PRODUCT SPECIFICATION 1.0 SCOPE This Product Specification covers Type N connectors (Plug and Jack, 50 and 75 Ohm). In the event of a discrepancy between this product specification and a specific sales drawing the sales drawing always takes precedence. 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME Type N 3.0 APPLICABLE DOCUMENTS AND SPECIFICATIONS 3.1 N/A 4.0 RATINGS 4.1 VOLTAGE 1000 Vrms 4.2 TEMPERATURE Rating: - 55°C TO + 165°C 4.3 FREQUENCY RATING DC to 11 GHz (50 Ohm) DC to 6 GHz (75 Ohm) 4.4 NOMINAL IMPEDANCE 50 or 75 Ohms per sales drawing REVISION: A ECR/ECN INFORMATION: TITLE: N PLUG, JACK 50 AND 75 OHM EC No: URF2009-0672 SHEET No. 1 of 3 DATE: 2009 / 05 / 12 DOCUMENT NUMBER: PS-89675-322 CREATED / REVISED BY: CHECKED BY: APPROVED BY: JDW SSS JDW TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC PRODUCT SPECIFICATION 5.0 PERFORMANCE 5.1 ELECTRICAL REQUIREMENTS ITEM DESCRIPTION TEST CONDITION REQUIREMENT 1 Insulation Resistance MIL-PRF-39012, paragraph 3.11 5000 Megohms Min. 2 Dielectric Withstanding Voltage MIL-PRF-39012, paragraph 3.17 1500 Vrms 3 RF High Potential Withstanding 4 Contact Resistance 5 Voltage Standing Wave Ratio MIL-PRF-39012, paragraph 3.14 6 RF Leakage MIL-PRF-39012, paragraph 3.26 7 RF Insertion Loss MIL-PRF-39012, paragraph 3.23 1500 Vrms @ 5 MHz MIL-PRF-39012, paragraph 3.16 Center Contact Outer Contact 1.50 Milliohms Max 0.20 Milliohms Max 1.15 TYP > 128 dB up to 1 GHz MIL-PRF-39012, paragraph 3.27 < .05 + .04 X √f (GHz) dB 5.2 MECHANICAL REQUIREMENTS ITEM DESCRIPTION 8 Material 9 REQUIREMENT MIL-PRF-39012, paragraph 3.3 See Sales Drawing Finish MIL-PRF-39012, paragraph 3.3.1 See Sales Drawing 10 Design MIL-PRF-39012, paragraph 3.4 See Sales Drawing 11 Recommended Mating Torque 12 Force to Engage MIL-PRF-39012, paragraph 3.5, Axial Force N/A 13 Force to Disengage MIL-PRF-39012, paragraph 3.5, Axial Force N/A 14 Coupling Proof Torque MIL-PRF-39012, paragraph 3.6 15 in-lbs REVISION: A TEST CONDITION 6 in-lbs Maximum ECR/ECN INFORMATION: TITLE: N PLUG, JACK 50 AND 75 OHM EC No: URF2009-0672 SHEET No. 2 of 3 DATE: 2009 / 05 / 12 DOCUMENT NUMBER: PS-89675-322 CREATED / REVISED BY: CHECKED BY: APPROVED BY: JDW SSS JDW TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC PRODUCT SPECIFICATION 5.2 MECHANICAL REQUIREMENTS (continued) ITEM DESCRIPTION TEST CONDITION REQUIREMENT 15 Coupling Nut Retention Force MIL-PRF-39012, paragraph 3.25 100 lbs 16 Mating Characteristics MIL-PRF-39012, paragraph 3.7 Insertion Force Withdrawal Force 2.0 lbs Max 2.0 oz Min 17 Connector Durability MIL-PRF-39012, paragraph 3.15 18 Center Contact Retention 500 Cycles Min MIL-PRF-39012, paragraph 3.12 Axial Force Radial Torque 6 lbs Min N/A 5.3 ENVIRONMENTAL REQUIREMENTS ITEM DESCRIPTION TEST CONDITION REQUIREMENT 19 Vibration MIL-PRF-39012, paragraph 3.18 Per MIL-STD-202, Method 204 Test Condition B 20 Shock MIL-PRF-39012, paragraph 3.19 Per MIL-STD-202, Method 213 Test Condition I 21 Shock (Thermal) MIL-PRF-39012, paragraph 3.2 Per MIL-STD-202, Method 107 Test Condition B 22 Corrosion (Salt Spray) MIL-PRF-39012, paragraph 3.13 Per MIL-STD-202, Method 101 Test Condition B 23 Moisture Resistance MIL-PRF-39012, paragraph 3.21 Per MIL-STD-202, Method 106 DWV 1500 Vrms (after drying) REVISION: A ECR/ECN INFORMATION: TITLE: N PLUG, JACK 50 AND 75 OHM EC No: URF2009-0672 SHEET No. 3 of 3 DATE: 2009 / 05 / 12 DOCUMENT NUMBER: PS-89675-322 CREATED / REVISED BY: CHECKED BY: APPROVED BY: JDW SSS JDW TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC