PJUSB208DW LOW CAPACITANCE DIODE ARRAY The PJUSB208DW has a low capacitance of 0.9pF and operates with virtually no insertion loss to 1GHz. This makes the device ideal for usage of high-speed data lines such as USB2.0, Firewire, DVI, and gigabit Ethernet interfaces. The low capacitance array configuration enable users to apply to four high-speed data or transmission lines. FEATURES • Low leakage current, maximum of 0.1A at rated voltage 0.087(2.20) 0.074(1.90) • Protect four I/O lines 0.018(0.45) 0.006(0.15) • Maximum Capacitance of 1.0pF at 0Vdc 1MHz Line-to-Ground 0.010(0.25) 0.087(2.20) 0.078(2.00) • Flammability rating UL94V-0 • Lead f ree in comply with EU RoHS 2011/65/EU directives. • Green molding c ompound as per IEC61249 Std. . (Halogen Free) 0.054(1.35) 0.045(1.15) 0.030(0.75) 0.021(0.55) MECHANICAL DATA 0.010(0.25) 0.003(0.08) 0.056(1.40) 0.047(1.20) 0.040(1.00) 0.031(0.80) • Case: SOT-363, Plastic • Terminals: Solderable per MIL-STD-750, Method 2026 • Polarity: See Diagram Below 0.004(0.10) 0.000(0.00) • Marking : 8DW 0.012(0.30) 0.005(0.15) APPLICATIONS 0.044(1.10) MAX. • Approx.Weight : 0.0002 ounces,0.006 grams • USB 2.0 and Firewire Port Protection • LAN / W LAN Access Point terminals • Video Signal Line Protection o MAXIMUM RATINGS (T A=25 C unlesss otherwise noted) RATING SYMBOL VALUE UNITS Re cti fi e r Re p e ti ti ve P e a k Re ve rs e Vo lta g e V RRM 70 V E S D p e r IE C 6 1 0 0 0 -4 -2 (A i r) (No te .1 ) E S D p e r IE C 6 1 0 0 0 -4 -2 (C o nta ct) (No te .1 ) V ESD + 15 +8 kV S urg e No n Re p e ti ti ve F o rwa rd C urre nt-Re c ta ng ula r wa ve fo rm tp =1 m s tp =1 0 0 m s I Op e ra ti ng J unc ti o n Te m p e ra ture a nd S to ra g e Te mp e ra ture Ra ng e December 20,2012-REV.00 FS M T J ,T STG 2 0.5 -55 to + 150 A o C PAGE . 1 PJUSB208DW ELECTRICAL CHARACTERISTICS (TJ=25oC) PARAMETER SYMBOL CONDITION MIN. TYP. MAX. UNIT - - 70 V Peak Reverse Stand-Off Voltage VRRM Reverse Breakdown Voltage VBR I BR = 50uA 85 - - V Reverse Leakage Current IR V RWM = 70V - 0.04 0.1 uA Off State Junction Capacitance CJ 0Vdc,f=1MHz between I/O lines and GND - - 1 pF Off State Junction Capacitance CJ 0Vdc,f=1MHz between I/O lines - - 0.9 pF +Vcc ESD SURGE C=100nF I/O VI/O GND Note.1 ESD behavior: Measurements conditions (with coupling capacitance) December 20,2012-REV.00 PAGE . 2 PJUSB208DW 0.9 IR, Reverse Current (uA) CJ, Junction Capacitance (pF) RATING AND CHARACTERISTIC CURVES 0.8 0.7 I/O to GND 0.6 0.5 0.4 0.3 I/O to I/O 0.2 0.1 0.0 0 20 40 60 80 VR, Reverse Bias Voltage (V) 1000 TJ = 150°C 100 10 TJ = 125°C 1 TJ = 75°C TJ = 25°C 0.1 0.01 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Fig.1 Typical Junction Capacitance Fig.2 Typical Reverse Characteristics IF, Forward Current (A) 0.1 TJ=150°C 0.01 TJ=125°C TJ=75°C 0.001 TJ=25°C 0.0001 0 0.2 0.4 0.6 0.8 1 VF, Forward Voltage (V) Fig.3 Typical Forward Characteristics December 20,2012-REV.00 PAGE . 3 PJUSB208DW MOUNTING PAD LAYOUT SOT-363 Unit：inch(mm) 0.075 (1.90) 0.020 (0.50) 0.018 (0.45) 0.026 (0.65) 0.026 (0.65) ORDER INFORMATION • Packing information T/R - 10K per 13" plastic Reel T/R - 3K per 7” plastic Reel December 20,2012-REV.00 PAGE . 4 PJUSB208DW Part No_packing code_Version PJUSB208DW_R1_00001 PJUSB208DW_R2_00001 For example : RB500V-40_R2_00001 Serial number Version code means HF Packing size code means 13" Packing type means T/R Part No. Packing Code XX Packing type Tape and Ammunition Box (T/B) Tape and Reel (T/R) Bulk Packing (B/P) Tube Packing (T/P) Tape and Reel (Right Oriented) (TRR) Tape and Reel (Left Oriented) (TRL) FORMING December 20,2012-REV.00 Version Code XXXXX 1st Code Packing size code A N/A 0 HF 0 serial number R 7" 1 RoHS 1 serial number B 13" 2 T 26mm X S 52mm Y L F PANASERT T/B CATHODE UP (PBCU) PANASERT T/B CATHODE DOWN (PBCD) 2nd Code HF or RoHS 1st Code 2nd~5th Code U D PAGE . 5 PJUSB208DW Disclaimer z Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. z Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. z Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. z Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. z Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. z The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. z Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. December 20,2012-REV.00 PAGE . 6