storage Temperature Tstg −55 to +150 °C Operating Temperature Topr −20 to +70 °C Power Dissipation Electrical Characteristics at Ta=25°C, Control Voltage 1, 2 : 0 / +3V Parameter Insertion Loss Conditions IN -- OUT1, IN -- OUT2 Rating min typ IN -- OUT1, IN -- OUT2 VSWR IN -- OUT1, IN -- OUT2 Switching Time PIN1dB CTL1 IN -- OUT1, IN -- OUT2 Unit f=1GHz 0.55 0.85 f=2GHz 0.6 0.9 dB 0.65 0.95 dB f=2.5GHz Isolation max dB f=1GHz 21 24 f=2GHz 17 20 dB dB f=2.5GHz 15 18 dB f=1GHz to 2.5GHz 1.1 1.5 f=1GHz to 2.5GHz 20 100 f=1GHz to 2.5GHz 26 30 ns dBm CTL2 +3V 0V IN – OUT1 0 +3V IN – OUT2 Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 61501 GI IM No.6975-1/3 SPM3214 Application Circuit CTL2 1 6 2 5 3 4 C OUT2 C IN C OUT1 ( CTL1 Zo = 50Ω) C : at 0.8 to 1.5GHz 33pF at 1.9 to 2.5GHz 10pF Insertion Loss -- Frequency 0.8 Isolation -- Frequency 25 0 / 3V 0 / 3V Isolation (dB) Insertion Loss (dB) 0.7 0.6 0.5 20 15 0.4 0.3 0.5 1.0 1.5 2.0 2.5 Frequency (GHz) 3.0 IT03091 10 0.5 1.0 1.5 2.0 Frequency (GHz) 2.5 3.0 IT03092 Output Power -- Input Power 30 0 / 3V, f=1.0 to 2.5GHz Output Power (dBm) 25 20 15 10 5 0 0 5 10 15 20 Input Power (dBm) 25 30 IT03093 No.6975-2/3 SPM3214 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of June, 2001. Specifications and information herein are subject to change without notice. PS No.6975-3/3