COILCRAFT XAL1060

Document 812-1
RE
U
T
A
R
E
P
M
E
T
HIGH
Shielded Power Inductors – XAL1060
• Excellent current handling – over 100 A
• Very low DCR – as low as 0.5 mOhm
• Soft saturation
Designer’s Kit C435 contains 3 of each XAL1060 and XAL1010 value
Core material Composite
Environmental RoHS compliant, halogen free
Terminations RoHS compliant tin-silver (96.5/3.5) over copper.
Other terminations available at additional cost.
Weight 3.6 – 3.8 g
Ambient temperature –40°C to +125°C with Irms current, +125°C
to +165°C with derated current.
Storage temperature Component: –40°C to +165°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 150/7″reel; 600/13″ reel Plastic tape: 24 mm wide,
0.3 mm thick, 16 mm pocket spacing, 6.3 mm pocket depth
PCB washing Only pure water or alcohol recommended
DCR (mOhms)3 SRF typ4 Irms (A)6
Inductance2 Isat5
Part number1
±20% (µH)
typ max
(MHz)
(A)
20°C rise 40°C rise
XAL1060-181ME_0.18 0.500.55 68 >100 28.8 46.0
XAL1060-401ME_0.40 0.800.88 60
82 25.9 36.8
XAL1060-681ME_0.68 1.351.50 51
52 22.4 33.9
XAL1060-122ME_1.2
2.502.75 44
43 17.9 26.3
XAL1060-152ME_1.5
3.003.30 36
36 16.0 24.4
XAL1060-222ME_2.2
4.504.95 25
32 13.9 20.0
XAL1060-332ME_3.3
7.207.92 19
26 11.2 16.8
XAL1060-472ME_ 4.7
9.7510.72 16
25
8.5 14.0
1. When ordering, please specify packaging code:
Irms Testing
Irms testing was performed on
0.75 inch wide × 0.25 inch thick
copper traces in still air.
Temperature rise is highly
dependent on many factors
including pcb land pattern, trace
size, and proximity to other
components. Therefore temperature rise should be verified in
application conditions.
XAL1060-152MEC
Packaging:C=7″ machine-ready reel. EIA-481 embossed plastic tape (150 parts per full reel).
B=Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use code letter C instead.
D
=13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked
(750 parts per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. DC current at which the inductance drops 30% (typ) from its value without current.
6. Current that causes the specified temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 812-1 Revised 07/25/12
© Coilcraft Inc. 2012
This product may not be used in medical of high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check out web site for latest information.
Document 812-2
URE
T
A
R
E
P
M
E
T
HIGH
Shielded Power Inductors – XAL1060
Inductance (µH)
0.30
0.25
0.20
0.18 µH
0.15
0.10
0.05
0
0
10
20
30
40
50
60
Current (A)
70
80
90 100
Inductance (µH)
0.6
0.5
0.4
0.40 µH
0.3
0.2
0.1
0
0
10
20
30
40
50
60
Current (A)
70
80
90 100
Inductance (µH)
1.0
0.8
0.68 µH
0.6
0.4
0.2
0
0
5
10
15
20
25
30
35
Current (A)
40
45
50
55
60
2.0
Inductance (µH)
Inductance (µH)
Inductance (µH)
Inductance (µH)
Inductance (µH)
L vs Current
1.6
1.2 µH
1.2
0.8
0.4
0
0
4
8
12
16
20
24
28
32
Current (A)
36
40
44
48 52
2.4
2.0
1.6
1.5 µH
1.2
0.8
0.4
0
0
4
8
12
16
20
24
28
Current (A)
32
36
40
44 48
4
3
2.2 µH
2
1
0
0
4
8
12
16
20
24
Current (A)
28
32
36
40
44
5
4
3.2 µH
3
2
1
0
8
7
6
5
4
3
2
1
0
0 2
4
6
8 10 12 14 16 18 20 22 24 26 28 30 32 34 36
Current (A)
4.7 µH
0
2
4
6
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
8
10 12 14 16 18 20 22 24 26 28 30
Current (A)
Document 812-2 Revised 07/25/12
© Coilcraft Inc. 2012
This product may not be used in medical of high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check out web site for latest information.
Document 812-3
URE
T
A
R
E
P
M
E
T
HIGH
Shielded Power Inductors – XAL1060
L vs Frequency
0.394 ±0.020
10,0 ±0,5
10
XXX
4.7 µH
Inductance (µH)
3.3 µH
2.2 µH
1.5 µH
1.2 µH
0.68 µH
1
Dash
number
0.40 µH
0.236
max
6,0
0.18 µH
0.1
0.1
10
1
100
Frequency (MHz)
ESR vs Frequency
A
±0.008 in
Dash
±0,20 mm
number
(in / mm)
-181
0.406 / 10.31
-401
0.390 / 9.91
-681
0.374 / 9.50
-122
0.358 / 9.10
-152
0.358 / 9.10
-222
0.351 / 8.91
-332
0.343 / 8.71
-472
0.343 / 8.71
B
(in / mm)
0.445 / 11.31
0.421 / 10.70
0.398 / 10.11
0.374 / 9.50
0.374 / 9.50
0.362 / 9.21
0.351 / 8.91
0.351 / 8.91
0.262
6,65
0.087 ±0.004
2,20 ±0,10
A
(see table)
50
B
(see table)
45
40
35
30
0.175 ±0.010
4,45 ±0,25
0.40 µH
0.18 µH
4.7 µH
3.3 µH
2.2 µH
1.5 µH
1.2 µH
0.68 µH
Equivalent Series Resistance (Ohms)
0.445 ±0.020
11,3 ±0,5
inches
Dimensions are in
mm
25
0.094
2,39
Recommended
Land Pattern
20
15
10
5
0
0.1
10
1
100
Frequency (MHz)
Irms Derating
120
110
90
80
70
60
50
40
25°C
Percent of rated Irms
100
30
20
10
0
-40 -20
0
20
40
60
80
100
120
140
160 180
Ambient temperature (°C)
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 812-3 Revised 07/25/12
© Coilcraft Inc. 2012
This product may not be used in medical of high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check out web site for latest information.