ST207E ± 15kV ESD protected 5V RS-232 transceiver Feature summary ■ ESD protection for RS-232 i/o pins: ±15 kV human body model ■ 230kbps data rate ■ Guaranteed slew rate 3V/ms (min) ■ Operates from a single 5V power supply ■ Packaged in SO-24, SSO-24 and TSSOP24 SOP Description The ST207E is a 5 driver and 3 receiver devices designed for RS-232 and V.28 communications in harsh environments. Each transmitter output and receiver input is protected against ±15KV electrostatic discharge (ESD) shocks. The drivers and receivers of the ST207E meet all EIA/TIA232E and CCITT V.28 specifications at data rates up to 120Kbps, when loaded in accordance with the EIA/TIA-232E specification. TSSOP SSOP . The ST207E operates with four 0.1µF capacitors. It came in 24-pin SO and TSSOP packages. Order codes Type Temperature Range Package ST207ECDR ST207ECPR ST207EBPR ST207ECTR ST207EBTR ST207EATR 0 to 70 °C 0 to 70 °C -40 to 85 °C 0 to 70 °C -40 to 85 °C -40 to 125 °C SO-24 (Tape & Reel) SSOP-24 (Tape & Reel) SSOP-24 (Tape & Reel) TSSOP24 (Tape & Reel) TSSOP24 (Tape & Reel) TSSOP24 (Tape & Reel) March 2006 Rev. 14 Comments 1000 1350 1350 2500 2500 2500 parts per reel parts per reel parts per reel parts per reel parts per reel parts per reel 1/17 www.st.com 17 ST207E Contents 1 Pin configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 4 Typical application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 5 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 2/17 ST207E Pin configuration 1 Pin configuration Figure 1. Pin connections (top view) Table 1. Pin description PlN N° SYMBOL NOTE 1 T3OUT RS-232 driver output 2 T1OUT RS-232 driver output 3 T2OUT RS-232 driver output 4 R1IN RS-232 receiver input 5 R1OUT 6 T2IN TTL/CMOS Driver input internal pull-up to VCC 7 T1IN TTL/CMOS driver input internal pull-up to VCC 8 GND Ground 9 VCC 4.75V to 5.25V supply voltage 10 C1+ Terminal for positive charge-pump capacitor 11 V+ 2VCC Generated by the charge-pump 12 C 1- Terminal for negative charge-pump capacitor 13 C2+ Terminal for positive charge-pump capacitor 14 C 2- Terminal for negative charge-pump capacitor 15 V- -2VCC Generated by the charge-pump 16 R3IN 17 R3OUT TTL/CMOS receiver output RS-232 Receiver input TTL/CMOS receiver output 3/17 Pin configuration Table 1. 4/17 ST207E Pin description PlN N° SYMBOL NOTE 18 T3IN TTL/CMOS driver input internal pull-up to VCC 19 T4IN TTL/CMOS driver input internal pull-up to VCC 20 T5OUT 21 T5IN 22 R2OUT 23 R2IN RS-232 receiver input 24 T4OUT RS-232 driver output RS-232 driver output TTL/CMOS driver input internal pull-up to VCC TTL/CMOS receiver output ST207E Maximum ratings 2 Maximum ratings Table 2. Absolute maximum ratings Symbol Parameter Value Unit -0.3 to 6 V VCC Supply voltage V+ Extra positive voltage (VCC - 0.3) to 14 V V- Extra negative voltage -14 to 0.3 V TIN Transmitter input voltage range -0.3 to (VCC + 0.3) V RIN Receiver input voltage range ± 30 V (V- - 0.3) to (V+ + 0.3) V -0.3 to (VCC + 0.3) V TOUT Transmitter output voltage range ROUT Receiver output voltage range TSHORT Short circuit duration on tout Continuous TSTG Storage temperature range -65 to 150 Note: °C Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these condition is not implied. V+ and V- can have a maximum magnitude of +7V, but their absolute addition can not exceed 13 V. 5/17 Electrical characteristics ST207E 3 Electrical characteristics Table 3. ESD Performance: transmitter outputs, receiver inputs Symbol Parameter Test Min. Max. Unit ESD ESD Protection voltage Human body model ± 15 KV ESD ESD Protection voltage IEC-1000-4-2 Contact discharge ±8 KV Table 4. Symbol ISUPPLY Table 5. Symbol Electrical characteristics (C1 - C4 = 0.1µF, VCC = 5V ± 5%, TA = min. to max., unless otherwise specified. Typical values are referred to TA = 25°C). Parameter VCC Power supply current Test Min. No Load, TA = 25°C Parameter Test Unit 2 5 mA Typ. ± 8.5 All Driver loaded with 3KΩ to GND ±5 ROUT Transmitter output resistance VCC = V+ = V- = 0V VOUT = ± 2V 300 ISC Output short circuit current IIL Input pull-up current VTIL Input logic threshold low VTIH Input logic threshold high Symbol Max. Min. Output voltage swing Table 6. Typ. Transmitter electrical characteristics (C1 - C4 = 0.1µF, VCC = 5V ± 5%, TA = min. to max., unless otherwise specified. Typical values are referred to TA = 25°C). VTOUT TIN = 0V Max. Unit V Ω ± 18 ± 60 mA 15 200 µA 0.8 V 2 V Receiver electrical characteristics (C1 - C4 = 0.1µF, VCC = 5V ± 5%, TA = min. to max., unless otherwise specified. Typical values are referred to TA = 25°C). Parameter Test VRIN Receiver input voltage operating range VRIL Input threshold low TA = 25°C VCC = 5V VRIH Input threshold high TA = 25°C VCC = 5V VRIHYS Input hysteresis VCC = 5V, no hysteresis in shutdown RRIN Input resistance TA = 25°C VCC = 5V VOL Output voltage low VOH Output voltage high 6/17 Typ. Min. Typ. -30 IOUT = -1mA 0.8 Max. Unit 30 V 1.2 V 1.7 2.4 V 0.2 0.5 1 V 3 5 7 KΩ 0.4 V 3.5 VCC-0.4 V ST207E Electrical characteristics Table 7. Timing characteristics (C1 - C4 = 0.1µF, VCC = 5V ± 5%, TA = min. to max., unless otherwise specified. Typical values are referred to TA = 25°C). Symbol DR Parameter Maximum data rate Test Min. Typ. RL = 3KΩ to 7KΩ CL= 50pF to 1000pF one transmitter switching 150 240 Kbps RL = 3KΩ to 7KΩ CL= 50pF to 150pF one transmitter switching 230 300 Kbps tPHLR tPLHR Receiver propagation delay All drivers loaded with 3KΩ to GND tPHLT tPLHT Transmitter propagation delay RL = 3KΩ CL= 2500pF All transmitter loaded Transition-region slew rate TA = 25°C RL = 3 to 7KΩ VCC = 5V CL = 50pF to 1000pF measured from +3V to -3V or -3V to +3V SR 3 Max. Unit 0.2 10 µs 2 3 µs 7 30 V/µs 7/17 Typical application ST207E 4 Typical application Figure 2. Application circuit Table 8. Capacitance value (µF) 8/17 C1 C2 C3 C4 C5 0.1 0.1 0.1 0.1 0.1 ST207E 5 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK ® packages. These packages have a Lead-free second level interconnect. The category of second Level Interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com. 9/17 Package mechanical data ST207E SO-24 MECHANICAL DATA DIM. mm. MIN. TYP inch MAX. MIN. TYP. MAX. A 2.35 2.65 0.093 0.104 A1 0.1 0.30 0.004 0.012 B 0.33 0.51 0.013 0.020 C 0.23 0.32 0.009 0.013 D 15.20 15.60 0.598 0.614 E 7.4 7.6 0.291 0.299 e 1.27 0.050 H 10.00 10.65 0.394 0.419 h 0.25 0.75 0.010 0.030 L 0.4 1.27 0.016 0.050 k 0° 8° 0° 8° ddd 0.100 0.004 0070769C 10/17 ST207E Package mechanical data SSOP24 MECHANICAL DATA mm. inch DIM. MIN. TYP MAX. A MIN. TYP. MAX. 2 A1 0.05 A2 1.65 b 0.079 0.002 1.75 1.85 0.065 0.22 0.38 0.009 0.015 c 0.09 0.25 0.004 0.010 D 7.9 8.2 8.5 0.311 0.323 0.335 E 7.4 7.8 8.2 0.291 0.307 0.323 E1 5.00 5.3 5.6 0.197 0.209 0.220 e 0.069 0.65 BSC K 0˚ L 0.55 A 0.073 0.0256 BSC 0.75 8˚ 0˚ 8˚ 0.95 0.022 0.030 0.037 A2 A1 b K e L E c D E1 PIN 1 IDENTIFICATION 1 0053237/C 11/17 Package mechanical data ST207E TSSOP24 MECHANICAL DATA mm. inch DIM. MIN. TYP MAX. A MIN. TYP. MAX. 1.1 A1 0.05 0.15 A2 0.043 0.002 0.006 0.9 0.035 b 0.19 0.30 0.0075 0.0118 c 0.09 0.20 0.0035 0.0079 D 7.7 7.9 0.303 0.311 E 4.3 4.5 0.169 0.177 e 0.65 BSC 0.0256 BSC H 6.25 6.5 0.246 0.256 K 0° 8° 0° 8° L 0.50 0.70 0.020 0.028 A A2 A1 b K e L H c D E PIN 1 IDENTIFICATION 1 7047476B 12/17 ST207E Package mechanical data Tape & Reel SO-24 MECHANICAL DATA mm. inch DIM. MIN. A TYP MAX. MIN. 330 MAX. 12.992 C 12.8 D 20.2 0.795 N 60 2.362 T 13.2 TYP. 0.504 30.4 0.519 1.197 Ao 10.8 11.0 0.425 0.433 Bo 15.7 15.9 0.618 0.626 Ko 2.9 3.1 0.114 0.122 Po 3.9 4.1 0.153 0.161 P 11.9 12.1 0.468 0.476 13/17 Package mechanical data ST207E Tape & Reel SSOP24 MECHANICAL DATA mm. inch DIM. MIN. A MAX. MIN. 330 13.2 TYP. MAX. 12.992 C 12.8 D 20.2 0.795 N 60 2.362 T 14/17 TYP 0.504 22.4 0.519 0.882 Ao 8.4 8.6 0.331 0.339 Bo 8.7 8.9 0.343 0.351 Ko 2.9 3.1 0.114 0.122 Po 3.9 4.1 0.153 0.161 P 11.9 12.1 0.468 0.476 ST207E Package mechanical data Tape & Reel TSSOP24 MECHANICAL DATA mm. inch DIM. MIN. A TYP MAX. MIN. 330 MAX. 12.992 C 12.8 D 20.2 0.795 N 60 2.362 T 13.2 TYP. 0.504 22.4 0.519 0.882 Ao 6.8 7 0.268 0.276 Bo 8.2 8.4 0.323 0.331 Ko 1.7 1.9 0.067 0.075 Po 3.9 4.1 0.153 0.161 P 11.9 12.1 0.468 0.476 15/17 Revision history ST207E 6 Revision history Table 9. Revision history Date Revision 09-Feb-2005 13 Mistake on Table 1. 14-Mar-2006 14 Order codes has been updated and new template. 16/17 Changes ST207E Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT DESIGNED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 17/17