Filter Coils < Pin Type: KM Series> Type: KM-10DB, KM-10DF, KM-10DG ◆ Product Description ・11.0×11.0mm Max.(L×W), 16.0mm Max. Height (KM-10DB), ・10.5×10.5mm Max.(L×W), 16.0mm Max. Height (KM-10DF, KM-10DG), ・Operating frequency:1.0MHz. ・In addition to the reference versions of parameters shown here, custom designs are available to meet your exact requirements ◆ Feature φ6.0 MAX.16.0 +1.0 -0.5 3.5 1.5±0.3 KM-10DB MAX.11.0 4.0±0.5 7.0±0.2 ◆ Dimensions (mm) +0.10 φ0.7 -0.05 ・Variable shielded type. ・Two capacitors can be internally mounted in one section. ・Ideally used as Dobly filters or two-pole type audio low pass filters in Audio Radio Sets. ・Can be also used as IFT coils. ・RoHS Compliance 7.0±0.2 MAX.11.0 15.5±0.5 10.5±0.5 ＋1.0 −0.5 3.5 7.0±0.2 KM-10DF ＋0.1 φ0.7−0.05 10.5±0.5 1.5±0.2 4.0±0.5 7.0±0.2 10.5±0.5 15.5±0.5 ＋1.0 −0.5 3.5 7.0±0.2 KM-10DG ＋0.1 φ0.7−0.05 10.5±0.5 1.5±0.2 1.0 MAX. 7.0±0.2 ＊ Dimension does not include solder used on coil. ＊ Pin pitch should be measured at the root of terminal. Please refer to the sales offices on our website for a representative near you www.sumida.com 1/1 Filter Coils < Pin Type: KM Series> Type: KM-10DB, KM-10DF, KM-10DG 1.KM-10DB ◆ Testing circuit (KM-10DB) Rin=Rg+R1=5KΩ Rout=20KΩ ◆ Specification (Part No: 5305-T004) Specification. Item Input impedance (Rin) 5kΩ Output impedance (Rout) 20kΩ Attenuation 80 kHz 5.0dB Max Insertion loss Ripple 114 kHz 38 dB Min. 10 kHz 1.0dB Max. 1.0dB Max. Frequency Response (Attenuation 0dB at 10KHz) 2.KM-10DF Please refer to the sales offices on our website for a representative near you www.sumida.com 2/2 Filter Coils < Pin Type: KM Series> Type: KM-10DB, KM-10DF, KM-10DG ◆ Testing circuit R in ∼ ③ ④ ② ⑤ Ro ut ① EV ⑥ ◆ Specification (Part No: 5303-T135) Item Specification Input impedance (Rin) 3.3kΩ Output impedance (Rout) 6.2kΩ Attenuation Ripple Insertion Loss 15kHz 1.0 dB Max. 19 kHz 30 dB Max. 23 kHz 15 dB Max. 38 kHz 25 dB Max. (1kHz～13kHz) 1.0dB Max. (1kHz) 1.0dB Max. Frequency Response (Attenuation 0dB at 1KHz) 3.KM-10DG Please refer to the sales offices on our website for a representative near you www.sumida.com 3/3 Filter Coils < Pin Type: KM Series> Type: KM-10DB, KM-10DF, KM-10DG ◆ Testing circuit C1=10000pF±1％ （P.P.CAPACITOR）、 C2＝33000pF±1％ （P.P.CAPACITOR） ◆ Specification (Part No: 5334-065) Item Specification Input impedance (Rin) 50Ω Output impedance (Rout) 680Ω Attenuation 9 kHz 23dB Min. Frequency Response (Attenuation 0dB at 1KHz) Please refer to the sales offices on our website for a representative near you www.sumida.com 4/4