DR Series Rotary DIP Switches, Unsealed, Through Hole, Straight and Right-Angle A FEATURES: • High pressure contacts (140K PSI) provide 20,000 Steps. • 10 And 16 position versions with both real and complement codes. • Terminals insert molded into base. Note: Common terminals connected internally. MATERIAL SPECIFICATIONS: ENVIRONMENTAL SPECIFICATIONS: Contacts ..................................Gold flashed copper alloy Terminals ................................Tin Lead Plated Base, Rotor, Case ....................Polyester Operating Temperature............-22ºF to +185ºF (-30°C to +85°C) Storage Temperature................-49ºF to +212ºF (-45°C to + 100°C) Vibration Resistance................Subjected to vibration of 10-55hz per second with a total amplitude of .06 in. in 3 mutually perpendicular directions for 2 hours each Shock Resistance ....................Will withstand 50G acceleration in 3 different planes for a period of 11 milliseconds Salt Spray Test ........................Withstands an atmosphere of 5% salt water at temperature of 50°C Hydrogen Sulfide Test ............Withstands an atmosphere of 15-20 PPM hydrogen sulfide gas at temperature of 40°C for 240 hours Atmosphere Test......................Withstands an atmosphere of 30-50 PPM sulfide gas at a temperature of 40°C for 240 hours Solder Heat Resistance ............Withstands 5 sec. flow solder bath of 260°C when mounted on a .06” thick PC board per MIL-STD 202, Method 210 TYPICAL PERFORMANCE CHARACTERISTICS: Contact Rating ........................0.4 VA @ 20 VDC Initial Contact Resistance ........50 Milliohms max. @ 2 VDC Insulation Resistance ..............1,000 Megohms min. @ 100 VDC Dielectric Strength ..................300 VAC RMS @ sea level Example: DRW 10RA = Rotary Dip with Wheel actuator BDC -10 position Right angle PC terminations DR Series • Unique design utilizes high pressure pin-point sliding contacts to penetrate contaminants on contact surface. • Screwdriver, knob and shaft (plastic and steel) type actuators available in both upright and right angle versions. D R HOW TO ORDER Series Rotary Dips (blue case) Actuator Style *D = Flush *M = Mini plastic shaft *W = Wheel *S = Metal shaft Circuit Type 10 = BCD 10C = BCD complement 16 = Hexadecimal 16C = Hexadecimal complement Terminations Blank = PC RA = Right angle for DRM, DRW, DRS only RAE = Right angle, Auto Assembly Compatible for DRD type only *DRD Available in RAE version only. For PC or SMT versions, see Pg. A24 DRD "E" Process Sealed Product. A25 Catalog 1308390 Issued 9-04 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in parentheses or brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 DR Series Rotary DIP Switches, Unsealed, Through Hole, Straight and Right-Angle A FOOTPRINTS DR Series .031 (0.80) DIA. TYP. .200 (5.08) .100 (2.54) .100 (2.54) .031 (0.80) TYP. .150 (3.81) TYP. .300 (7.60) .300 (7.60) .300 (7.60) .031 (0.80) TYP. .200 (5.08) .031 (0.80) DIA. TYP. .150 (3.81) TYP. .500 (12.70) .500 (12.7) TYP. .100 (2.54) TYP. .100 (2.54) TYP. PC S STYLE VERTICAL (METAL SHAFT) TRUTH TABLES Terminal Identification (view from bottom of the switch) 8 1 8 1 C C C C 2 4 2 4 10-Position, BCD (red actuator) Pos. C 1 2 4 8 0 X 1 X X 2 X X 3 X X X 5 X X X X 6 X X X 7 X X X X 8 X 9 X X X X 0 1 2 3 4 5 6 7 8 9 C 1 2 4 8 X X X X X X X X X X X X X X X X X X X X X X X X X X X X Pos. C 1 2 4 8 0 X 1 X X 2 X X 3 X X X 4 X 5 X X X X 6 X X X 7 X X X X 8 X 9 X X A X X X B X X X X X X 9 X A X X B X X X C X D X X X X X X C X X X D X E X X X X F X X X X X 16-Position Hexadecimal Complement (white actuator) Pos. X ACTUATOR LOCATION 16-Position, Hexadecimal (black actuator) 4 X 10-Position, BCD Complement (orange actuator) X X X PC RIGHT ANGLE S STYLE RA (METAL SHAFT) X X X Pos. C 1 2 4 8 0 X X X X X 1 X X X X 2 X X 3 X X X X X 4 X X X X 5 X 6 X X 7 X X X X 8 X X X X X X E X X F X X X A26 Catalog 1308390 Issued 9-04 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in parentheses or brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 DR Series Rotary DIP Switches, Unsealed, Through Hole, Metal Shaft or Wheel Actuator A “S” METAL SHAFT ACTUATOR .394 (10.00) .598 (15.20) DR Series .236 (6.00) .748 (19.00) .106 (2.70) .126 (3.20) .100 (2.54) .516 (13.10) .500 (12.70) .100 (2.54) 1/4-40 .213 (5.40) .300 (7.60) .748 (19.00) .516 (13.10) .689 (17.50) .236 (6.00) .126 (3.20) .394 (10.00) .039 (1.00) 1/4-40 .020 (0.50) .150 (3.81) .146 (3.70) .150 (3.81) .100 .100 (2.54) (2.54) .300 (7.60) 8 7 3 2 10 9 See Section K for knob selection “W” WHEEL ACTUATOR .394 (10.00) .394 (10.00) .200 (5.08) .130 (3.30) .394 (10.00) .020 (0.50) .236 (6.00) 6 5 4 .146 (3.70) .100 (2.54) .100 (2.54) .300 (7.60) .010 (0.25) .024 (0.60) .130 (3.30) .472 (13.00) .394 (10.00) 8 7 5 4 10 9 6 .394 (10.00) .394 (10.00) 3 2 .100 (2.54) .100 (2.54) .020 (0.50) TYP. .146 (3.70) .200 .205 (5.20) (5.08) TYP. A27 Catalog 1308390 Issued 9-04 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in parentheses or brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 DR Series Rotary DIP Switches, Unsealed, Through-Hole, Flush and Mini Shaft Actuator A “D” FLUSH ACTUATOR DR Series .394 (10.00) .000/.012 (.000/0.30) .472 (12.00) 4 0 1 2 3 9 5 6 .394 (10.00) .157 (4.00) 7 8 .146 (3.70) .020 (0.50) .100 (2.54) .205 (5.20) .100 (2.54) .200 (5.08) DIM. A B DR .236 (6.00) .146 (3.70) RC, *RA, RR .256 (6.50) .126 (3.20) DIM. A B DR .236 (6.00) .146 (3.70) RR .256 (6.50) .126 (3.20) “M” MINI-SHAFT ACTUATOR .157 (4.00) .394 (10.00) 0 1 2 3 7 8 9 .287 (7.30) .394 (10.00) .020 (0.50) A 4 5 6 B .300 (7.60) .100 (2.54) .100 (2.54) .394 (10.00) .287 (7.30) .472 (12.00) 4 0 1 2 3 9 5 6 .394 .157 (10.00) (4.00) 7 8 .100 (2.54) .146 (3.70) .020 (0.50) .100 (2.54) .205 (5.20) .200 (5.00) A28 Catalog 1308390 Issued 9-04 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in parentheses or brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967