(1/2) DC to AC Inverters Connector type, Dimming, 7W, for 2 Bulbs Conformity to RoHS Directive CXA Series CXA-0217 FEATURES • For 2 bulbs. • Applicable panel size∗ : 10 to 15-inch • With brightness control function. • The high-voltage terminals are coated with silicone so as to avoid the defects caused by dust. • It is a product conforming to RoHS directive. ∗ TEMPERATURE AND HUMIDITY RANGES Temperature Operating 0 to +70 range (°C) Storage –30 to +85 95max. Humidity range(%)RH [Maximum wet-bulb temperature 38°C. No dew.] The applicable panel size is for typical reference dimensions. SHAPES AND DIMENSIONS 180.3max. 146.5±0.15 80±0.15 CN2 2-1 1-5 1-1 CN3 3-1 25.3max. 18±0.15 (3.5) CN1 (3.5) 3 3-ø3±0.1 1 PWB∗1 50∗2 8max. 50∗2 2 ∗1 ∗2 Substrate(PWB: Printed wiring board): Flame retardant material UL94V-0(FR-4 or CEM-3) t=1mm : High-voltage generator (The entire surface within a range of 50mm away from the end of the base in the output) Weight: 21g typ. Dimensions in mm 1 2 3 Input connector Output connector Output connector Connector manufacturer's company and type Japan Solderless Terminal Co., Ltd. Japan Solderless Terminal Co., Ltd. Japan Solderless Terminal Co., Ltd. TERMINAL NUMBERS AND FUNCTIONS CN1 S5B-PH-SM4 SM02(8.0)B-BHS-1 SM02(8.0)B-BHS-1 Symbol CN1 CN2 CN3 CN3 Terminal No. Function CN1-1 Input voltage Edc: 9.6 to 14.4V/12V[nom.] CN1-2 0V Brightness dimmer voltage CN1-3 Edc: 0 to 3.4V(Maximum brightness on 0V) CN1-4 Used in the internal circuits, do not connect. CN1-5 Remote voltage Edc 0V: off/5 to 7V:on Symbol Vin GND Vbr Terminal No. CN3-1 CN3-2 CN3-3 Function Output 2[High voltage] Irms — Output 2[Low voltage] 2 to 6mA (2V) Symbol VHIGH2 N.C. VLOW2 N.C. Vrmt CN2 Terminal No. CN2-1 CN2-2 CN2-3 Function Output 1[High voltage] Irms — Output 1[Low voltage] 2 to 6mA — (2V) Symbol VHIGH1 N.C. VLOW1 • Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. • All specifications are subject to change without notice. 002-01 / 20051130 / ea442_cxa0217.fm (2/2) CXA-0217 ELECTRICAL CHARACTERISTICS Unit Output current Irms mA Input current Idc Oscillation frequency Open circuit output voltage Erms A kHz V Symbol Iout1 Iout2 Iout1 Iout2 Iout1 Iout2 Iin FL Vopen Specification min. typ. 5.3 6 5.3 6 5.5 6 5.5 6 1.7 2 1.7 2 0.76 — 52 58 1400 1500 TYPICAL CONNECTIONS EXAMPLE OF VOLTAGE DIMMER CONTROL CN1-1 Vin 9.6 to 14.4V Vrmt∗1 5 to 7V CN1-5 Vbr 0 to 3.4V CN1-3 CN1-4 CN3-1 RL (CCFL) CN3-3 EXAMPLE OF POTENTIOMETER DIMMER CONTROL CN1-1 Vin 9.6 to 14.4V b Vbr 3.4V RL(kΩ) 76 to 114 76 to 114 95 95 250 250 76 to 114 95 Brightness Maximum Maximum Maximum Maximum Minimum Minimum ∞ RL (CCFL) 5 4 3 2 1 0 0 1 2 3 4 5 6 Brightness dimmer voltage Vbr(V) CN2-3 a SW∗2 CN1-5 10kΩ Vrmt∗1 5 to 7V CN2-1 CN1-2 Ta(°C) 0 to +70 0 to +70 0 to +70 0 to +70 0 to +70 0 to +70 0 to +70 0 to +70 0 to +70 6 RL (CCFL) CN2-3 b Vbr(V) 0 0 0 0 3.4 3.4 0 to 3.4 0 0 to 3.4 BRIGHTNESS DIMMER VOLTAGE- OUTPUT CURRENT CHARACTERISTICS CN2-1 CN1-2 a SW∗2 Condition Vin(V) 12±2.4 12±2.4 12±1.2 12±1.2 12±1.2 12±1.2 12±2.4 12±2.4 12±2.4 max. 6.7 6.7 6.5 6.5 2.4 2.4 1.3 64 2000 Output current Iout(mA) Item CN1-3 CN1-4 CN3-1 RL (CCFL) CN3-3 NO DIMMER CONTROL(BRIGHTNESS MAX.) Vin 9.6 to 14.4V CN1-1 Vrmt∗1 5 to 7V CN1-5 CN2-1 RL (CCFL) CN1-2 CN2-3 CN1-3 CN1-4 CN3-1 RL (CCFL) CN3-3 ∗1 Vrmt ∗2 (remote voltage) shall be ON after Vin is ON. SW a:on, b:off • All specifications are subject to change without notice. 002-01 / 20051130 / ea442_cxa0217.fm