STGB20NC60V - STGP20NC60V STGW20NC60V 30 A - 600 V - very fast IGBT Features ■ High frequency operation up to 50 kHz ■ Lower CRES / CIES ratio (no cross-conduction susceptibility) ■ High current capability 2 3 3 1 1 Applications TO-247 2 TO-220 3 ■ High frequency inverters ■ UPS, motor drivers ■ HF, SMPS and PFC in both hard switch and resonant topologies 1 D²PAK Description This IGBT utilizes the advanced PowerMESH™ process resulting in an excellent trade-off between switching performance and low on-state behavior. Table 1. Figure 1. Internal schematic diagram Device summary Order codes Marking Package Packaging STGB20NC60VT4 GB20NC60V D²PAK Tape and reel STGP20NC60V GP20NC60V TO-220 Tube STGW20NC60V GW20NC60V TO-247 Tube May 2008 Rev 5 1/16 www.st.com 16 Contents STGB20NC60V - STGP20NC60V - STGW20NC60V Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................. 6 3 Test circuit 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 5 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 2/16 ................................................ 9 STGB20NC60V - STGP20NC60V - STGW20NC60V 1 Electrical ratings Electrical ratings Table 2. Absolute maximum ratings Symbol Parameter Value Unit VCES Collector-emitter voltage (VGE = 0) 600 V IC (1) Collector current (continuous) at 25 °C 60 A IC (1) Collector current (continuous) at 100 °C 30 A ICL(2) Turn-off latching current 100 A ICP (3) Pulsed collector current 100 A VGE Gate-emitter voltage ± 20 V PTOT Total dissipation at TC = 25 °C 200 W Tj Operating junction temperature – 55 to 150 °C 1. Calculated according to the iterative formula: T –T JMAX C I ( T ) = ----------------------------------------------------------------------------------------------------C C R × V (T , I ) THJ – C CESAT ( MAX ) C C 2. Vclamp = 80%(VCES), Tj =150 °C, RG=10 Ω, VGE=15 V 3. Pulse width limited by max junction temperature allowed Table 3. Thermal resistance Value Symbol Parameter TO-247 Rthj-case Thermal resistance junction-case max Rthj-amb Thermal resistance junction-ambient max TO-220 D²PAK 0.62 50 Unit °C/W 62.5 °C/W 3/16 Electrical characteristics 2 STGB20NC60V - STGP20NC60V - STGW20NC60V Electrical characteristics (TCASE=25°C unless otherwise specified) Table 4. Symbol Static electrical characteristics Parameter Collector-emitter V(BR)CES breakdown voltage (VGE = 0) Test conditions IC = 1 mA VCE(sat) Collector-emitter saturation VGE=15 V, IC= 20 A voltage VGE=15 V, IC= 20 A,TC= 125 °C VGE(th) Gate threshold voltage VCE= VGE, IC= 250 µA ICES Collector-emitter cut-off current (VGE = 0) VCE = 600 V IGES Gate-emitter cut-off current (VCE = 0) VGE = ±20 V gfs (1) Forward transconductance VCE = 15 V, IC= 20 A Min. Typ. Max. 600 Unit V 1.8 1.7 3.75 VCE = 600 V, Tc=125 °C 2.5 V V 5.75 V 10 1 µA mA ± 100 nA 15 S 1. Pulse duration = 300 µs, duty cycle 1.5% Table 5. Symbol Cies Coes Cres Qg Qge Qgc 4/16 Dynamic electrical characteristics Parameter Test conditions Input capacitance Output capacitance Reverse transfer capacitance VCE = 25 V, f = 1 MHz, VGE=0 Total gate charge Gate-emitter charge Gate-collector charge VCE = 390 V, IC = 20 A, VGE = 15 V, (see Figure 17) Min. Typ. Max. Unit 2200 225 50 pF pF pF 100 16 45 nC nC nC STGB20NC60V - STGP20NC60V - STGW20NC60V Table 6. Symbol td(on) tr (di/dt)on td(on) tr (di/dt)on tr(Voff) td(off) tf tr(Voff) td(off) tf Table 7. Symbol Eon Eoff(1) Ets Eon Eoff(1) Ets Electrical characteristics Switching on/off (inductive load) Parameter Test conditions Turn-on delay time Current rise time Turn-on current slope VCC = 390 V, IC = 20 A Turn-on delay time Current rise time Turn-on current slope VCC = 390 V, IC = 20 A Off voltage rise time Turn-off delay time Current fall time Vcc = 390 V, IC = 20 A, Off voltage rise time Turn-off delay time Current fall time Vcc = 390 V, IC = 20 A, Min. RG= 3.3 Ω, VGE= 15 V, (see Figure 16) RG= 3.3 Ω, VGE= 15 V, TC= 125 °C (see Figure 16) RG = 3.3 Ω, VGE = 15 V (see Figure 18) RG=3.3 Ω, VGE =15 V, TC=125 °C (see Figure 18) Typ. Max. Unit 31 11 1600 ns ns A/µs 31 11.5 1500 ns ns A/µs 28 100 75 ns ns ns 66 150 130 ns ns ns Switching energy (inductive load) Parameter Test conditions Turn-on switching losses Turn-off switching losses Total switching losses VCC = 390 V, IC = 20 A Turn-on switching losses Turn-off switching losses Total switching losses VCC = 390 V, IC = 20 A RG= 3.3 Ω, VGE= 15 V, (see Figure 18) RG= 3.3 Ω, VGE= 15 V, TC= 125 °C (see Figure 18) Min. Typ. Max. Unit 220 330 550 µJ µJ µJ 450 770 1220 µJ µJ µJ 1. Turn-off losses include also the tail of the collector current 5/16 Electrical characteristics STGB20NC60V - STGP20NC60V - STGW20NC60V 2.1 Electrical characteristics (curves) Figure 2. Output characteristics Figure 3. Transfer characteristics Figure 4. Transconductance Figure 5. Collector-emitter on voltage vs temperature Figure 6. Gate charge vs gate-source voltage Figure 7. 6/16 Capacitance variations STGB20NC60V - STGP20NC60V - STGW20NC60V Figure 8. Normalized gate threshold voltage vs temperature Figure 10. Normalized breakdown voltage vs temperature Figure 9. Electrical characteristics Collector-emitter on voltage vs collector current Figure 11. Switching losses vs temperature Figure 12. Switching losses vs gate resistance Figure 13. Switching losses vs collector current 7/16 Electrical characteristics Figure 14. Thermal impedance 8/16 STGB20NC60V - STGP20NC60V - STGW20NC60V Figure 15. Turn-off SOA STGB20NC60V - STGP20NC60V - STGW20NC60V 3 Test circuit Test circuit Figure 16. Test circuit for inductive load switching Figure 17. Gate charge test circuit Figure 18. Switching waveform 9/16 Package mechanical data 4 STGB20NC60V - STGP20NC60V - STGW20NC60V Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 10/16 STGB20NC60V - STGP20NC60V - STGW20NC60V Package mechanical data TO-220 mechanical data mm inch Dim Min A b b1 c D D1 E e e1 F H1 J1 L L1 L20 L30 ∅P Q Typ 4.40 0.61 1.14 0.48 15.25 Max Min 4.60 0.88 1.70 0.70 15.75 0.173 0.024 0.044 0.019 0.6 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 1.27 10 2.40 4.95 1.23 6.20 2.40 13 3.50 Max 0.181 0.034 0.066 0.027 0.62 0.050 16.40 28.90 3.75 2.65 Typ 0.409 0.106 0.202 0.051 0.256 0.107 0.551 0.154 0.645 1.137 3.85 2.95 0.147 0.104 0.151 0.116 11/16 Package mechanical data STGB20NC60V - STGP20NC60V - STGW20NC60V TO-247 Mechanical data mm. Dim. A Min. 4.85 A1 2.20 2.60 b 1.0 1.40 b1 2.0 2.40 b2 3.0 3.40 Max. 5.15 c 0.40 0.80 D 19.85 20.15 E 15.45 15.75 e 5.45 L 14.20 14.80 L1 3.70 4.30 L2 18.50 øP 3.55 øR 4.50 S 12/16 Typ 3.65 5.50 5.50 STGB20NC60V - STGP20NC60V - STGW20NC60V Package mechanical data D²PAK (TO-263) mechanical data mm inch Dim Min A A1 b b2 c c2 D D1 E E1 e e1 H J1 L L1 L2 R V2 Typ 4.40 0.03 0.70 1.14 0.45 1.23 8.95 7.50 10 8.50 Max Min 4.60 0.23 0.93 1.70 0.60 1.36 9.35 0.173 0.001 0.027 0.045 0.017 0.048 0.352 0.295 0.394 0.334 10.40 2.54 4.88 15 2.49 2.29 1.27 1.30 Max 0.181 0.009 0.037 0.067 0.024 0.053 0.368 0.409 0.1 5.28 15.85 2.69 2.79 1.40 1.75 0.192 0.590 0.099 0.090 0.05 0.051 8° 0° 0.4 0° Typ 0.208 0.624 0.106 0.110 0.055 0.069 0.016 8° 0079457_M 13/16 Packaging mechanical data 5 STGB20NC60V - STGP20NC60V - STGW20NC60V Packaging mechanical data D2PAK FOOTPRINT TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. mm MIN. A B 1.5 C 12.8 D 20.2 G 24.4 N 100 T TAPE MECHANICAL DATA DIM. mm MIN. MAX. MIN. A0 10.5 10.7 0.413 0.421 B0 15.7 15.9 0.618 0.626 D 1.5 1.6 0.059 0.063 D1 1.59 1.61 0.062 0.063 E 1.65 1.85 0.065 0.073 F 11.4 11.6 0.449 0.456 K0 4.8 5.0 0.189 0.197 P0 3.9 4.1 0.153 0.161 P1 11.9 12.1 0.468 0.476 P2 1.9 2.1 0.075 0.082 MAX. R 50 1.574 T 0.25 0.35 0.0098 0.0137 W 23.7 24.3 * on sales type 14/16 inch 0.933 0.956 inch MAX. MIN. MAX. 330 12.992 13.2 0.504 0.520 26.4 0.960 1.039 0.059 0795 3.937 30.4 1.197 BASE QTY BULK QTY 1000 1000 STGB20NC60V - STGP20NC60V - STGW20NC60V 6 Revision history Revision history Table 8. Document revision history Date Revision Changes 07-Jun-2004 4 Stylesheet update. No content change 14-May-2008 5 Inserted D²PAK 15/16 STGB20NC60V - STGP20NC60V - STGW20NC60V Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2008 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 16/16