DC COMMON MODE CHOKE COIL <SMD Type:CLP Series> Type: CLP42 ◆ Product Description ・9.7×4.6mm Max.(L×W), 2.5mm Max. Height . ◆ Feature ・One common mode choke or pulse transformer is stored in it . ・Ideally used in PCMCIA card. ・RoHS Compliance ◆ Dimensions (mm) 2.5 MAX. 0.5 6.5 9.4±0.3 4.6 0.2 1.27 2.54 * Pin pitch shall be measured at the root of terminal. * Dimension does not include solder used on coil. ◆ Land Pattern (mm) ◆ Schematics (Bottom) 10.2 1.27 1.27 1.0 5.5 3 4 2 5 1 6 Mark “・” is Polarity ◆ Specification Stamp Inductance (μH)[Ref.] (100kHz)(1-3) Leakage Inductance (μH) (1-3) [Ref.]100kHz (4-6) Shorted D.C.R. (Ω)(1-3) [Ref.] (at 20℃) Line Capacity (μH) (3-4) [Ref.](pF) Et-Product [Ref.] (μsec・V) CLP42-5ØØ 500 50 0.22 0.186 3.26 1.06 CLP42-75Ø 750 75 0.27 0.210 3.90 1.25 CLP42-1Ø1 101 100 0.20 0.224 4.67 1.34 CLP42-151 151 150 0.19 0.240 5.70 1.63 201A 200 0.18 0.260 5.34 1.82 Part Name CLP42-2Ø1A Please refer to the sales offices on our website for a representative near you www.sumida.com 1/1