UNISONIC TECHNOLOGIES CO., LTD RB751V40 DIODE SCHOTTKY DIODES - FEATURES * Miniature surface mounting type * Low forward voltage drop (VF=0.37V Typ. at 1mA) * Low reverse leakage current * Fast switching speed + SOD-323 *Pb-free plating product number: RB751V40L ORDERING INFORMATION Order Number Normal Lead Free Plating RB751V40-CB2-R RB751V40L-CB2-R Package Packing SOD-323 Tape Reel RB751V40L-CB2-R (1)Packing Type (2)Package Type (3)Lead Plating (1) R: Tape Reel (2) CB2: SOD-323 (3) L: Lead Free Plating, Blank: Pb/Sn MARKING 5E Lead Plating www.unisonic.com.tw Copyright © 2005 Unisonic Technologies Co., Ltd 1 of 3 QW-R601-022,A RB751V40 DIODE ABSOLUTE MAXIMUM RATINGS (Single Diode @TA=25℃) PARAMETER SYMBOL RATINGS UNIT Peak Reverse Voltage VRM 40 V Maximum Reverse Voltage (DC) VR 30 V Mean Rectifying Current IOUT 30 mA Non-repetitive Peak Forward Surge Current IFSM 200 mA +125 ℃ Junction Temperature TJ ℃ Storage Temperature TSTG -40 ~ +125 Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. ELECTRICAL CHARACTERISTICS (TA=25℃, unless otherwise specified) PARAMETER Forward Voltage Reverse Leakage Current Capacitance Between Terminals SYMBOL TEST CONDITIONS VF IF= 1mA IR VR=30V CT VR=1V, f=1MHz UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP 2 MAX 0.37 0.5 UNIT V µA pF 2 of 3 QW-R601-022,A RB751V40 DIODE TYPICAL CHARACTERISTICS Forward Characteristics Reverse Characteristics 1000m 100µ Ta = 125℃ Typ. pulse measurement 12 5℃ 10m Reverse Current, IR (A) 10µ = Ta = 75℃ Ta Forward Current, IF (A) 100m 1m Ta = 25℃ 100µ Ta = -25℃ Ta = 75℃ 1µ Ta = 25℃ 100n Ta = -25℃ 10n 10µ Typ. pulse measurement 1µ 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1n 0 5 10 15 20 25 30 35 Reverse Voltage, VR (V) Fonward Voltage, VF (V) Capacitance Between Terminals Characteristics Capacitance Between Terminals, CT (pF) 100 Ta = 25℃ f = 1MHz 50 20 10 5 2 1 0 2 4 6 8 10 12 Reverse Voltage, VR (V) UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R601-022,A