(1/2) Conformity to RoHS Directive DC to DC Converters Distributed Power Supplies for Systems, Insulation Type CF Series CFP10W/CFR15W/CFT30W Types FEATURES • This is an insulated onboard type product delivering among the best efficiency in the industry. This product delivers an efficiency of 91% (30W products) owing to our unique synchronous rectification circuitry. • This is an SMD onboard type, offering the lowest height profiles in the industry. By optimizing mounting methods, we have been able to achieve a thickness of only 4.0mm (10W). • Wide operating temperature range from –40 to +85°C with natural air cooling (No derating). • Wide input voltage range (DC.36 to 75V) • Parallel operation is possible. • Remote ON-OFF function. • Various protective functions(output overvoltage protection, output overcurrent protection and output undervoltage protection) • Alarm signal output function. • It is lead-free compatible. • It is a product conforming to RoHS directive. PRODUCT IDENTIFICATION CFP 033 – 3R0 (1) (2) (3) (1) Series name (CFP: 10W, CFR: 15W, CFT: 30W type) (2) Rated output voltage (3) Rated output current PART NUMBERS AND RATINGS Output voltage (V) 5 3.3 2.5 1.8 1.5 10W Type Current(A) 2 3 3 3 Part No. CFP050-2R0 CFP033-3R0 CFP025-3R0 CFP018-3R0 15W Type Current(A) 3 4.5 4.5 4.5 5.2 Part No. CFR050-3R0 CFR033-4R5 CFR025-4R5 CFR018-4R5 CFR015-5R2 30W Type Current(A) Part No. 9 CFT033-09R0 SPECIFICATIONS AND STANDARDS Type CFP10W CFR15W CFT30W 36 to 60[Continuation]/ 36 to 60[Continuation]/ 36 to 60[Continuation]/ Input voltage Edc V 75[Transient 10ms] 75[Transient 10ms] 75[Transient 10ms] Output voltage Edc V 1.5, 1.8, 2.5, 3.3, 5, 5.2 1.5, 1.8, 2.5, 3.3, 5 3.3 W 10 15 30 Maximum output power∗1 Efficiency % 88typ.[3.3V output] 89typ.[3.3V output] 91typ.[3.3V output] Ripple noise Ep-p mV 50max. 50max. 50max. Start up time ms 50typ. 50typ. 50typ. Yes(Output voltage shut-down type) Overvoltage protection∗2 Yes(Output voltage shut-down type) Overcurrent protection∗2 Alarm output Yes Overheat protection No Remote ON-OFF Yes Remote sensing No Parallel operation Possible Output voltage external variable function No Safety standards UL60950, CSA C22.2 No.60950(C-UL) 4.3×31.2×37.3[H×W×L] 4.5×42.4×45[H×W×L] External dimensions mm 4.3×27.2×37.3[H×W×L] Weight g 8typ. 8typ. 17typ. Mounting method Mounted from the terminal side (soldered). ∗1 Please note that the maximum output voltage will vary depending on the output voltage. Provisions for derating due to the ambient temperature are not required(100% at +85°C). ∗2 Recovery can be achieved by re-applying input or by operating the on/off control on the remote (after an interval of about 1 sec.). • Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. • All specifications are subject to change without notice. 003-01 / 20051203 / ea399_cf.fm (2/2) COMMON SPECIFICATIONS Operating(°C) Storage(°C) Operating(%)RH Storage(%)RH Cooling conditions Vibration Shock Withstand voltage SHAPES AND DIMENSIONS 10W/CFP TYPE NC NC 1 2 3 4 5 Diameter of the attachment surface ø10min. NC 13 12 11 10 9 8 7 6 NC Part No. Lot No. Marking NC accumulated Pin direction 2.17±0.5 27.2±0.5 Part No. Lot No. Marking 2.17±0.5 NC 13 12 11 10 9 8 7 6 NC Errors are not accumulated NC 1 2 3 4 5 2.54±0.2 Pin direction 15W/CFR TYPE Diameter of the attachment surface ø10min. 31.2±0.5 Humidity range –40 to +85[Ambient temperature of the power supply] –40 to +85[Ambient temperature of the power supply] 20 to 85[Maximum wet-bulb temperature: 38°C, without dewing] 10 to 95[Maximum wet-bulb temperature: 38°C, without dewing] Natural cooling[0.2m/s] Number of vibration: 10 to 55Hz, Sweep time: 1s, All amplitude 1.52mmp-p, Vibration time: X, Y, Z directions, each 2h Acceleration 100G, Half sine wave, Pulse Duration: 6ms, each directions 3 times, total 18 times Input terminal to output terminal: DC.1.5kV[1min, cutout current 2mA] 4.17±0.5 4.17±0.5 2.54±0.2 Errors are not Temperature range 37.3±0.5 37.3±0.5 4.3max. (4.0typ.) 39.9±0.6 Coplanarity 0.1max. 4.3max. (4.0typ.) Coplanarity 0.1max. 39.9±0.6 Dimensions in mm TERMINAL FUNCTIONS 10W/15W TYPES 1 2 3 4 5 6 7 8 9 10 11 12 13 +Vout +Vout +Vout –Vout –Vout ALM RC PO NC +Vin +Vin –Vin –Vin DC output terminal(+) DC output terminal(+) DC output terminal(+) DC output terminal(–) DC output terminal(–) Alarm output terminal Remote ON-OFF terminal All startup or all off DC input terminal(+) DC input terminal(+) DC input terminal(–) DC input terminal(–) Dimensions in mm 30W/CFT TYPE 5 4 3 2 1 NC NC NC NC 45max. 5.08±0.2 8 7 6 Errors are not accumulated NC NC 11 10 9 5.08±0.2 NC NC 12 13 14 15 16 17 18 19 20 21 2.54±0.2 10.16±0.2 Diameter of the attachment surface ø10 Attachment surface has no unevenness Pin direction 42.4±0.5 Coplanarity 0.1max. 45.0±0.6 4.5max. (4.2typ.) (1.3) Dimensions in mm TERMINAL FUNCTIONS 30W TYPE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 ALM NC RC NC PO –Vin –Vin –Vin +Vin +Vin +Vin +Vout +Vout +Vout +Vout –Vout –Vout –Vout –Vout –Vout –Vout Alarm output terminal Remote ON-OFF terminal All startup or all off. DC input terminal(–) DC input terminal(–) DC input terminal(–) DC input terminal(+) DC input terminal(+) DC input terminal(+) DC output terminal(+) DC output terminal(+) DC output terminal(+) DC output terminal(+) DC output terminal(–) DC output terminal(–) DC output terminal(–) DC output terminal(–) DC output terminal(–) DC output terminal(–) • All specifications are subject to change without notice. 003-01 / 20051203 / ea399_cf.fm