FLI8531 Entry level LCD TV controller Data Brief Features Applications ■ Integrated 3D video decoder ■ LCD and PDP TV ■ PIP applications ■ ■ 1080i MADi superior video quality DLP®, LCD, and LCOS front and rear projection ■ Flexible analog capture up to 1080p YPrPb or 135 MHz RGB ■ VBI signal processing including WST level 2.5 support ■ Flexible DDR memory interface ■ Faroudja® TrueLife™ video enhancer ■ Advanced Color Management (ACM-3D) and Adaptive Contrast Control (ACC) ■ On-chip microprocessor ■ Bitmapped OSD controller ■ Package: 208 PQFP DDR DRAM External Memory (x16) Composite OSD Blend CLUTs ACC, ACM Enhancer 3D Video Decoder Scaling YPrPb/ RGB Analog Front End OSD Controller Memory Controller 3x3 Matrix VBI Data Processing S-Video (Y/C) Output Formatter Single Channel LVDS 16 bit 2nd Channel Processing DIP IR I/ F Embedded Micro processor Serial Flash ROM Interface September 2008 3x3 Matrix MUX SCART Rev 1 For further information contact your local STMicroelectronics sales office. ADC Ain0-3 General Purpose I/O Over 10 possible Audio Delay I2S in I2S out 1/7 www.st.com 7 Description 1 FLI8531 Description The FLI8531 as an entry level product offers an integrated video decoder with a 3D comb filter and proven DCDi Cinema technology. The Faroudja DCDi Cinema video format converter and Advanced Color Management (ACM-3D) provide exceptional video quality. The video quality level that was exclusive to Faroudja Home Theater Systems is now available in a single-chip solution. The FLI8531 also comprises an integrated Analog Front-End (AFE) with triple ADCs and a cross-point switch. The flexible AFE ensures simple PCB design with direct connections to TV tuners and input video connectors. Thus, for a single LCD TV chassis, the FLI8531 is able to support worldwide standards. For regional variations, connectors and firmware changes are the only requirements. The integrated VBI dataslicer and decoder remove the need for external components resulting in significant cost reduction. The FLI8531 supports many worldwide VBI standards for applications of Teletext, Closed Captioning, V-Chip, and other VBI services. The FLI8531 can also be used as part of a digital TV solution with the proven Faroudja DCDi Cinema video performance. An embedded microprocessor and a versatile OSD in a single device will facilitate rapid development of a reliable and attractive product. The FLI8531 utilizes the common Cortez family firmware making migration easy and effortless across different hardware platforms within this family. Figure 1. System diagram DDR SDRAM RF TV Tuner Component Video SCART or Analog RGB Y/C 13 configurable analog ports MPEG-2 Decoder 2/7 FLI8531 16-bit digital input Program Flash LVDS Display up to WXGA FLI8531 2 Feature attributes Feature attributes ■ Flexible digital and analog capture – 13 configurable analog inputs – Direct connection from tuner or connector to analog input pin – Integrated anti-aliasing filter – ADC capture up to 135 MHz RGB – Full SCART support including RGB fast blank – 1080p analog capture for YPbPr – Support for triple 10-bit ADCs for better SNR ■ Integrated 3D video decoder – Faroudja IntelliComb™ technology – 3D adaptive comb filter for luma–chroma separation – Supports Composite, S-Video, and Component (including High Definition) video input signals – Supports all analog TV broadcast video standards—NTSC (North America and Japan), PAL (I, B, G, H, M, D, N), SECAM (D, K, L, B, G) – Macrovision® and VCR trick mode support ■ VBI signal processing – Multi-standard digital VBI dataslicer – WST Teletext FastText page support access – Support for WST level 2.5 – V-chip, VPS, Closed Captioning, XDS, CGMS, and WSS decode ■ Faroudja DCDI Cinema format conversion – Low angle de-interlacing processing – Per pixel Motion Adaptive De-interlacing (MADi) up to 1080i format – Panoramic and anamorphic non-linear scaling – Adaptive media display processing for 3:2 and 2:2 film content – Adaptive 3D noise reduction – Media noise reduction for MPEG inputs ■ On-chip microprocessor – Integrated x186-based microprocessor with rich function library – General Purpose Inputs/Outputs (GPIOs) available for managing system devices (keypad, backlight, NVRAM, etc.) – Advanced power control for low power stand-by mode – 2-wire serial master bus interface for external device control – SPI or LPC flash supported for code storage ■ Advanced bitmapped OSD controller – 16 true color bitmap tiles with 1, 2, 4, and 8 bits per pixel – Horizontal and vertical stretch of OSD menus – Blinking, transparency, and blending 3/7 Feature attributes 4/7 FLI8531 ■ Faroudja Truelife video enhancer – High performance and programmable sharpening filters – Non-linear chroma and luma enhancement – Removal of the DVD Chroma Upsampling Error (CUE) ■ Advanced Color Management (ACM-3D) – ACM-3D allows flexible flesh-tone compensation, blue stretch, and other image enhancements – ACM-3D provides flexible programming, polar coordinate representation, and six-axis color control – ACC ensures full dynamic range is used in video content ■ Picture-in-Picture (PIP) – Dynamic scaling for advanced PIP transitions – Video PIP over full screen graphics and video backgrounds – Graphics PIP over full screen video background – Side-by-side window support – PIP zoom support – Multi-PIP ■ Output formats – Single-channel 10-bit LVDS transmitters for direct connection to LCD modules – Up to WXGA resolution output ■ Other features – Integrated infrared decoder – Integrated low bandwidth ADC with 4 input channels – 3 integrated PWM outputs for LCD backlight control – Integrated I2S audio delay to exact audio and video synchronization – DDR1 1 piece x16 memory – Memory size is flexible up to 256 Mb FLI8531 3 Ordering information Ordering information Table 1. Order codes Part number FLI8531-LF-BE Description 208 PQFP In order to meet environmental requirements, ST offers this device in ECOPACK® packages. These packages have a lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at www.st.com. 5/7 Revision history 4 FLI8531 Revision history Table 2. 6/7 Document revision history Date Revision 25-Aug-2008 1 Changes Initial release. FLI8531 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2008 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 7/7