UNISONIC TECHNOLOGIES CO., LTD LM358 LINEAR INTEGRATED CIRCUIT DUAL OPERATIONAL AMPLIFIER DESCRIPTION The UTC LM358 consists of two independent high gain, internally frequency compensated operational amplifier. It can be operated from a single power supply and also split power supplies. FEATURES *Internally frequency compensated for unity gain. *Wide power supply range 3V - 32V. *Input common-mode voltage range include ground. *Large DC voltage gain. *Pb-free plating product number: LM358L ORDERING INFORMATION Ordering Number Normal Lead Free Plating LM358-D08-T LM358L-D08-T LM358-G09-T LM358L-G09-T LM358-P08-R LM358L-P08-R LM358-P08-T LM358L-P08-T LM358-S08-R LM358L-S08-R LM358-S08-T LM358L-S08-T LM358-SM1-R LM358L-SM1-R LM358-SM1-T LM358L-SM1-T Package Packing DIP-8 SIP-9 TSSOP-8 TSSOP-8 SOP-8 SOP-8 MSOP-8 MSOP-8 Tube Tube Tape Reel Tube Tape Reel Tube Tape Reel Tube www.unisonic.com.tw Copyright © 2005 Unisonic Technologies Co., Ltd 1 of 7 QW-R105-001,H LM358 LINEAR INTEGRATED CIRCUIT PIN DESCRIPTION SOP-8/DIP-8/MSOP-8/TSSOP-8 SIP-9 1 VCC 2 3 4 5 OUT1 IN1(-) IN1(+) GND UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 6 7 8 IN2(+) IN2(-) OUT2 9 VCC 2 of 7 QW-R105-001,H LM358 LINEAR INTEGRATED CIRCUIT BLOCK DIAGRAM UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 7 QW-R105-001,H LM358 LINEAR INTEGRATED CIRCUIT ABSOLUTE MAXIMUM RATINGS PARAMETER Supply Voltage Differential Input Voltage Input Voltage Output Short to Ground SYMBOL VCC VI(DIFF) VI RATINGS ±16 or 32 UNIT V V V ±32 -0.3 ~ +32 Continuous SIP-9 600 DIP-8 500 PD Power Dissipation mW SOP-8 280 TSSOP-8/MSOP-8 200 Junction Temperature TJ +125 °C Operating Temperature TOPR 0 ~ +70 °C Storage Temperature TSTG -65 ~ +150 °C Note Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. ELECTRICAL CHARACTERISTICS (VCC=5.0V, VEE=GND, Ta=25℃, unless otherwise specified） PARAMETER SYMBOL Input Offset Voltage VI(OFF) Input Common Mode Voltage Differential Input Voltage VI(CM) VI(DIFF) Output Voltage Swing VOH VOL Large Signal Voltage Gain GV Power Supply Current ICC Input Offset Current Input Bias Current Short Circuit Current to Ground VCC=30V, RL=2KΩ VCC=30V, RL=10KΩ VCC=5V, RL≧10KΩ VCC=15V, RL≧2KΩ VO(P)=1V ~ 11V RL=∝, VCC=30V RL=∝, Full Temperature Range Output Current ISINK CMRR PSRR CS VI(+)=1V, VI(-)=0V VCC=15V, VO(P)=2V VI(+)=0V, VI(-)=1V VCC=15V, VO(P)=2V VI(+)=0V, VI(-)=1V VCC=15V, VO(P)=200mV f=1KHZ ~ 20KHZ UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP MAX UNIT 2.9 7.0 mV VCC-1.5 VCC V V V V mV 0 26 27 25 28 5 20 100 0.8 0.5 5 45 40 II(OFF) II(BIAS) ISC ISOURCE Common Mode Rejection Ratio Power Supply Rejection Ratio Channel Separation TEST CONDITIONS VCM=0V toVCC-1.5V VO(P)=1.4V, RS=0Ω VCC=30V V/mV 2.0 1.2 50 250 60 mA mA nA nA mA 10 30 mA 10 15 mA 12 100 mA 65 65 80 100 120 dB dB dB 4 of 7 QW-R105-001,H LM358 TYPICAL CHARACTERISTICS Fig.2 Input Current vs Temperature Fig.1 Input Voltage Range 100 15 80 Input Current (mA) Input Voltage Negative Input 10 Positive Input Vcc=+30V 60 Vcc=+15V 40 5 Vcc=+5V 20 0 0 10 Power Supply Voltage 0 5 -50 15 -25 0 25 75 100 Fig. 4 Voltage Gain vs Supply Voltage 160 40 Vcc RL=20k Ic 120 RL=2k (dB) 30 Voltage Gain æ Input Current (mA) 50 Temperature(°C) Fig.3 Input Current vs Supply Voltage 20 Ta= 0~+85°C 10 Ta= -20°C 0 10 80 40 0 0 20 30 0 40 7.5 15 22.5 30 Supply Voltage (V) Supply Voltage (V) Fig. 5 Open Loop Gain vs Frequency Fig. 6 Common Mode Rejection Ratio vs Frequency 120 Vcc 100 Common Mode Rejection Ratio (dB) (dB) 120 100M 0.1 F 80 Voltage Gain LINEAR INTEGRATED CIRCUIT Vin Vcc/2 60 40 Vcc=30V Vcc=15V 20 100 Vcc=+7.5V Vee=-7.5V 80 +7.5V 60 100k 100 40 100 Vin 20 100k -7.5V 0 0 10 0 10 1 10 2 10 3 10 4 105 10 6 10 7 Frequency (Hz) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 10 2 10 3 10 4 10 5 10 6 Frequency (Hz) 5 of 7 QW-R105-001,H LM358 LINEAR INTEGRATED CIRCUIT TYPICAL CHARACTERISTICS(Cont.) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 6 of 7 QW-R105-001,H LM358 LINEAR INTEGRATED CIRCUIT UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 7 of 7 QW-R105-001,H