STMICROELECTRONICS TIP31CR

TIP31C
Power transistors
General features
■
New enhanced series
■
High switching speed
■
hFE improved linearity
■
hFE Grouping
3
Applications
■
1
Linear and switching industrial application
2
TO-220
Description
The TIP31C is a base island technology NPN
power transistor in TO-220 plastic package with
better performances than the industry standard
TIP31C that make this device suitable for audio,
power linear and switching applications. The
PNP type is TIP32C.
Internal schematic diagram
Order codes
Part Number
Marking
Package
Packing
TIP31C
Note: on page 4
TIP31C R
TIP31C O
TIP31C Y
TO-220
Tube
April 2006
Rev 1
1/10
www.st.com
10
Contents
TIP31C
Contents
1
Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1
Electrical characteristics (curve) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2/10
TIP31C
1
Absolute maximim ratings
Absolute maximim ratings
Table 1.
Absolute maximim ratings
Symbol
Parameter
Value
Unit
VCBO
Collector-base voltage (IE = 0)
100
V
VCEO
Collector-emitter voltage (IB = 0)
100
V
VEBO
Emitter-base voltage (IC = 0)
5
V
Collector current
3
A
Collector peak current
5
A
Base current
1
A
Total dissipation at Tcase = 25°C
40
2
W
W
-65 to 150
°C
150
°C
IC
ICM
IB
PTOT
Total dissipation at Tamb = 25°C
Tstg
Storage temperature
TJ
Max. operating junction temperature
3/10
Electrical characteristics
2
TIP31C
Electrical characteristics
(Tcase = 25°C unless otherwise specified)
Table 2.
Symbol
Electrical characteristics
Parameter
Test conditions
ICEO
Collector cut-off current
(IB = 0)
IEBO
Emitter cut-off current (IC = 0) VEB = 5V
ICES
Collector cut-off current
(V BE = 0)
VCE = 100V
VCEO(sus)(1)
Collector-emitter
sustaining voltage (IB = 0)
IC = 30mA
VCE(sat)(1)
Collector-emitter saturation
voltage
IC = 3A_
VBE(on)(1)
Base-emitter voltage
IC = 3A_____
Min.
VCE = 60V
Typ.
Max.
Unit
0.3
mA
1
mA
0.2
mA
100
V
IB = 375mA
1.2
V
VCE = 4V
1.8
V
IC = 1A_ ___ VCE = 4V
25
IC = 3A _____ VCE = 4V
hFE(1)
DC current gain
Group R
Group O
Group Y
10
20
40
24
44
50
1. Pulsed duration = 300 ms, duty cycle ≥ 1.5%
Note:
4/10
Product is pre-selected in DC current gain (Group R, Group O and Group Y).
STMicroelectronics reserves the right to ship each groups according to production
availability. Please contact your nearest STMicroelectronics sales office for delivery details.
TIP31C
2.1
Electrical characteristics
Electrical characteristics (curve)
Figure 1.
Safe Operating area
Figure 2.
Derating curves
Figure 3.
DC-current gain
Figure 4.
DC-current gain
Figure 5.
Collector-emitter saturation
voltage
Figure 6.
Base-emitter saturation
voltage
5/10
Electrical characteristics
Figure 7.
6/10
Base-emitter on voltage
TIP31C
TIP31C
3
Package mechanical data
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK®
packages. These packages have a Lead-free second level interconnect. The category of
second level interconnect is marked on the package and on the inner box label, in
compliance with JEDEC Standard JESD97. The maximum ratings related to soldering
conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: www.st.com
7/10
Package mechanical data
TIP31C
TO-220 MECHANICAL DATA
DIM.
mm.
MIN.
inch
MAX.
MIN.
TYP.
MAX.
A
4.40
4.60
0.173
0.181
b
0.61
0.88
0.024
0.034
b1
1.15
1.70
0.045
0.066
c
0.49
0.70
0.019
0.027
D
15.25
15.75
0.60
0.620
E
10
10.40
0.393
0.409
e
2.40
2.70
0.094
0.106
e1
4.95
5.15
0.194
0.202
F
1.23
1.32
0.048
0.052
H1
6.20
6.60
0.244
0.256
J1
2.40
2.72
0.094
0.107
0.551
L
13
14
0.511
L1
3.50
3.93
0.137
L20
16.40
L30
8/10
TYP
0.154
0.645
28.90
1.137
øP
3.75
3.85
0.147
0.151
Q
2.65
2.95
0.104
0.116
TIP31C
4
Revision history
Revision history
Table 3.
Revision history
Date
Revision
20-Apr-2006
1
Changes
New release
9/10
TIP31C
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT DESIGNED,
AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS,
NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR
SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2006 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
10/10