1260 POWER INDUCTORS High Reliability Power Inductors ML590PNB ■ High current, low DCR shielded power inductors ■ High temperature materials allow operation in ambient temperatures up to 155°C Core material Ferrite Terminations Matte tin over nickel over phos bronze. Weight: 2.8 g – 3.3 g Ambient temperature –55°C to +105°C with Irms current, +105°C to +155°C with derated current Storage temperature Component: –55C to +155°C. Tape and reel packaging: –55°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Enhanced crush-resistant packaging 500/13″ reel; Plastic tape: 24 mm wide, 0.35 mm thick, 16 mm pocket spacing, 6.6 mm pocket depth DCR3 (mOhms) 2 Inductance Part number1 (µH) typ max ML590PNB102NLZ 1.0 ±30% 5.8 6.5 ML590PNB152NLZ 1.5 ±30% 8.8 9.8 ML590PNB222NLZ 2.2 ±30% 11.5 12.8 ML590PNB332NLZ 3.3 ±30% 12.6 14.0 ML590PNB472MLZ 4.7 ±20% 13.9 15.5 ML590PNB562MLZ 5.6 ±20% 14.9 16.6 ML590PNB682MLZ 6.8 ±20% 16.6 18.5 ML590PNB822MLZ 8.2 ±20% 20.2 22.5 ML590PNB103MLZ 10 ±20% 21.5 23.9 ML590PNB123MLZ 12 ±20% 24.5 27.3 ML590PNB153MLZ 15 ±20% 30.7 34.2 ML590PNB183MLZ 18 ±20% 35.4 39.4 ML590PNB223MLZ 22 ±20% 36.6 40.7 ML590PNB273MLZ 27 ±20% 51.3 57.0 ML590PNB333MLZ 33 ±20% 54.9 61.0 ML590PNB393MLZ 39 ±20% 58.0 64.5 ML590PNB473MLZ 47 ±20% 80.1 89.0 ML590PNB563MLZ 56 ±20% 82.5 91.7 ML590PNB683MLZ 68 ±20% 94.5 105.0 ML590PNB823MLZ 82 ±20% 131.6 146.3 ML590PNB104MLZ 100 ±20% 141.8 157.6 ML590PNB124KLZ 120 ±10% 193.3 214.8 ML590PNB154KLZ 150 ±10% 215.4 239.4 ML590PNB184KLZ 180 ±10% 254.2 282.5 ML590PNB224KLZ 220 ±10% 314.1 349.0 ML590PNB274KLZ 270 ±10% 368.8 409.8 ML590PNB334KLZ 330 ±10% 481.3 534.8 ML590PNB394KLZ 390 ±10% 517.5 575.0 ML590PNB474KLZ 470 ±10% 721.2 801.4 ML590PNB564KLZ 560 ±10% 773.1 859.0 ML590PNB684KLZ 680 ±10% 867.6 964.0 ML590PNB824KLZ 820 ±10% 1158 1287 ML590PNB105KLZ 1000 ±10% 1273 1415 ® SRF 4 (MHz) min typ 70 100 56 80.0 39 55.0 29 42.0 27 38.0 21 30.0 19.0 27.0 18.0 26.0 15.0 22.0 14.0 20.0 12.6 18.0 11.2 16.0 10.5 15.0 9.0 13.0 8.7 12.4 8.4 12.0 8.0 11.6 7.3 10.5 7.0 10.0 6.0 8.6 5.5 7.8 4.8 6.8 4.5 6.4 4.3 6.1 3.9 5.5 3.0 4.3 2.8 4.0 2.5 3.6 2.1 3.0 2.0 2.8 1.8 2.6 1.7 2.5 1.6 2.4 (A)5 Irms (A)6 10% 20% 30% 20°C40°C dropdropdropriserise 19.1221.1822.76 6.00 8.00 14.4416.4017.64 5.30 7.60 12.3214.0015.08 5.20 7.30 10.8812.2213.12 5.00 7.00 9.9211.1012.00 4.50 7.00 8.54 9.6010.38 4.00 6.40 7.80 8.80 9.44 3.80 5.90 6.44 7.38 7.98 3.40 4.80 6.00 6.92 7.48 3.00 4.00 5.68 6.56 7.08 2.80 3.70 5.34 6.04 6.54 2.60 3.50 4.82 5.54 6.00 2.50 3.30 4.42 5.04 5.44 2.30 3.10 3.78 4.32 4.68 2.10 2.90 3.50 4.00 4.34 2.00 2.70 3.32 3.80 4.14 1.90 2.60 2.84 3.26 3.54 1.85 2.50 2.64 3.04 3.28 1.75 2.40 2.46 2.82 3.04 1.70 2.30 2.24 2.54 2.74 1.60 2.20 2.06 2.34 2.54 1.50 2.10 1.84 2.08 2.28 1.38 1.85 1.64 1.90 2.06 1.20 1.66 1.46 1.70 1.84 1.14 1.58 1.30 1.48 1.60 1.00 1.42 1.18 1.38 1.48 0.90 1.45 1.04 1.20 1.30 0.84 1.16 1.00 1.16 1.28 0.78 1.08 0.906 1.00 1.10 0.70 0.96 0.872 0.980 1.02 0.64 0.88 0.782 0.886 0.956 0.58 0.80 0.692 0.784 0.854 0.53 0.73 0.588 0.672 0.726 0.48 0.68 Isat ML590PNB824KLZ Testing:Z=COTS H=Screening per Coilcraft CP‑SA‑10001 N =Screening per Coilcraft CP‑SA‑10004 2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP 4263B LCR meter or equivalent. 3. DCR measured on a micro-ohmmeter and a Coilcraft CCF858 test fixture. 4. SRF measured using an Agilent/HP 8753D network analyzer. 5. DC current at which the inductance drops the specified amount from its value without current. 6. Current that causes the specified temperature rise from 25°C ambient. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Specifications subject to change without notice. Please check our website for latest information. Document ML599-1 Revised 09/19/2011 1102 Silver Lake Road Cary IL 60013 © Coilcraft, Inc. 2011 1. When ordering, please specify testing code: Phone 800-981-0363 Fax 847-639-1508 E-mail [email protected] Web www.coilcraft-cps.com 1260 POWER INDUCTORS ML590PNB Series Typical L vs Frequency Typical L vs Current 10000 10000 1000 µH 100 µH 100 10 µH 10 1 µH 1 0.1 0.01 1000 µH 1000 Inductance (µH) Inductance (µH) 1000 100 µH 100 10 µH 10 1 µH 1 1 0.1 10 0.1 0.1 10 1 Frequency (MHz) 100 Current (A) Current Derating 120 100 90 80 70 60 50 40 25°C Percent of rated Current 110 30 20 10 0 -55 -40 Isat Irms -20 0 20 40 60 80 100 120 140 160 Ambient temperature (°C) Dimensions are in ® Specifications subject to change without notice. Please check our website for latest information. 1102 Silver Lake Road Cary IL 60013 © Coilcraft, Inc. 2011 inches mm Document ML599-2 Revised 09/19/11 Phone 800-981-0363 Fax 847-639-1508 E-mail [email protected] Web www.coilcraft-cps.com