Sharma Tantalum Capacitors RoHS Compliant SAF SERIES INTRODUCTION SAF Series molded Tantalum Chip Capacitors with Built-in fuse, are developed to provide safety to the PCB by opening the circuit in case of abnormal voltage or current. FEATURES: HIGH HEAT RESISTANCE MAKES IT SUITABLE FOR ALL TYPES OF SOLDERING • • FUSE CHARACTERISTICS DESIGNED TO PREVENT FIRE OR SMOKE SIZES DESIGNED TO OPEN IN<100 SEC AT 1.5A OR<5SEC AT • B,5A.CD&&DFCASE CASE SIZES OPEN IN <5 SEC AT 5A. (REFERENCE GRAPH G1 FOR FUSING TIME PATTERN.) • LOW ESR OF <2 OHMS AT 1MHZ LOW INDUCTANCE OF 5nH AT 200 MHz. MEET IEC SPEC QC 300801/US0001 AND EIA J RC- 3813 & JIS C • COMPONENTS 5102. REEL PACKING STDS - EIA J RC-1009B /EIA 481/IEC 286-3. EPOXY MOLDED COMPONENTS WITH CONSISTENT DIMENSIONS AND FINISH. GRAPH G1 SURFACE •ENGINEERED FOR AUTOMATIC ONSERTION. •COMPATIBLE WITH ALL POPULAR HIGH SPEED ASSEMBLY MACHINES. GENERAL SPECIFICATIONS CAPACITANCE RANGE: 1.0µF to 68µF. VOLTAGE RANGE: 10VDC to 50VDC. CAPACITANCE TOLERANCE: ±20%(M), ±10%(K), ( ±5%(J) - UPON REQUEST) TEMPERATURE RANGE: -55 to +125°C with DERATING ABOVE 85°C ENVIRONMENTAL CLASSIFICATION: 55/125/56(IEC68-2) DISSIPATION FACTOR: 0.1µF to 1µF 4% Max 1.5 µF to 22 µF 5% MAX, 33µF 8% Max. LEAKAGE CURRENT: NOT MORE THAN 0.01CV µA or 0.5 µA WHICHEVER IS GREATER FAILURE RATE: 1% PER 1000 HRS. LIFE TEST DETAILS CAPACITORS SHALL WITHSTAND RATED DC VOLTAGE APPLIED AT 85°C FOR 2000 HRS. OR DERATED DC VOLTAGE APPLIED AT 125°C FOR 1000 HRS. AFTER THE TEST: 1. CAPACITANCE CHANGE SHALL NOT EXCEED ±10% OF INITIAL VALUE. 2. DISSIPATION FACTOR SHALL BE WITHIN THE NORMAL SPECIFIED LIMITS. 3. DC LEAKAGE CURRENT SHALL BE WITHIN 125% OF NORMAL LIMIT. 4. NO REMARKABLE CHANGE IN APPEARANCE. MARKINGS TO REMAIN LEGIBLE. WITH BUILT-IN FUSE FUSING TIME SAH SERIES RATINGS AND CASE CODES CAPACITANCE 4V 6.3V RATED VOLTAGE DC at 85 °C 10V 16V 20V 25V CODE µF 35V 50V 104 0.1 A A 154 0.15 A B 224 0.22 A B 334 0.33 A B 474 0.47 B C 684 0.68 B C 105 1.0 155 1.5 225 2.2 335 3.3 475 4.7 685 6.8 106 10 156 15 226 22 336 33 476 47 686 68 A A A A B A B A B C C C C C D2, D C D2, D D2, D C B C C C B B B D2, D D2, D D2, D D2, D D2, D D2, D D2, D CASE DIMENSIONS IN MILLIMETERS (INCHES) CASE B EIA/IEC 3528 C 6032 D 7343 F 7358 Tel:(949)642-SECI L 3.5 ±0.2 (0.138 ±0.008) 6.0 ±0.3 (0.236 ±0.012) W 2.8 ±0.2 (0.110 ±0.008) 3.2 ±0.3 (0.126 ±0.012) H 1.9 ±0.2 (0.075 ±0.008) 2.5 ±0.3 (0.098 ±0.012) l 0.8 ±0.3 (0.031 ±0.012) 1.3 ±0.3 (0.051 ±0.012) a 2.2 ±0.1 (0.087 ±0.004) 2.2 ±0.1 (0.087±0.004) 7.3 ±0.3 (0.287 ±0.012) 7.3 ±0.3 (0.287 ±0.012) 4.3 ±0.3 (0.170 ±0.012) 5.8 ±0.3 (0.228 ±0.012) 2.8 ±0.3 (0.110 ±0.012) 3.5 ±0.3 (0.138 ±0.012) 1.3 ±0.3 (0.051 ±0.012) 1.3 ±0.3 (0.052 ±0.012) 2.4 ±0.1 (0.095 ±0.004) 3.5 ±0.2 (0.138 ±0.008) SECI Engineers & Buyers' Guide Fax:(949)642-7327 Sharma Tantalum Capacitors RoHS Compliant SAF SERIES SPECIFICATIONS 10 V DC Rated Voltage Surge Voltage 13 VDC @ 85°C and 8 VDC @ 125°C 16 V DC Rated Voltage Surge Voltage 20 VDC @ 85°C and 13 VDC @ 125°C 20 V DC Rated Voltage Surge Voltage 26 VDC @ 85°C and 16 VDC @ 125°C 25 V DC Rated Voltage Surge Voltage 32 VDC @ 85°C and 20 VDC @ 125°C 35 V DC Rated Voltage Surge Voltage 45 VDC @ 85°C and 28 VDC @ 125°C 50 V DC Rated Voltage Surge Voltage 63 VDC @ 85°C and 40 VDC @ 125°C SHARMA PART NUMBER DCL (MAX) µA DF% (MAX) AT +25°C ESR(max) at 100 KHz OHMS RIPPLE (max) Irms Amps at 100 KHz SAF B 475 M 10 R 202 4.7 0.5 6 4.0 SAF C 156 M 10 R 501 15 1.5 6 2.2 0.179 SAF D2 226 M 10 R 501 22 2.2 6 1.8 0.227 SAF D2 336 M 10 R 501 33 3.3 6 1.1 0.290 SAF D 336 M 10 R 501 33 3.3 6 1.1 0.295 SAF D2 476 M 10 R 501 47 4.7 6 0.9 0.321 SAF F 476 M 10 R 401 47 4.7 6 0.9 0.343 SAF F 686 M 10 R 401 68 6.8 6 0.8 0.363 SAF B 335 M 16 R 202 3.3 0.5 6 4.4 0.108 SAF C 106 M 16 R 501 10 1.6 6 2.2 0.179 SAF D2 156 M 16 R 501 15 2.4 6 1.8 0.198 SAF D2 226 M 16 R 501 22 3.5 6 1.1 0.290 SAF D 226 M 16 R 501 22 3.5 6 1.1 0.295 SAF D 336 M 16 R 501 33 5.3 6 0.9 0.327 SAF F 336 M 16 R 401 33 5.3 6 0.8 0.363 SAF F 476 M 16 R 401 47 7.5 6 0.8 0.363 SAF B 225 M 20 R 202 2.2 0.5 6 5.0 0.101 SAF C 685 M 20 R 501 6.8 1.4 6 2.4 0.219 SAF D2 106 M 20 R 501 10 2.0 6 1.3 0.272 SAF D2 156 M 20 R 501 15 3.0 6 1.1 0.290 SAF D 156 M 20 R 501 15 3.0 6 1.1 0.295 SAF D 226 M 20 R 501 22 4.4 6 0.9 0.327 SAF F 226 M 20 R 401 22 4.4 6 0.8 0.363 SAF F 336 M 20 R 401 33 6.6 6 0.8 0.363 SAF B 155 M 25 R 202 1.5 0.5 6 5.5 0.097 SAF C 475 M 25 R 501 4.7 1.2 6 2.4 0.171 SAF D2 685 M 25 R 501 6.8 1.7 6 1.4 0.262 SAF D2 106 M 25 R 501 10 2.5 6 1.2 0.297 SAF D 106 M 25 R 501 10 2.5 6 1.2 0.283 SAF F 156 M 25 R 401 15 3.8 6 1.0 0.325 SAF B 105 M 35 R 202 1 0.5 4 6.5 0.089 SAF C 155 M 35 R 501 1.5 0.5 6 4.5 0.125 SAF C 225 M 35 R 501 2.2 0.8 6 3.5 0.142 SAF C 335 M 35 R 501 3.3 1.2 6 2.5 0.168 SAF D2 475 M 35 R 501 4.7 1.6 6 1.5 0.249 SAF D2 685 M 35 R 501 6.8 2.4 6 1.3 0.267 SAF D 685 M 35 R 501 6.8 2.4 6 1.3 0.272 SAF F 106 M 35 R 401 10 3.5 6 1.0 0.325 SAF C 105 M 50 R 501 1 0.5 4 5.5 0.113 SAF C 155 M 50 R 501 1.5 0.8 6 4.0 0.152 SAF D2 225 M 50 R 501 2.2 1.1 6 2.5 0.199 SAF D2 335 M 50 R 501 3.3 1.7 6 2.0 0.215 SAF D 335 M 50 R 501 3.3 1.7 6 2.0 0.215 SAF F 475 M 50 R 401 4.7 2.4 6 1.4 0.257 NOTE: Tel:(949)642-SECI CAP VALUE µF 0.113 FOR 10% TOLERANCE CHANGE TOLERANCE CODE FROM M TO K. FOR 5% TOLERANCE CHANGE TOLERANCE CODE FROM M TO J. STANDARD REEL SIZE AND ORIENTATION = R. FOR OTHER SEE ORDERING INFORMATION ON PAGE 3. SECI Engineers & Buyers' Guide Fax:(949)642-7327