ONSEMI NSA5.0AFT3G

NSA5.0AFT3G
400 Watt Peak Power Zener
Transient Voltage
Suppressor
Unidirectional
http://onsemi.com
The NSA5.0AFT3G is designed to protect voltage sensitive
components from high voltage, high energy transients. It has
excellent clamping capability, high surge capability, low zener
impedance and a fast response time. The NSA5.0AFT3G is ideally
suited for use in communication systems, automotive, numerical
controls, process controls, medical equipment, business machines,
power supplies and many other industrial/consumer applications.
PLASTIC SURFACE MOUNT
ZENER OVERVOLTAGE
TRANSIENT SUPPRESSOR
400 W PEAK POWER
Features
•
•
•
•
•
•
•
•
Peak Power − 400 W @ 1 ms
ESD Rating of Class 3 (> 16 kV) per Human Body Model
ESD Rating IEC 61000−4−2 (> 30 kV)
Response Time is Typically < 1 ns
Flat Handling Surface for Accurate Placement
Package Design for Top Slide or Bottom Circuit Board Mounting
Low Profile Package
This is a Pb−Free Device
CATHODE
SMA−FL
CASE 403AA
MARKING DIAGRAM
Mechanical Characteristics:
CASE: Void-free, transfer-molded plastic
FINISH: All external surfaces are corrosion resistant and leads are
readily solderable
MAXIMUM CASE TEMPERATURE FOR SOLDERING PURPOSES:
260°C for 10 Seconds
POLARITY: Cathode indicated by molded polarity notch or polarity
band
ANODE
4AA
AYWWG
4AA
A
Y
WW
G
= Device Code
= Assembly Location
= Year
= Work Week
= Pb−Free Package
MOUNTING POSITION: Any
ORDERING INFORMATION
Device
Package
Shipping†
NSA5.0AFT3G
SMA−FL
(Pb−Free)
5000/Tape & Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
DEVICE MARKING INFORMATION
See specific marking information in the device marking
column of the Electrical Characteristics table on page 2 of
this data sheet.
© Semiconductor Components Industries, LLC, 2011
September, 2011 − Rev. 0
1
Publication Order Number:
NSA5.0AF/D
NSA5.0AFT3G
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Peak Power Dissipation (Note 1) @ TL = 25°C, Pulse Width = 1 ms
PPK
400
W
DC Power Dissipation @ TL = 75°C
Measured Zero Lead Length (Note 2)
Derate Above 75°C
Thermal Resistance from Junction to Lead
PD
1.5
W
RqJL
20
50
mW/°C
°C/W
W
mW/°C
°C/W
DC Power Dissipation (Note 3) @ TA = 25°C
Derate Above 25°C
Thermal Resistance from Junction to Ambient
PD
RqJA
0.5
4.0
250
Forward Surge Current (Note 4) @ TA = 25°C
IFSM
40
A
TJ, Tstg
−65 to +150
°C
Operating and Storage Temperature Range
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
1. 10 X 1000 ms, non−repetitive.
2. 1″ square copper pad, FR−4 board.
3. FR−4 board, using ON Semiconductor minimum recommended footprint, as shown in 403AA case outline dimensions spec.
4. 1/2 sine wave (or equivalent square wave), PW = 8.3 ms, duty cycle = 4 pulses per minute maximum.
ELECTRICAL CHARACTERISTICS
I
(TA = 25°C unless otherwise noted)
Symbol
IF
Parameter
IPP
Maximum Reverse Peak Pulse Current
VC
Clamping Voltage @ IPP
VRWM
IR
VBR
VC VBR VRWM
Working Peak Reverse Voltage
V
IR VF
IT
Maximum Reverse Leakage Current @ VRWM
Breakdown Voltage @ IT
IT
Test Current
IF
Forward Current
VF
Forward Voltage @ IF
IPP
Uni−Directional TVS
ELECTRICAL CHARACTERISTICS
Device
Device
Marking
VRWM
(Note 5)
IR @
VRWM
Volts
mA
VC @ IPP
(Note 7)
Breakdown Voltage
VBR (Volts) (Note 6)
Min
Nom
Max
@ IT
VC
IPP
C Typ.
(Note 8)
mA
Volts
Amps
pF
VF @ IF
(Note 9)
Max
V
NSA5.0AFT3G
QA
5.0
400
6.4
6.7
7.0
10
9.2
43.5
2450
3.5
5. A transient suppressor is normally selected according to the working peak reverse voltage (VRWM), which should be equal to or greater than
the DC or continuous peak operating voltage level.
6. VBR measured at pulse test current IT at an ambient temperature of 25°C.
7. Surge current waveform per Figure 2 and derate per Figure 3.
8. Bias voltage = 0 V, F = 1.0 MHz, TJ = 25°C.
9. 1/2 sine wave or equivalent, PW = 8.3 ms, non−repetitive, IF = 30 A.
http://onsemi.com
2
NSA5.0AFT3G
RATING AND TYPICAL CHARACTERISTIC CURVES
120
NONREPETITIVE
PULSE WAVEFORM
SHOWN IN FIGURE 2.
TA = 25°C
10
Ippm, PEAK PULSE CURRENT (%)
Ppk , PEAK POWER (kW)
100
1
0.1
10-4
100
0.01
0.1
tP, PULSE WIDTH (ms)
1
PEAK VALUE
Ippm
80
60
HALF VALUE - Ipp/2
40
10/1000 ms WAVEFORM
AS DEFINED BY R.E.A.
20
0
0.001
10
td
0
1
2
3
5
4
t, TIME (ms)
Figure 1. Pulse Rating Curve
Figure 2. Pulse Waveform
120
10,000
10 x 1000 WAVEFORM
AS DEFINED BY R.E.A.
NSA5.0AF
C, CAPACITANCE (pF)
100
80
60
40
TJ = 25°C
F = 1 MHz
1,000
100
10
20
0
1
0
40
80
120
160
TA, AMBIENT TEMPERATURE (°C)
200
1
Figure 3. Pulse Derating Curve
PD , MAXIMUM POWER DISSIPATION (WATTS)
PEAK PULSE DERATING IN % OF
PEAK POWER OR CURRENT
TA = 25°C
PW (ID) IS DEFINED AS THE
POINT WHERE THE PEAK CURRENT
DECAYS TO 50% OF Ipp.
≤ 10 ms
10
BIAS VOLTAGE (VOLTS)
Figure 4. Typical Junction Capacitance vs.
Bias Voltage
6
5
4
@ TL = 75°C
PD = 1.5 W
3
2
@ TA = 25°C
PD = 0.5 W
1
0
0
25
50
100
75
T, TEMPERATURE (°C)
125
Figure 5. Steady State Power Derating
http://onsemi.com
3
150
100
NSA5.0AFT3G
PACKAGE DIMENSIONS
SMA−FL
CASE 403AA−01
ISSUE O
E
E1
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
D
DIM
A
b
c
D
E
E1
L
TOP VIEW
A
c
2X
MILLIMETERS
MIN
MAX
0.90
1.10
1.25
1.65
0.15
0.30
2.40
2.80
4.80
5.40
4.00
4.60
0.70
1.10
RECOMMENDED
SOLDER FOOTPRINT*
C
SIDE VIEW
SEATING
PLANE
5.56
1.76
b
1.30
2X
BOTTOM VIEW
DIMENSIONS: MILLIMETERS
L
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5773−3850
http://onsemi.com
4
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
NSA5.0AF/D