STD790A Medium current, high performance, low voltage PNP transistor Features ■ Very low collector to emitter saturation voltage ■ DC current gain, hFE > 100 ■ 3 A continuous collector current ■ 40 V breakdown voltage V(BR)CER ■ Surface mounting DPAK (TO-252) power package in tape and reel packing 3 1 DPAK (TO-252) Applications ■ Power management in portable equipment ■ Voltage regulation in bias supply circuits ■ Switching regulator in battery charger applications ■ Heavy load driver Figure 1. Internal schematic diagram Description The device in manufactured in low voltage PNP planar technology by using a “Base Island” layout. The resulting transistor shows exceptional high gain performance coupled with very low saturation voltage. Table 1. Device summary Order code Marking Package Packaging STD790AT4 D790A DPAK Tape and reel June 2008 Rev 3 1/9 www.st.com 9 Electrical ratings 1 STD790A Electrical ratings Table 2. Absolute maximum rating Symbol Value Unit VCBO Collector-base voltage (IE = 0) -40 V VCER Collector-emitter voltage (R BE = 47 Ω) -40 V VCEO Collector-emitter voltage (IB = 0) -30 V VEBO Emitter-base voltage (IC = 0) -5 V Collector current -3 A ICM Collector peak current (tP < 5 ms) -6 A Ptot Total dissipation at Tc = 25 °C 15 W Tstg Storage temperature -65 to 150 °C 150 °C Value Unit 8.33 °C/W IC TJ Table 3. Symbol Rthj-case 2/9 Parameter Max. operating junction temperature Thermal data Parameter Thermal resistance junction-case __max STD790A 2 Electrical characteristics Electrical characteristics (Tcase = 25 °C unless otherwise specified) Table 4. Electrical characteristics Symbol Parameter ICBO Collector cut-off current (IE = 0) IEBO Emitter cut-off current (IC = 0) Test conditions Min. Typ. VCB = -30 V VCB = -30 V; TC = 100 °C VEB = -4 V Max. Unit -10 -100 µA µA -10 µA Collector-emitter V(BR)CEO (1) breakdown voltage (IB = 0) IC = -10 mA -30 V Collector-emitter breakdown voltage (RBE = 47 Ω) IC = -10 mA -40 V V(BR)CBO Collector-base breakdown voltage (IE = 0) IC = -100 µA -40 V V(BR)EBO Emitter-base breakdown voltage (IC = 0) IE = -100 µA -5 V V(BR)CER (1) VCE(sat) (1) Collector-emitter saturation voltage IC = -0.5 A IB = -5 mA -0.15 V IC = -1.2 A IB = -20 mA -0.25 V IC = -2 A IB = -20 mA -0.5 V IC = -3 A IB = -100 mA -0.7 V IC = -3 A IB = -100 mA -0.9 V TJ = 100 °C VBE(sat) (1) Base-emitter saturation voltage IC = -1A IB = -10 mA -0.8 -1 V VBE(on) (1) Base-emitter on voltage IC = -1 A V CE = -2 V -0.8 -1 V IC = -10 mA V CE = -2 V 100 200 400 IC = -500 mA V CE = -2 V 100 200 400 IC = -1 A V CE = -2 V 100 IC = -2 A V CE = -1 V 100 160 IC = -3 A V CE = -1 V 90 130 hFE (1) DC current gain 3/9 Electrical characteristics Table 4. Symbol ft td tr ts tf STD790A Electrical characteristics (continued) Parameter Transition frequency Resistive load Delay time Rise time Storage time Fall time Test conditions IC = -50 mA Min. V CE = -5 V f = 50 MHz IC = -3 A V CC = -20 V Typ. Max. 100 MHz 180 220 ns IB1 = -IB2 = -60 mA 160 210 ns see Figure 8 250 300 ns 80 100 ns 1. Pulse duration = 300 µs, duty cycle ≤ 1.5% 2.1 4/9 Unit Electrical characteristics (curves) Figure 2. DC current gain Figure 3. DC current gain Figure 4. Collector-emitter saturation voltage Figure 5. Base-emitter saturation voltage STD790A Electrical characteristics Figure 6. 2.2 Switching time resistive load Figure 7. Switching time resistive load Test circuit Figure 8. Resistive load switching test circuit 1) Fast electronic switch 2) Non-inductive resistor 5/9 Package mechanical data 3 STD790A Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 6/9 STD790A Package mechanical data TO-252 (DPAK) mechanical data DIM. mm. min. typ max. A 2.20 A1 0.90 2.40 1.10 A2 0.03 0.23 b 0.64 0.90 b4 5.20 5.40 c 0.45 0.60 c2 0.48 0.60 D 6.00 D1 E 6.20 5.10 6.40 E1 6.60 4.70 e 2.28 e1 4.40 4.60 H 9.35 10.10 L 1 L1 2.80 L2 L4 0.80 0.60 R V2 1 0.20 0o 8o 0068772_G 7/9 Revision history 4 STD790A Revision history Table 5. 8/9 Document revision history Date Revision Changes 24-Mar-2004 1 Initial release. 27-Mar-2006 2 New template, new graphics 25-Jun-2008 3 Updated TO-252 mechanical data STD790A Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT DESIGNED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2008 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 9/9