ST3232E ±15kV ESD-Protection, 3 to 5.5V, low power, up to 250KBPS, RS-232 drivers and receivers Feature summary ■ ESD protection for RS-232 I/O pins ■ ±15KV human body model ■ ±8KV IEC 1000-4-2 contact discharge ■ 300µA supply current ■ 250Kbps minimum guaranteed data rate ■ 6V/µs minimum guaranteed slew rate ■ Meet EIA/TIA-232 specifications down to 3V ■ Available in DIP-16, SO-16, SO-16 large SSOP16 and TSSOP16 SO-16 DIP-16 SO-16 Large SSOP16 TSSOP16 Description small 0.1µF standard external capacitors for operations from 3V supply. The ST3232E is a 3V powered EIA/TIA-232 and V.28/V.24 communication interfaces with low power requirements, high data-rate capabilities and enhanced electrostatic discharge (ESD) protection to ±8kV using IEC1000-4-2 Contact Discharge and ±15kV using the Human Body Model. ST3232E has a proprietary low dropout transmitter output stage providing true RS-232 performance from 3 to 5V supplies with a dual charge pump. The charge pump requires only four The ST3232E has two receivers and two drivers. The device is guaranteed to run at data rates of 250Kbps while maintaining RS-232 output levels. Typical applications are Notebook, Subnotebook and Palmtop Computers, Battery Powered Equipment, Hand-Held Equipment, Peripherals and Printers.. Order code Part number Temp. range Package Packaging ST3232ECN 0 to 70 °C DIP-16 25parts per tube / 40tube per box ST3232EBN -40 to 85 °C DIP-16 25parts per tube / 40tube per box ST3232ECDR 0 to 70 °C SO-16 (Tape & Reel) 2500 parts per reel ST3232EBDR -40 to 85 °C SO-16 (Tape & Reel) 2500 parts per reel ST3232ECWR 0 to 70 °C SO-16 Large (Tape & Reel) 1000 parts per reel ST3232EBWR -40 to 85 °C SO-16 Large (Tape & Reel) 1000 parts per reel ST3232ECPR 0 to 70 °C SSOP16 (Tape & Reel) 1350 parts per reel ST3232EBPR -40 to 85 °C SSOP16 (Tape & Reel) 1350 parts per reel ST3232ECTR 0 to 70 °C TSSOP16 (Tape & Reel) 2500 parts per reel ST3232EBTR -40 to 85 °C TSSOP16 (Tape & Reel) 2500 parts per reel September 2006 Rev 3 1/20 www.st.com 20 Contents ST3232E Contents 1 Pin configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 4 Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 5 Typical performance characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 6 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 7 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 2/20 ST3232E Pin configuration 1 Pin configuration Figure 1. Pin connection Table 1. Pin description Pln N° Symbol Name and function 1 C1+ Positive terminal for the first charge pump capacitor 2 V+ Doubled voltage terminal 3 C1- Negative Terminal for the first charge pump capacitor 4 C2+ Positive terminal for the second charge pump capacitor 5 C2- Negative terminal for the second charge pump capacitor 6 V- Inverted voltage terminal 7 T2OUT 8 R2IN 9 R2OUT Second receiver output voltage 10 T2IN Second transmitter input voltage 11 T1IN First transmitter input voltage 12 R1OUT First receiver output voltage 13 R1IN 14 T1OUT 15 GND Ground 16 VCC Supply voltage Second transmitter output voltage Second receiver input voltage First receiver input voltage First transmitter output voltage 3/20 Absolute maximum ratings ST3232E 2 Absolute maximum ratings Table 2. Absolute maximum ratings Symbol Parameter Value Unit -0.3 to 6 V VCC Supply voltage V+ Doubled voltage terminal (VCC - 0.3) to 7 V V- Inverted voltage terminal 0.3 to -7 V 13 V -0.3 to 6 V ± 25 V ± 13.2 V -0.3 to (VCC + 0.3) V V+ +|V-| TIN Transmitter input voltage range RIN Receiver input voltage range TOUT Transmitter output voltage range ROUT Receiver output voltage range tSHORT Transmitter output short to gnd time Continuous Note: Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these condition is not implied. V+ and V- can have a maximum magnitude of +7V, but their absolute addition can not exceed 13 V. Figure 2. ESD performance: transmitter outputs, receiver inputs Symbol Parameter Test conditions Min. Typ. Max. Unit ESD ESD protection voltage Human body model ±15 kV ESD ESD protection voltage IEC-1000-4-2 ±8 kV 4/20 ST3232E Electrical characteristics 3 Electrical characteristics Table 3. Electrical characteristics (C1 - C4 = 0.1µF, VCC = 3V to 5.5V, TA = -40 to 85°C, unless otherwise specified. Typical values are referred to TA = 25°C) Symbol ISUPPLY Table 4. Symbol Parameter Parameter VHYS Transmitter input hysteresis VTIH Input logic threshold high Symbol Typ. Max. Unit 0.3 1 mA Logic input (C1 - C4 = 0.1µF, VCC = 3V to 5.5V, TA = -40 to 85°C, unless otherwise specified. Typical values are referred to TA = 25°C) Input logic threshold low Table 5. Min. VCC Power supply current No Load, VCC = 3V or 5V, TA = 25°C VTIL IIL Test conditions Test conditions Typ. T-IN Max. Unit 0.8 V 0.25 VCC = 3.3V VCC = 5V Input leakage current Min. V 2 V 2.4 ± 0.01 T-IN ±1 µA Transmitter (C1 - C4 = 0.1µF tested at 3.3V±10%, VCC = 3V to 5.5V, TA = -40 to 85°C, unless otherwise specified. Typical values are referred to TA = 25°C) Parameter Test conditions Min. Typ. Max. Unit VTOUT Output voltage swing All transmitter outputs are loaded with 3KΩ to GND ±5 ± 5.4 V RTOUT Transmitter output resistance VCC = 0V, VOUT = ± 2V 300 10M Ω ± 60 mA ISC Output short circuit current ITOL Output leakage current VCC = 0V or 3.3V to 5.5V VOUT = ± 12V Transmitters disable ± 25 µA 5/20 Electrical characteristics Table 6. ST3232E Receiver (C1 - C4 = 0.1µF tested at 3.3V±10%, VCC = 3V to 5.5V, TA = -40 to 85°C, unless otherwise specified. Typical values are referred to TA = 25°C) Symbol Parameter Test conditions VRIN Receiver input voltage operating range VRIL RS-232 Input threshold low VRIH RS-232 Input threshold high Typ. -25 TA = 25°C, VCC = 3.3V 0.6 1.1 TA = 25°C, VCC = 5V 0.8 1.5 Max. Unit 25 V V TA = 25°C, VCC = 3.3V 1.4 2.4 TA = 25°C, VCC = 5V 1.8 2.4 VRIHYS Input hysteresis RRIN Input resistance TA = 25°C VROL TTL/CMOS Output voltage low IOUT = 1.6mA VROH TTL/CMOS Output voltage high IOUT = -1mA Table 7. Min. V 0.5 3 V 5 VCC-0.6 7 kΩ 0.4 V VCC-0.1 V Timing characteristics (C1 - C4 = 0.1µF tested at 3.3V±10%, VCC = 3V to 5.5V, TA = -40 to 85°C, unless otherwise specified. Typical values are referred to TA = 25°C) Symbol Parameter Test conditions Data transfer rate RL = 3KΩ, CL2= 1000pF one transmitter switching tPHLR tPLHR Propagation delay input to output RXIN = RXOUT, CL = 150pF tOER tODR DR Min. Typ. Max. 250 Unit Kbps 0.15 µs Receiver output enable time Normal Operation 50 ns Receiver output disable time Normal Operation 50 ns |tPHLT - tTHL| Transmitter propagation delay difference 200 ns |tPHLR - tTHR| Receiver propagation delay difference 50 ns SRT Note: 6/20 Transition slew rate 1 (Note 1) TA = 25°C RL = 3KΩ to 7KΩ VCC = 3.3V measured from +3V to -3V or -3V to +3V CL = 150pF to 1000pF CL = 150pF to 2500pF Transmitter Skew is measured at the transmitter zero cross points 6 4 30 30 V/µs V/µs ST3232E 4 Application Application Figure 3. Table 8. Application circuits Capacitance value (µF) VCC C1 C2 C3 C4 Cbypass 3.0 to 3.6 0.1 0.1 0.1 0.1 0.1 4.5 to 5.5 0.047 0.33 0.33 0.33 0.1 3.0 to 5.5 0.1 0.47 0.47 0.47 0.1 7/20 Typical performance characteristics 5 ST3232E Typical performance characteristics (unless otherwise specified TJ = 25°C) Figure 4. Output current vs output high voltage Figure 5. Output current vs output high voltage Figure 6. Output current vs output low voltage Figure 7. Output current vs output low voltage Figure 8. Voltage transfer characteristics for transmitter inputs Figure 9. Receiver input resistance 8/20 ST3232E 6 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect. The category of second Level Interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com. 9/20 Package mechanical data ST3232E Plastic DIP-16 (0.25) MECHANICAL DATA mm. inch DIM. MIN. a1 0.51 B 0.77 TYP MAX. MIN. TYP. MAX. 0.020 1.65 0.030 0.065 b 0.5 0.020 b1 0.25 0.010 D 20 0.787 E 8.5 0.335 e 2.54 0.100 e3 17.78 0.700 F 7.1 0.280 I 5.1 0.201 L Z 3.3 0.130 1.27 0.050 P001C 10/20 ST3232E Package mechanical data SO-16 MECHANICAL DATA DIM. mm. MIN. TYP A a1 inch MAX. MIN. TYP. 1.75 0.1 0.068 0.25 a2 MAX. 0.004 0.010 1.64 0.063 b 0.35 0.46 0.013 0.018 b1 0.19 0.25 0.007 0.010 C 0.5 0.019 c1 45° (typ.) D 9.8 10 0.385 0.393 E 5.8 6.2 0.228 0.244 e 1.27 0.050 e3 8.89 0.350 F 3.8 4.0 0.149 0.157 G 4.6 5.3 0.181 0.208 L 0.5 1.27 0.019 0.050 M S 0.62 0.024 8° (max.) 0016020D 11/20 Package mechanical data ST3232E SO-16L MECHANICAL DATA DIM. mm. MIN. TYP A a1 inch MAX. MIN. TYP. 2.65 0.1 0.104 0.2 a2 MAX. 0.004 0.008 2.45 0.096 b 0.35 0.49 0.014 0.019 b1 0.23 0.32 0.009 0.012 C 0.5 0.020 c1 45˚ (typ.) D 10.1 10.5 0.397 0.413 E 10.0 10.65 0.393 0.419 e 1.27 0.050 e3 8.89 0.350 F 7.4 7.6 0.291 0.300 0.5 1.27 0.020 0.050 G L M S 0.75 8 0.029 ˚ (max.) PO13I 12/20 ST3232E Package mechanical data SSOP16 MECHANICAL DATA mm. inch DIM. MIN. TYP A MAX. MIN. TYP. MAX. 2 0.079 A1 0.05 0.21 0.002 0.008 A2 1.65 1.85 0.065 0.073 b 0.22 0.38 0.009 0.015 c 0.09 0.25 0.0035 0.0098 D 5.9 6.5 0.232 0.256 E 7.4 8.2 0.291 0.323 E1 5.3 5.6 0.197 5 e 0.209 0.65 0.220 0.0256 K 0˚ 8˚ 0˚ 8˚ L 0.55 0.95 0.022 0.037 A A2 A1 b e K c L E D E1 PIN 1 IDENTIFICATION 1 7299589/A 13/20 Package mechanical data ST3232E TSSOP16 MECHANICAL DATA mm. inch DIM. MIN. TYP A MAX. MIN. TYP. MAX. 1.2 A1 0.05 A2 0.8 b 0.047 0.15 0.002 0.004 0.006 1.05 0.031 0.039 0.041 0.19 0.30 0.007 0.012 c 0.09 0.20 0.004 0.0079 D 4.9 5 5.1 0.193 0.197 0.201 E 6.2 6.4 6.6 0.244 0.252 0.260 E1 4.3 4.4 4.48 0.169 0.173 0.176 1 e 0.65 BSC K 0˚ L 0.45 A 0.60 0.0256 BSC 8˚ 0˚ 0.75 0.018 8˚ 0.024 0.030 A2 A1 b e K c L E D E1 PIN 1 IDENTIFICATION 1 0080338D 14/20 ST3232E Package mechanical data Tape & Reel SO-16 MECHANICAL DATA mm. inch DIM. MIN. A TYP MAX. MIN. 330 MAX. 12.992 C 12.8 D 20.2 0.795 N 60 2.362 T 13.2 TYP. 0.504 22.4 0.519 0.882 Ao 6.45 6.65 0.254 0.262 Bo 10.3 10.5 0.406 0.414 Ko 2.1 2.3 0.082 0.090 Po 3.9 4.1 0.153 0.161 P 7.9 8.1 0.311 0.319 15/20 Package mechanical data ST3232E Tape & Reel SO-16L MECHANICAL DATA mm. inch DIM. MIN. A MAX. MIN. 330 13.2 TYP. MAX. 12.992 C 12.8 D 20.2 0.795 N 60 2.362 T 16/20 TYP 0.504 22.4 0.519 0.882 Ao 10.8 11.0 0.425 0.433 Bo 10.7 10.9 0.421 0.429 Ko 2.9 3.1 0.114 0.122 Po 3.9 4.1 0.153 0.161 P 11.9 12.1 0.468 0.476 ST3232E Package mechanical data Tape & Reel SSOP16 MECHANICAL DATA mm. inch DIM. MIN. A TYP MAX. MIN. 330 MAX. 12.992 C 12.8 D 20.2 0.795 N 60 2.362 T 13.2 TYP. 0.504 22.4 0.519 0.882 Ao 8.4 8.6 0.331 0.339 Bo 6.7 6.9 0.264 0.272 Ko 2.9 3.1 0.114 0.122 Po 3.9 4.1 0.153 0.161 P 11.9 12.1 0.468 0.476 17/20 Package mechanical data ST3232E Tape & Reel TSSOP16 MECHANICAL DATA mm. inch DIM. MIN. A MAX. MIN. 330 13.2 TYP. MAX. 12.992 C 12.8 D 20.2 0.795 N 60 2.362 T 18/20 TYP 0.504 22.4 0.519 0.882 Ao 6.7 6.9 0.264 0.272 Bo 5.3 5.5 0.209 0.217 Ko 1.6 1.8 0.063 0.071 Po 3.9 4.1 0.153 0.161 P 7.9 8.1 0.311 0.319 ST3232E Revision history 7 Revision history Table 9. Revision history Date Revision 06-Sep-2006 3 Changes Order codes has been updated and new template. 19/20 ST3232E Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 20/20