6235 POWER INDUCTORS High-Reliability Power Inductors ML512PJB ■ High temperature materials allow operation in ambient temperatures up to 155°C. ■ Special construction allows it to pass vibration testing to 80 G and shock testing to 1000 G. Core material Ferrite Terminations Silver-palladium-platinum-glass frit Weight 460 – 480 mg Ambient temperature –55°C to +105°C with Irms current, +105°C to +155°C with derated current Storage temperature Component: –55°C to +155°C. Tape and reel packaging: –55°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Enhanced crush-resistant packaging 350/7″reel Plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 3.68 mm pocket depth Recommended pick and place nozzle OD: 6.2 mm; ID: ≤ 3.1 mm DCR3 Inductance2max Part number1 ±20% (µH) (Ohms) ML512PJB682MLZ 6.8 0.075 ML512PJB822MLZ 8.2 0.095 ML512PJB103MLZ 10.0 0.100 ML512PJB123MLZ 12.0 0.110 ML512PJB153MLZ 15.0 0.125 ML512PJB183MLZ 18.0 0.140 ML512PJB223MLZ 22.0 0.145 ML512PJB333MLZ 33.0 0.180 ML512PJB473MLZ 47.0 0.245 ML512PJB563MLZ 56.0 0.280 ML512PJB683MLZ 68.0 0.345 ML512PJB823MLZ 82.0 0.315 ML512PJB104MLZ 100.0 0.375 ML512PJB124MLZ 120.0 0.435 ML512PJB154MLZ 150.0 0.535 ML512PJB224MLZ 220.0 0.720 ML512PJB334MLZ 330.0 1.02 ML512PJB474MLZ 470.0 1.58 ML512PJB564MLZ 560.0 1.75 ML512PJB684MLZ 680.0 1.97 ML512PJB824MLZ 820.0 2.70 ML512PJB105MLZ 1000.0 3.20 ML512PJB155MLZ 1500.0 4.60 ML512PJB185MLZ 1800.0 5.42 ML512PJB225MLZ 2200.0 6.40 ML512PJB335MLZ 3300.0 8.90 ML512PJB475MLZ 4700.0 14.0 ML512PJB565MLZ 5600.0 16.4 ML512PJB685MLZ 6800.0 21.4 ML512PJB825MLZ 8200.0 24.0 ML512PJB106MLZ 10000.0 29.0 ® Isat (A)5 Irms (A)6 10% 20% 30% 20°C40°C min typ drop drop drop rise rise 39 55 2.6 2.7 2.8 1.01.5 34 48 2.5 2.6 2.7 1.01.5 26 37 2.3 2.4 2.5 1.01.4 20 29 1.9 2.2 2.3 1.01.4 18 25 1.9 2.0 2.0 0.971.4 17 24 1.7 1.8 1.9 0.961.3 17 24 1.6 1.7 1.7 0.881.3 11 16 1.3 1.4 1.5 0.801.0 9.0 13 1.1 1.2 1.2 0.640.92 8.4 12 1.0 1.0 1.1 0.600.86 7.610.8 0.90 0.940.960.580.80 7.010.0 0.46 0.520.550.580.76 6.3 9.0 0.46 0.52 0.54 0.560.72 5.8 8.3 0.44 0.48 0.51 0.480.64 5.1 7.3 0.37 0.43 0.45 0.420.58 4.0 5.6 0.31 0.36 0.37 0.360.51 3.0 4.4 0.26 0.29 0.30 0.320.44 2.5 3.6 0.22 0.25 0.26 0.290.40 2.2 3.1 0.20 0.22 0.23 0.260.37 2.0 2.8 0.17 0.19 0.21 0.220.32 1.8 2.5 0.16 0.18 0.19 0.210.26 1.5 2.2 0.14 0.17 0.18 0.190.24 1.3 1.9 0.12 0.13 0.14 0.150.21 1.2 1.7 0.11 0.12 0.13 0.140.18 1.0 1.5 0.0900.11 0.11 0.13 0.18 0.881.1 0.0800.090 0.100.110.14 0.66 0.94 0.070 0.077 0.084 0.0950.12 0.66 0.86 0.070 0.080 0.085 0.0800.10 0.56 0.80 0.070 0.075 0.080 0.0700.095 0.49 0.70 0.062 0.070 0.078 0.0650.090 0.43 0.61 0.059 0.067 0.074 0.0600.075 SRF 4 (MHz) ML512PJB106MLZ Testing:Z=COTS H=Screening per Coilcraft CPSA-10001 N =Screening per Coilcraft CPSA-10004 C =Custom screening (please specify when ordering) 2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4192A. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using an Agilent/HP 8753ES or equivalent. 5. Typical DC current that causes the specified inductance drop from its value without current. 6. Typical current that causes the specified temperature rise from 25°C ambient. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Specifications subject to change without notice. Please check our website for latest information. 1102 Silver Lake Road Cary IL 60013 © Coilcraft, Inc. 2011 1. When ordering, please specify testing code: Document ML587-1 Revised 12/06/10 Phone 800-981-0363 Fax 847-639-1508 E-mail [email protected] Web www.coilcraft-cps.com 6235 POWER INDUCTORS ML512PJB Series (6235) Typical L vs Current Typical L vs Frequency 10000 10000 3300 µH 1000 µH 330 µH 100 µH 100 33 µH 10 µH 10 1 0.01 1000 µH 1000 Inductance (µH) 1000 Inductance (µH) 3300 µH 0.1 330 µH 100 µH 100 33 µH 10 µH 10 1 Current (A) 10 1 0.01 1 0.1 10 Frequency (MHz) Typical Current Derating 0.236 ±0.003* 6,00 ±0,076 120 100 90 0.236 ±0.003* 6,00 ±0,076 80 70 60 0.138 ±0.004 3,5 ±0,10 50 40 Recommended Land Pattern 25°C Percent of rated current 110 30 20 0.079 2,00 Isat Irms 10 0 -55 -40 -20 0 20 40 60 80 100 120 140 160 0.165 4,20 0.039 typ 1,00 Ambient temperature (°C) 0.260 0.167 6,60 4,25 0.039 typ 1,00 are of the case not * Dimensions including the termination. For maximum overall dimensions including the termination, add 0.005 in / 0,13 mm. Dimensions are in ® © Coilcraft, Inc. 2011 0.071 1,80 0.079 2,00 0.167 4,25 0.260 6,60 inches mm Specifications subject to change without notice. Please check our website for latest information. 1102 Silver Lake Road Cary IL 60013 0.165 4,20 Document ML587-2 Revised 12/06/10 Phone 800-981-0363 Fax 847-639-1508 E-mail [email protected] Web www.coilcraft-cps.com