6225 POWER INDUCTORS High-Reliability Power Inductors ML486PJB ■ High temperature materials allow operation in ambient temperatures up to 155°C. ■ Special construction allows it to pass vibration testing to 80 G and shock testing to 1000 G. Core material Ferrite Terminations Silver-palladium-platinum-glass frit Weight 309 – 331 mg Ambient temperature –55°C to +105°C with Irms current, +105°C to +155°C with derated current Storage temperature Component: –55°C to +155°C. Packaging: –55°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Enhanced crush-resistant packaging 750/7″reel Plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 2.57 mm pocket depth Recommended pick and place nozzle OD: 6.2 mm; ID: ≤ 3.1 mm DCR3 Inductance2max Part number1 ±20% (µH) (Ohms) ML486PJB122MLZ 1.2 ML486PJB222MLZ 2.2 ML486PJB332MLZ 3.3 ML486PJB472MLZ 4.7 ML486PJB682MLZ 6.8 ML486PJB103MLZ 10 ML486PJB153MLZ 15 ML486PJB223MLZ 22 ML486PJB333MLZ 33 ML486PJB473MLZ 47 ML486PJB683MLZ 68 ML486PJB104MLZ 100 ML486PJB124MLZ 120 ML486PJB154MLZ 150 ML486PJB224MLZ 220 ML486PJB334MLZ 330 ML486PJB474MLZ 470 ML486PJB684MLZ 680 ML486PJB105MLZ 1000 ML486PJB155MLZ 1500 ML486PJB185MLZ 1800 ML486PJB225MLZ 2200 ML486PJB335MLZ 3300 ML486PJB475MLZ 4700 ML486PJB565MLZ 5600 ML486PJB685MLZ 6800 ML486PJB825MLZ 8200 ML486PJB106MLZ 10000 SRF 4 (MHz) min typ (A)5 Irms (A)6 10% 20% 30% 20°C40°C drop drop drop rise rise Isat 0.040 125 178 5.3 5.4 5.4 0.881.3 0.045 70 100 3.9 4.0 4.1 0.801.1 0.055 48 68 3.5 3.5 3.6 0.801.0 0.070 37 53 3.0 3.1 3.2 0.721.0 0.095 28 40 2.6 2.7 2.8 0.721.0 0.105 25 35 2.1 2.1 2.2 0.721.0 0.135 16 23 2.1 2.2 2.2 0.680.96 0.225 12 17 1.4 1.5 1.6 0.640.88 0.260 9.814 1.1 1.2 1.2 0.52 0.72 0.360 7.010 0.98 1.0 1.0 0.48 0.64 0.420 6.7 9.6 0.58 0.61 0.62 0.460.59 0.610 5.4 7.7 0.48 0.51 0.52 0.380.51 0.750 4.2 7.4 0.42 0.45 0.46 0.340.46 0.920 4.5 6.4 0.39 0.41 0.42 0.320.43 1.30 3.5 5.0 0.32 0.34 0.35 0.300.40 2.00 2.7 3.8 0.26 0.27 0.28 0.220.31 2.60 2.2 3.2 0.22 0.23 0.24 0.190.30 4.00 2.0 2.8 0.18 0.19 0.20 0.140.21 6.00 1.6 2.3 0.15 0.16 0.17 0.120.19 9.00 1.3 1.8 0.12 0.13 0.13 0.100.16 11.7 1.2 1.7 0.11 0.12 0.12 0.0900.11 13.5 0.9 1.3 0.10 0.10 0.11 0.0900.10 21.0 0.8 1.1 0.099 0.10 0.11 0.0650.090 30.0 0.6 0.90 0.086 0.096 0.10 0.0600.070 36.0 0.5 0.72 0.077 0.090 0.096 0.0550.070 43.0 0.5 0.70 0.080 0.086 0.089 0.0500.060 54.0 0.5 0.69 0.079 0.086 0.088 0.0500.060 70.0 0.5 0.68 0.050 0.050 0.060 0.0450.050 ® ML486PJB106MLZ Testing:Z=COTS H=Screening per Coilcraft CP‑SA-10001 N =Screening per Coilcraft CP‑SA-10004 2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4192A. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using an Agilent/HP 8753ES or equivalent. 5. Typical DC current that causes the specified inductance drop from its value without current. 6. Typical current that causes the specified temperature rise from 25°C ambient. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Specifications subject to change without notice. Please check our website for latest information. 1102 Silver Lake Road Cary IL 60013 © Coilcraft, Inc. 2011 1. When ordering, please specify testing code: Document ML554-1 Revised 03/28/11 Phone 800-981-0363 Fax 847-639-1508 E-mail [email protected] Web www.coilcraft-cps.com 6225 POWER INDUCTORS ML486PJB Series (6225) Typical L vs Current Typical L vs Frequency 10000 10000 3300 µH 1000 µH 330 µH 100 µH 100 33 µH 10 µH 10 1 0.01 1000 µH 1000 Inductance (µH) 1000 Inductance (µH) 3300 µH 0.1 1 Current (A) 10 330 µH 100 µH 100 33 µH 10 µH 10 1 0.01 1 0.1 10 Frequency (MHz) Current Derating 120 0.236 ±0.003 * 6,00 ±0,076 100 90 80 70 0.236 ±0.003* 6,00 ±0,076 60 50 40 0.098 ±0.004 2,50 ± 0,10 25°C Percent of rated current 110 30 20 Isat Irms 10 0 -55 -40 -20 Recommended Land Pattern 0.079 2,00 0 20 40 60 80 100 120 0.165 4,20 140 160 Ambient temperature (°C) 0.039 typ 1,00 0.260 0.167 6,60 4,25 0.039 typ 1,00 are of the case not * Dimensions including the termination. For maximum overall dimensions including the termination, add 0.005 in / 0,13 mm. Dimensions are in ® © Coilcraft, Inc. 2011 0.071 1,80 0.079 2,00 0.167 4,25 0.260 6,60 inches mm Specifications subject to change without notice. Please check our website for latest information. 1102 Silver Lake Road Cary IL 60013 0.165 4,20 Document ML554-2 Revised 03/28/11 Phone 800-981-0363 Fax 847-639-1508 E-mail [email protected] Web www.coilcraft-cps.com