Document 804-1 RE U T A R E P M E T HIGH Shielded Power Inductors – XAL1010 • High current – up to 98.8 A • Very low DCR –0.33 mOhms • Soft saturation makes them ideal for VRM/VRD applications. Core material Composite Core and winding loss See www.coilcraft.com/coreloss Environmental RoHS compliant, halogen free Terminations RoHS compliant tin-silver (96.5/3.5) over copper. Other terminations available at additional cost. Weight 5.7 – 6.3 g Ambient temperature –40°C to +125°C with Irms current, +125°C to +165°C with derated current. Storage temperature Component: –40°C to +165°C. Tape & reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 300/13″ reel Plastic tape: 24 mm wide, 0.4 mm thick, 16 mm pocket spacing, 10.21 mm pocket depth PCB washing Only pure water or alcohol recommended DCR (mOhms)3 SRF typ4 Irms (A)6 Inductance2 Isat5 Part number1 ±20% (µH) typ max (MHz) (A) 20°C rise 40°C rise XAL1010-221ME_ 0.22 0.450.50 115 98.8 41.0 55.5 XAL1010-451ME_ 0.45 0.650.72 66 70.5 40.0 53.0 XAL1010-681ME_ 0.68 0.870.96 53 62.0 36.0 48.0 XAL1010-102ME_ 1.0 1.001.10 42 55.0 32.0 43.5 XAL1010-152ME_ 1.5 1.601.76 33 36.6 31.0 40.5 XAL1010-222ME_ 2.2 2.552.80 22 34.0 24.5 32.0 XAL1010-332ME_ 3.3 3.704.10 21 27.4 18.2 25.0 XAL1010-472ME_ 4.7 5.205.70 19 25.4 17.5 24.0 XAL1010-562ME_ 5.6 6.306.93 16 23.6 15.7 21.2 XAL1010-682ME_ 6.8 8.108.90 14 21.8 14.0 18.5 XAL1010-822ME_ 8.2 11.7012.90 12 18.3 12.9 17.1 XAL1010-103ME_ 10 13.4014.75 11 17.5 11.5 15.5 XAL1010-153ME_ 15 16.9018.60 9 15.5 9.9 13.8 Irms Testing Irms testing was performed on 0.75 inch wide × 0.25 inch thick copper traces in still air. Temperature rise is highly dependent on many factors including pcb land pattern, trace size, and proximity to other components. Therefore temperature rise should be verified in application conditions. 1. When ordering, please specify termination and packaging coded: XAL1010-153MED Termination:E=RoHS compliant tin-silver over copper. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging:D =13″ machine-ready reel. EIA-481 embossed plastic tape (300 parts per full reel). B=Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter D instead. 2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using Agilent/HP 4395A or equivalent. 5. DC current at which the inductance drops 30% (typ) from its value without current. 6. Current that causes the specified temperature rise from 25°C ambient. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 804-1 Revised 01/08/13 © Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 804-2 URE T A R E P M E T HIGH Shielded Power Inductors – XAL1010 Inductance (µH) 0.4 0.3 0.22 µH 0.2 0.1 0 0 10 20 30 40 50 60 Current (A) 70 80 90 100 Inductance (µH) 0.6 0.5 0.4 0.45 µH 0.3 0.2 0.1 0 0 10 20 30 40 50 60 Current (A) 70 80 90 Inductance (µH) 1.2 1.0 0.8 0.6 0.68 µH 0.4 0.2 0 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0 10 20 30 40 Current (A) 50 60 70 80 Inductance (µH) Inductance (µH) Inductance (µH) Inductance (µH) Inductance (µH) Typical L vs Current 1.0 µH 0 10 20 30 40 Current (A) 50 60 70 80 2.0 1.6 1.5 µH 1.2 0.8 0.4 0 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 0 10 20 30 Current (A) 40 50 60 40 50 60 2.2 µH 0 10 20 30 Current (A) 5 4 3 3.3 µH 2 1 0 0 5 10 15 20 25 30 35 40 45 50 30 35 40 45 50 Current (A) 6 5 4 4.7 µH 3 2 1 0 0 5 10 US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] 15 20 25 Current (A) Document 804-2 Revised 01/08/13 © Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 804-3 URE T A R E P M E T HIGH Shielded Power Inductors – XAL1010 Inductance (µH) Inductance (µH) 10 8 6 5.6 µH 4 2 0 0 5 10 15 Current (A) 20 25 30 10 Inductance (µH) Inductance (µH) Inductance (µH) Typical L vs Current 8 6.8 µH 6 4 2 0 0 5 10 15 Current (A) 20 25 30 16 12 8 10 µH 4 0 0 2 4 6 8 10 12 14 16 18 20 12 14 16 18 20 Current (A) 20 16 12 15 µH 8 4 0 0 2 4 6 8 10 Current (A) 12 10 8 8.2 µH 6 4 2 0 0 2 4 6 8 10 12 Current (A) 14 16 18 20 US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 804-3 Revised 01/08/13 © Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 804-4 URE T A R E P M E T HIGH Shielded Power Inductors – XAL1010 Typical L vs Frequency 0.394 ±0.020 10,0 ±0,5 XXX Inductance (µH) 100 15 µH 10 µH 6.8 µH 4.7 µH 10 0.445 ±0.020 11,3 ±0,5 2.2 µH Dash number 1.5 µH 1.0 µH 0.68 µH 1 0.45 µH 0.344 typ 8,74 0.22 µH 0.1 0.394 max 10,0 0.1 10 1 100 A ±0.016 in Dash ±0,40 mm number (in / mm) -221 0.394 / 10 -451 0.394 / 10 -681 0.394 / 10 -102 0.394 / 10 -152 0.386 / 9.8 -222 0.370 / 9.4 -332 0.354 / 9.0 -472 0.354 / 9.0 -562 0.354 / 9.0 -682 0.346 / 8.8 -822 0.335 / 8.5 -103 0.335 / 8.5 -153 0.335 / 8.5 Frequency (MHz) B (in / mm) 0.445 / 11.31 0.445 / 11.31 0.445 / 11.31 0.445 / 11.31 0.421 / 10.71 0.398 / 10.11 0.374 / 9.51 0.374 / 9.51 0.374 / 9.51 0.362 / 9.21 0.351 / 8.91 0.351 / 8.91 0.351 / 8.91 Recommended Land Pattern 0.087±0.004 2,20 ±0,10 Irms Derating 0.262 6,65 120 110 A (see table) B (see table) 90 80 70 0.175 ±0.010 4,45 ±0,25 60 50 Dimensions are in 40 0.094 2,38 inches mm 25°C Percent of rated Irms 100 30 20 10 0 -40 -20 0 20 40 60 80 100 120 140 160 180 Ambient temperature (°C) US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 804-4 Revised 01/08/13 © Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information.