ALUMINUM ELECTROLYTIC CAPACITORS KT For General Audio Equipment, Wide Temperature Range. KA series High Sound Quality 105°C standard for audio equipment. Compliant to the RoHS directive (2011/65/EU). KT High Sound Quality VZ Specifications Performance Characteristics Item –55 to +105°C 6.3 to 50V 0.1 to 33000µF ± 20% at 120Hz, 20°C After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.03CV or 4 (µA) , whichever is greater. After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV or 3 (µA) , whichever is greater. Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current Rated voltage (V) tan δ (MAX.) Tangent of loss angle (tan δ) 6.3 0.30 10 0.26 16 0.22 25 0.18 35 0.16 Measurement frequency : 120Hz at 20°C 50 0.14 For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF 6.3 5 10 Rated voltage (V) Z– 25°C / Z+20°C Stability at Low Temperature Impedance ratio ZT / Z20 (MAX.) Z– 40°C / Z+20°C 10 4 8 The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 105°C. Endurance 16 3 6 25 2 4 Capacitance change tan δ Leakage current 35 2 3 50 2 3 Measurement frequency : 120Hz Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value After storing the capacitors under no load at 105°C tor 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Printed with black color letter on pearl blue sleeve. Shelf Life Marking Radial Lead Type Type numbering system (Example : 16V 1000µF) 11 22 33 φφdd Sleeve Sleeve(P.E.T.) (P.E.T.) 44 55 66 77 88 99 10 10 11 11 Configuration Configuration Capacitance Capacitancetolerance tolerance(±20%) (±20%) φD++ φD ±0.5 PP±0.5 MAX. MAX. UU KK TT 11 CC 11 00 22 M M PP DD L+ L+ MIN 15 15MIN MAX. MAX. Rated Ratedcapacitance capacitance(1000µF) (1000µF) Rated Ratedvoltage voltage(16V) (16V) Series Seriesname name MIN 44MIN Type Type (mm) (mm) Pressure Pressure φD φD relief reliefvent vent PP (φ6.3up) (φ6.3up) φd φd 55 2.0 2.0 0.5 0.5 0.5 0.5 1.5 1.5 6.3 6.3 2.5 2.5 0.5 0.5 0.5 0.5 1.5 1.5 88 3.5 3.5 0.6 0.6 0.5 0.5 1.5 1.5 code 16 16 7.5 7.5 0.8 0.8 0.5 0.5 1.5 1.5 18 18 20 20 7.5 7.5 10.0 10.0 0.8 0.8 1.0 1.0 0.5 0.5 0.5 0.5 1.5 1.5 1.5 1.5 0R1 R22 R33 R47 010 2R2 3R3 4R7 100 220 330 470 101 221 331 471 102 222 332 472 682 103 153 223 333 10 1A 6.3 0J V 0.1 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 1000 2200 3300 4700 6800 10000 15000 22000 33000 12.5(25L 12.5(25Lororsmaller) smaller) 12.5(31.5L 12.5(31.5Lororgreater) greater) 5.0 5.0 5.0 5.0 0.6 0.8 0.6 0.8 0.5 0.5 0.5 0.5 1.5 1.5 1.5 1.5 Cap.(µF) Frequency 0.1 to 47 100 to 470 1000 to 33000 25 25 12.5 12.5 1.0 1.0 1.0 1.0 2.0 2.0 Configuration Configuration 5× 11 5× 11 5× 11 5× 11 6.3× 11 6.3× 11 8× 11.5 10× 12.5 10× 20 12.5× 20 12.5× 25 12.5× 35.5 12.5× 40 16× 35.5 18× 40 22× 50 45 55 65 95 160 195 270 420 710 910 1120 1360 1650 2010 2350 2800 5× 11 5× 11 5× 11 5× 11 6.3× 11 8× 11.5 8× 11.5 10× 16 12.5× 20 12.5× 25 12.5× 35.5 12.5× 40 16× 35.5 18× 40 22× 40 25× 50 16 1C 45 58 68 105 175 240 280 500 810 1050 1300 1570 1890 2400 2650 2880 50Hz 0.75 0.80 0.85 120Hz 1.00 1.00 1.00 300Hz 1.35 1.23 1.10 1kHz 1.57 1.34 1.13 5× 11 5× 11 5× 11 5× 11 5× 11 6.3× 11 8× 11.5 8× 11.5 10× 16 12.5× 20 12.5× 31.5 12.5× 35.5 16× 31.5 18× 35.5 20× 40 22× 50 φφDD 55 6.3 6.3 88· ·10 10 12.5 12.5toto18 18 20 to 20 to25 25 25 1E 35 54 65 79 115 190 265 315 560 920 1270 1480 1780 2060 2430 3000 5× 11 5× 11 5× 11 5× 11 5× 11 6.3× 11 8× 11.5 8× 11.5 10× 12.5 10× 20 12.5× 31.5 12.5× 35.5 16× 31.5 18× 35.5 20× 40 22× 50 Pb-free Pb-freeleadwire leadwire Pb-free Pb-freePET PETsleeve sleeve DD DD ED ED PD PD HD HD RD RD 35 1V 25 36 58 68 83 140 240 290 380 680 1200 1400 1710 2040 2150 2750 5× 11 5× 11 5× 11 5× 11 5× 11 6.3× 11 8× 11.5 10× 12.5 10× 16 12.5× 25 12.5× 40 16× 35.5 18× 35.5 20× 40 22× 50 28 41 61 75 93 150 260 350 460 860 1260 1610 1910 2150 2650 50 1H 5× 11 5× 11 5× 11 5× 11 5× 11 5× 11 5× 11 5× 11 5× 11 5× 11 5× 11 6.3× 11 8× 11.5 10× 12.5 10× 16 12.5× 20 12.5× 31.5 16× 35.5 18× 35.5 20× 40 22× 50 1.3 2.9 4.3 7.0 13 20 25 30 46 68 90 115 190 300 410 530 1040 1470 1770 2100 2500 Case size φ D × L (mm) Rated ripple Rated ripple current (mArms) at 105°C 120Hz Frequency coefficient of rated ripple current 22 22 10.0 10.0 1.0 1.0 1.0 1.0 2.0 2.0 • Please refer to page 20 about the end seal configuration. Dimensions Cap.(µF) 10 10 5.0 5.0 0.6 0.6 0.5 0.5 1.5 1.5 10kHz or more 2.00 1.50 1.15 Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. CAT.8100D