COILCRAFT MS611PYA

1010 POWER INDUCTORS
High Reliability Power Inductors MS611PYA
■ High temperature materials allow operation in ambient
temperatures up to 155°C
■ Tin-lead (Sn-Pb) termination for the best possible board
adhesion
■ High current and very low DCR
■ Soft saturation makes them ideal for VRM/VRD applications.
Core material Composite
Terminations Tin-lead (63/37) over copper.
Weight 5.7 – 6.3 g
Ambient temperature –55°C to +105°C with Irms current, +105°C
to +155°C with derated current
Storage temperature Component: –55°C to +155°C.
Tape and reel packaging: –55°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Enhanced crush-resistant packaging 300/13″ reel Plastic tape: 24 mm wide, 0.4 mm thick, 16 mm pocket spacing,
10.21 mm pocket depth
Inductance2
Part number1
±20% (µH)
MS611PYA221MSZ
0.22
MS611PYA451MSZ
0.45
MS611PYA102MSZ
1.0
MS611PYA152MSZ
1.5
MS611PYA222MSZ
2.2
MS611PYA332MSZ
3.3
MS611PYA472MSZ
4.7
MS611PYA562MSZ
5.6
MS611PYA682MSZ
6.8
MS611PYA822MSZ
8.2
MS611PYA103MSZ
10
MS611PYA153MSZ
15
DCR (mOhms)3
typ max
0.330.37
0.600.66
1.001.10
1.601.76
2.552.80
3.704.10
5.205.70
6.306.93
8.108.90
11.7012.90
13.4014.75
16.9018.60
SRF (MHz)4
min typ
92 115
53 66
34 42
26 33
18 22
17 21
15 19
13 16
11 14
9 12
8 11
7
9
1. When ordering, please specify testing code:
MS611PYA682MSZ
Testing:Z=COTS
H=Screening per Coilcraft CP-SA-10001
N
=Screening per Coilcraft CP-SA-10004
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using an Agilent/HP 4395A or equivalent.
5. Typical dc current at which the inductance drops 30% from its value without current.
6. Typical current that causes the specified temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Irms Testing
Irms testing was performed on a
0.060″ thick pcb with 4 oz. copper
traces optimized to minimize
additional temperature rise.
Temperature rise is highly
dependent on many factors
including pcb land pattern,
trace size, and proximity to
other components. Therefore
temperature rise should be
verified in application conditions.
Document MS804-1 Revised 08/14/12
®
© Coilcraft, Inc. 2012
Irms (A)6
Isat (A)5
20°C rise 40°C rise
98.8
30.8 41.6
70.5
30.0 39.8
55.0
24.0 32.6
36.6
23.3 30.4
34.0
18.4 24.0
27.4
13.7 18.8
25.4
13.1 18.0
23.6
11.8 15.9
21.8
10.5 13.9
18.3
9.7 12.8
17.5
8.6 11.6
15.5
7.4 10.4
1102 Silver Lake Road
Cary, IL 60013
Phone 800-981-0363
Fax 847-639-1508
Email [email protected]
www.coilcraft-cps.com
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specifications subject to change without notice.
Please check our web site for latest information.
1010 POWER INDUCTORS
MS611PYA Series (1010)
Inductance (µH)
0.4
0.3
0.22 µH
0.2
0.1
0
0
10
20
30
40
50
60
70
Current (A)
80
90 100
Inductance (µH)
0.6
0.5
0.4
0.45 µH
0.3
0.2
0.1
0
0
10
20
30
40
50
60
Current (A)
70
80
90
Inductance (µH)
1.2
1.0
0.8
0.6
0.68 µH
0.4
0.2
0
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
0
10
20
30
40
Current (A)
50
60
70
80
Inductance (µH)
Inductance (µH)
Inductance (µH)
Inductance (µH)
Inductance (µH)
Typical L vs Current
1.0 µH
0
10
20
30
40
Current (A)
50
60
70
80
2.0
1.6
1.5 µH
1.2
0.8
0.4
0
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
0
10
20
40
50
60
40
50
60
2.2 µH
0
10
20
30
Current (A)
5
4
3
3.3 µH
2
1
0
0
5
10
15
20
25
30
35
40
45
50
30
35
40
45
50
Current (A)
6
5
4
4.7 µH
3
2
1
0
0
5
10
15
20
25
Current (A)
Document MS804-2 Revised 08/14/12
®
© Coilcraft, Inc. 2012
30
Current (A)
1102 Silver Lake Road
Cary, IL 60013
Phone 800-981-0363
Fax 847-639-1508
Email [email protected]
www.coilcraft-cps.com
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specifications subject to change without notice.
Please check our web site for latest information.
1010 POWER INDUCTORS
MS611PYA Series (1010)
Inductance (µH)
Inductance (µH)
10
8
6
5.6 µH
4
2
0
0
5
10
15
Current (A)
20
25
30
10
Inductance (µH)
Inductance (µH)
Inductance (µH)
Typical L vs Current
8
6.8 µH
6
4
2
0
0
5
10
15
Current (A)
20
25
30
16
12
8
10 µH
4
0
0
2
4
6
8
10
12
14
16
18
20
12
14
16
18
20
Current (A)
20
16
12
15 µH
8
4
0
0
2
4
6
8
10
Current (A)
12
10
8
8.2 µH
6
4
2
0
0
2
4
6
8
10
12
Current (A)
14
16
18
20
Document MS804-3 Revised 08/14/12
®
© Coilcraft, Inc. 2012
1102 Silver Lake Road
Cary, IL 60013
Phone 800-981-0363
Fax 847-639-1508
Email [email protected]
www.coilcraft-cps.com
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specifications subject to change without notice.
Please check our web site for latest information.
1010 POWER INDUCTORS
MS611PYA Series (1010)
Typical L vs Frequency
0.394 ±0.020
10,0 ±0,5
XXX
Inductance (µH)
100
15 µH
10 µH 6.8 µH
4.7 µH
10
0.445 ±0.020
11,3 ±0,5
2.2 µH
1.5 µH
Dash
number
1.0 µH
1
0.45 µH
0.394
max
10,0
0.22 µH
0.1
0.1
10
1
100
Frequency (MHz)
A
±0.008 in
Dash
±0,20 mm
number
(in / mm)
-221
0.406 / 10.31
-451
0.406 / 10.31
-681
0.406 / 10.31
-102
0.406 / 10.31
-152
0.390 / 9.91
-222
0.374 / 9.51
-332
0.358 / 9.11
-472
0.358 / 9.11
-562
0.358 / 9.11
-682
0.351 / 8.91
-822
0.343 / 8.71
-103
0.343 / 8.71
-153
0.343 / 8.71
0.087±0.004
2,20 ±0,10
B
(in / mm)
0.445 / 11.31
0.445 / 11.31
0.445 / 11.31
0.445 / 11.31
0.421 / 10.71
0.398 / 10.11
0.374 / 9.51
0.374 / 9.51
0.374 / 9.51
0.362 / 9.21
0.351 / 8.91
0.351 / 8.91
0.351 /8.91
0.262
6,65
Irms Derating
120
A
(see table)
110
B
(see table)
90
0.175 ±0.010
4,45 ±0,25
80
70
inches
Dimensions are in
mm
60
50
40
0.094
2,38
Suggested
Land Pattern
25°C
Percent of rated Irms
100
30
20
10
0
-55 -40
-20
0
20
40
60
80
100
120
140 160
Ambient temperature (°C)
Document MS804-4 Revised 08/14/12
®
© Coilcraft, Inc. 2012
1102 Silver Lake Road
Cary, IL 60013
Phone 800-981-0363
Fax 847-639-1508
Email [email protected]
www.coilcraft-cps.com
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specifications subject to change without notice.
Please check our web site for latest information.