STMICROELECTRONICS SATAULC6-2M6

DVIULC6-2x6
HDMIULC6-2x and SATAULC6-2x6
Ultra Low Capacitance 2 line ESD protection
Data Brief
Main applications
■
DVI and HDMI ports up to 1.65 Gb/s
SATA port up to 3.2 Gb/s
■ EEE1394a, b or c port up to 3.2 Gb/s
■ Portable electronics
■
SOT-666
Micro QFN 6L
Description
The DVIULC6-2x6, HDMIULC6-2x6 and
SATAULC6-2x6 are a monolithic Application
Specific Discrete dedicated to ESD protection of
high speed interfaces. Its ultra low line
capacitance secures a high level of signal
integrity without compromising in protecting
downstream sensitive chips against the most
stringent characterized ESD strikes.
Functional diagram
Features
■
■
■
■
■
■
■
■
DVIULC6-2x6 / HDMIULC6-2x6
2 data lines ± 15kV ESD protection
Protect 5 V VBUS when applicable
Ultra low capacitance: 0.6 pF at F = 825 MHz
Very low leakage current: 0.5 µA max.
Fast response time compared with varistor
SOT-666 package: 1.60 x 1.60 x 0.55 mm
µQFN 6 leads package: 1.45 x 1.00 x 0.55 mm
RoHS compliant
SATAULC6-2x6
Complies with these standards:
■
IEC 61000-4-2 level 4
– 15 kV air discharge
– 8 kV (and up to 15 kV) contact discharge
Order code
Benefits
Part Number
Marking
■
DVIULC6-2P6
R
DVIULC6-2M6
T
HDMIULC6-2P6
R
HDMIULC6-2M6
T
SATAULC6-2P6
U
SATAULC6-2M6
S
■
■
■
■
■
ESD protection, IEC 61000-4-2 level 4
compliant
– > ± 15 kV Contact discharge
– > ± 15 kV Air discharge
Minimized rise and fall times for maximum data
integrity
Consistent D+ / D- signal balance:
– Best capacitance matching tolerance I/O to
GND = 0.015 pF for ultra low inter pair skew
– Best capacitance matching tolerance I/O to
I/O = 0.007 pF for ultra low intra pair skew
– Matching high bit rate DVI, HDMI, SATA
and IEEE 1394 requirements
Low PCB space consuming
Low leakage current for longer operation of
battery powered devices
High reliability offered by monolithic integration
November 2006
Rev 1
For further information contact your local STMicroelectronics sales office.
1/3
www.st.com
Revision history
1
2/3
DVIULC6-2x6, HDMIULC6-2x6 and SATAULC6-2x6
Revision history
Date
Revision
14-Nov-2006
1
Description of Changes
First Issue
DVIULC6-2x6, HDMIULC6-2x6 and SATAULC6-2x6
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2006 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
3/3