ALUMINUM ELECTROLYTIC CAPACITORS FG High Grade Standard Type, For Audio Equipment series "Fine Gold" MUSE acoustic series suited for high grade audio equipment, using state of the art etching techniques. Rich sound in the bass register and clearer high end, most suited for AV equipment like DVD. Compliant to the RoHS directive (2002/95/EC). KZ FG High Grade FW High Grade Specifications Item Performance Characteristics – 40 to +85°C 6.3 to 100V 0.1 to 10000µF ± 20% at 120Hz, 20°C After 1 minute's application of rated voltage, leakage current is not more than 0.01CV or 3 (µA) , whichever is greater. Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current Measurement frequency : 120Hz at 20°C Tangent of loss angle (tan δ) Rated voltage (V) tan δ (MAX.) 6.3 10 0.22 0.19 16 0.16 25 0.14 35 50 63 80 100 0.12 0.10 0.09 0.09 0.08 For capacitance of more than 1000µF add 0.02 for every increase of 1000µF. Measurement frequency : 120Hz Rated voltage (V) Stability at Low Temperature Impedance ratio ZT / Z20 (MAX.) 6.3 10 16 25 35 50 63 80 100 Z– 25°C / Z+20°C 4 3 2 2 2 2 2 2 2 Z– 40°C / Z+20°C 8 6 4 4 3 3 3 3 3 The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 85°C. Endurance tan δ Within ±20% of the initial measurement for units of not more than 16V or φ6.3 Within ±15% of the initial measurement for units of not less than 25V or above φ6.3 150% or less than the initial specified value Leakage current Less than or equal to the initial specified value Capacitance change Shelf Life After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with black color letter on gold sleeve. Type numbering system (Example : 10V 47µF) Radial Lead Type 1 2 3 4 5 6 7 8 9 10 11 U F G 1 A 4 7 0 M DM φd Sleeve (P.E.T.) P ± 0.5 φD+0.5 MAX. Configuration Capacitance tolerance (±20%) φD Rated capacitance (47µF) 5 6.3 Rated voltage (10V) Series name Pressure relief vent (φ6.3up) L+ MAX. 15MIN 4MIN Code DM EM 8 · 10 PM 12.5 to 18 HM Type (mm) φD 5 6.3 8 10 12.5 16 18 P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 φd 0.6 0.6 0.6 0.6 0.8 0.8 0.8 (L < 20) 1.5 (L 20) 2.0 • Please refer to page 20 about the end seal configulation. Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next page. CAT.8100B ALUMINUM ELECTROLYTIC CAPACITORS FG series Dimensions Cap.(µF) 6.3 0J V Code 10 1A 16 1C 25 1E 35 1V 50 1H 0.1 0R1 05 × 11 1.1 0.22 R22 05 × 11 2.4 0.33 R33 05 × 11 3.6 0.47 R47 05 × 11 5.0 1 010 05 × 11 2.2 2R2 05 × 11 18 3.3 3R3 05 × 11 22 4.7 4R7 05 × 11 27 10 100 05 × 11 39 22 220 65 33 330 47 470 100 101 220 221 330 331 470 471 0.10 × 12.5 1000 102 10 × 20 2200 222 12.5 × 250. 3300 332 16 × 25 4700 472 0.16 × 31.5 6800 682 0.18 × 35.5 10000 103 18 × 40 2100 Cap.(µF) 50 6.3 × 11. 60 6.3 × 11. 05 × 11 57 6.3 × 11. 70 6.3 × 11. 75 0.08 × 11.5 93 60 6.3 × 11. 74 6.3 × 11. 85 00.8 × 11.5 101 0.08 × 11.5 111 6.3 × 11. 99 00.8 × 11.5 128 0.08 × 11.5 140 0.10 × 12.5 176 10 × 16 215 0.08 × 11.5 170 0.10 × 12.5 226 10 × 16 260 10 × 20 320 12.5 × 200. 390 0.10 × 12.5 247 10 × 16 309 10 × 20 351 12.5 × 200. 446 12.5 × 200. 488 270 10 × 16 330 10 × 20 406 12.5 × 20.0 476 12.5 × 250. 590 16 × 25 485 12.5 × 200. 601 12.5 × 250. 723 16 × 25 854 16 × 25 1060 0.16 × 31.5 867 16 × 25 1047 16 × 25 1290 0.16 × 35.5 1570 0.18 × 35.5 1840 1135 0.16 × 31.5 1520 0.16 × 35.5 1720 18 × 40 1794 1431 0.16 × 35.5 1840 0.18 × 35.5 2140 1810 18 × 40 2049 05 × 11 63 1J V Code 05 × 11 9.0 80 1K 650 1143 100 2A 0.1 0R1 05 × 11 2.3 0.22 R22 05 × 11 5.5 0.33 R33 05 × 11 0.47 R47 05 × 11 10 1 010 05 × 11 15 2.2 2R2 05 × 11 22 3.3 3R3 05 × 11 27 4.7 4R7 05 × 11 36 8.0 10 100 6.3 × 11. 50 6.3 × 11. 055 0.08 × 11.5 65 22 220 0.08 × 11.5 85 11.8 × 11.5 100 0.10 × 12.5 110 33 330 0.08 × 11.5 105 0.10 × 12.5 130 10 × 16 150 47 470 0.10 × 12.5 140 10 × 16 170 10 × 20 190 100 101 10 × 20 255 12.5 × 20.0 270 12.5 × 200 300 220 221 12.5 × 200. 420 12.5 × 25.0 490 16 × 25 549 330 331 12.5 × 250. 541 .016 × 31.5 650 0.16 × 31.5 734 470 471 16 × 25 840 .016 × 35.5 920 1000 102 0.18 × 35.5 1400 0.18 × 35.5 Case size φD × L (mm) Rated ripple 980 Rated ripple current (mArms) at 85°C 120Hz Frequency coefficient of rated ripple current Frequency 50Hz 120Hz 300Hz 1kHz 10kHz or more 0.1 to 47 0.75 1.00 1.35 1.57 2.00 100 to 470 0.80 1.00 1.23 1.34 1.50 1000 to 10000 0.85 1.00 1.10 1.13 1.15 Cap.(µF) CAT.8100B Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Nichicon: UFG1C472MHJ UFG1A332MHM UFG1C102MHM UFG0J102MPM UFG0J103MHM UFG0J222MHM UFG0J332MHM UFG0J471MPM UFG0J472MHM UFG0J682MHM UFG1A101MEM UFG1A102MHM UFG1A221MPM UFG1A222MHM UFG1A331MPM UFG1A470MDM UFG1A471MPM UFG1A472MHM UFG1A682MHM UFG1C101MPM UFG1C221MPM UFG1C222MHM UFG1C330MDM UFG1C331MPM UFG1C332MHM UFG1C470MEM UFG1C471MPM UFG1C472MHM UFG1E101MPM UFG1E102MHM UFG1E220MDM UFG1E221MPM UFG1E222MHM UFG1E330MEM UFG1E331MPM UFG1E471MHM UFG1H010MDM UFG1H100MDM UFG1H101MPM UFG1H102MHM UFG1H220MEM UFG1H221MHM UFG1H2R2MDM UFG1H330MPM UFG1H331MHM UFG1H3R3MDM UFG1H470MPM UFG1H471MHM UFG1H4R7MDM UFG1HR22MDM UFG1HR33MDM UFG1HR47MDM UFG1V101MPM UFG1V102MHM UFG1V220MEM UFG1V221MPM UFG1V222MHM UFG1V330MEM UFG1V331MHM UFG1V471MHM UFG1E332MHM UFG1E470MEM UFG1V470MEM UFG1H0R1MDM