COILCRAFT ML433PZA

4020 POWER INDUCTORS
High Reliability Power Inductors ML433PZA
■ High temperature materials allow operation in ambient
temperatures up to 155°C
■ Exceptionally low DCR – 10.8 mOhm
■ Excellent current handling capability
Terminations Tin-silver over copper.
Core material Composite
Weight 162 – 169 mg
Ambient temperature –55°C to +105°C with Irms current, +105°C to
+155°C with derated current
Storage temperature Component: –55°C to +155°C.
Tape and reel packaging: –55°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Enhanced crush-resistant packaging 1000/7″reel; 3500/13″ reel
Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing,
2.3 mm pocket depth
Inductance2 DCR (mOhms)3
Part number1
±20% (µH)
typ
max
ML433PZA102MLZ 1.0
10.8011.90
ML433PZA152MLZ 1.5
14.4015.80
ML433PZA222MLZ 2.2
21.3523.50
ML433PZA332MLZ 3.3
34.8038.30
ML433PZA472MLZ 4.7
52.2057.40
Isat (A)5 Irms (A)6
SRF (MHz)4
min typ
10% drop 20% drop 30% drop
20°C rise 40°C rise
51 64
4.5
5.1
5.4
6.0
8.3
47 59
4.1
4.4
4.6
5.0
6.8
30 38
3.1
3.5
3.7
4.5
6.0
26 33
2.7
2.8
2.9
2.9
3.9
21 26
2.0
2.5
2.7
2.7
3.6
1. When ordering, please specify testing code:
0.157 ±0.012
4,0 ±0,3
XXX
ML433PZA472MLZ
Testing:Z=COTS
H=Screening per Coilcraft CP-SA-10001
N
=Screening per Coilcraft CP-SA-10004
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using an Agilent/HP 4395A or equivalent.
5. Typical dc current at which the inductance drops the specified amount
from its value without current.
6. Typical current that causes the specified temperature rise from 25°C
ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
0.157 ±0.012
4,0 ±0,3
Dash
number
0.083
max
2,10
0.032 ±0.002
0,82 ±0,05
Irms Testing
Irms testing was performed on a 0.060″ thick pcb with 4 oz. copper traces optimized to minimize additional temperature rise.
0.093
2,37
0.128 ±0.008
3,26 ±0,20
Temperature rise is highly dependent on many factors including
pcb land pattern, trace size, and proximity to other components.
Therefore temperature rise should be verified in application
conditions.
0.062 ±0.010
1,57 ±0,25
Dimensions are in
0.134
3,4
0.038
0,98
inches
mm
Document ML745-1 Revised 08/16/12
®
© Coilcraft, Inc. 2012
Recommended
Suggested
Land Pattern
Land
Pattern
1102 Silver Lake Road
Cary, IL 60013
Phone 800-981-0363
Fax 847-639-1508
Email [email protected]
www.coilcraft-cps.com
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specifications subject to change without notice.
Please check our web site for latest information.
4020 POWER INDUCTORS
ML433PZA Series
L vs Current
L vs Frequency
10
4.7 µH
Inductance (µH)
3.3 µH
2.2 µH
1.5 µH
1.0 µH
1
0.1
0.1
10
1.0
100
Frequency (MHz)
Irms Derating
50
120
45
110
100
35
30
25
4.7 µH
20
15
3.3 µH
2.2 µH
1.5 µH
1.0 µH
10
90
80
70
60
50
40
25°C
40
Percent of rated Irms
Equivalent Series Resistance (Ohms)
ESR vs Frequency
30
20
5
10
0
0.1
10
1
100
Frequency (MHz)
0
-55 -40
-20
0
20
60
80
100
120
140 160
Document ML745-2 Revised 08/16/12
®
© Coilcraft, Inc. 2012
40
Ambient temperature (°C)
1102 Silver Lake Road
Cary, IL 60013
Phone 800-981-0363
Fax 847-639-1508
Email [email protected]
www.coilcraft-cps.com
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specifications subject to change without notice.
Please check our web site for latest information.