RD0106T Ordering number : ENA1704A SANYO Semiconductors DATA SHEET RD0106T Diffused Junction Silicon Diode Low VF • High-Speed Switching Diode Features • • • High breakdown voltage (VRRM=600V) Low forward voltage (VF max=1.3V) Halogen free compliance Fast reverse recovery time Low switching noise • • Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Repetitive Peak Reverse Voltage VRRM Average Output Current Surge Forward Current IO IFSM Junction Temperature Tj Storage Temperature Tstg Conditions Ratings Sine wave 10ms Package Dimensions unit : mm (typ) Package Dimensions unit : mm (typ) 7518-002 7003-001 1 2 2.3 7.5 1 1 : No Contact 2 : Cathode 3 : Anode 4 : Cathode 3 2 °C 0 to 0.2 1 : No Contact 2 : Cathode 3 : Anode 4 : Cathode 1.2 2.3 2.3 SANYO : TP-FA SANYO : TP 2.3 --55 to +150 3 0.6 0.5 A °C 2.5 0.8 0.8 1.6 0.6 1.2 10 150 1.2 5.5 0.5 0.85 0.85 0.7 A RD0106T-TL-H 0.5 1.5 4 7.0 5.5 4 2.3 6.5 5.0 RD0106T-H 1.5 0.5 V 1 7.0 2.3 6.5 5.0 Unit 600 Product & Package Information • Package : TP • JEITA, JEDEC : SC-64, TO-251 • Minimum Packing Quantity : 500 pcs./bag Marking (TP, TP-FA) • Package : TP-FA • JEITA, JEDEC : SC-63, TO-252 • Minimum Packing Quantity : 700 pcs./reel Packing Type (TP-FA) : TL Electrical Connection 4 R0106 LOT No. TL 1 2 3 http://www.sanyosemi.com/en/network/ 82912 TKIM/42110SC TKIM TC-00002327 No. A1704-1/7 RD0106T Electrical Characteristics at Ta=25°C Parameter Symbol Reverse Voltage VR VF IR Forward Voltage Reverse Current Ratings Conditions min IR=1mA IF=1A typ 600 V 1.1 VR=600V IF=1A, di / dt=100A/μs Reverse Recovery Time trr1 trr2 Thermal Resistance Rth(j-c) Unit max 40 IF=0.5A, IR=1A Junction -Case 1.3 V 10 μA 50 ns 16 ns 6 °C / W Ordering Information Device Package Shipping TP 500pcs./bag TP-FA 700pcs./reel RD0106T-H RD0106T-TL-H IF -- VF 10 memo Pb Free and halogen Free IR -- VR 100 Reverse Current, IR -- μA °C 0°C -25 °C 75 °C 1.0 0.001 0 0.2 0.6 0.8 1.0 1.2 Forward Voltage, VF -- V Junction Capacitance, Cj -- pF 3 2 10 7 5 3 2 3 75°C 0.1 50°C 0.01 5 7 1.0 2 3 5 7 10 Reverse Voltage, VR -- V 0.001 1.4 f=100kHz 2 100°C 1.0 25°C 0 100 200 2 3 5 7 100 IT15499 300 400 500 Reverse Voltage, VR -- V IT15497 Cj -- VR 5 1.0 0.1 125°C 10 50°C 0.4 600 IT15498 IFSM -- t 14 Surge Forward Current, IFSM(Peak) -- A 0.01 25° C 50° C 125 °C 10 0 0.1 Ta= 1 Forward Current, IF -- A Ta=150°C 12 10 8 6 4 2 0 7 0.01 2 3 5 7 0.1 2 Time, t -- s 3 5 7 1.0 2 3 IT15500 No. A1704-2/7 RD0106T Taping Specification RD0106T-TL-H No. A1704-3/7 RD0106T Outline Drawing RD0106T-TL-H Land Pattern Example Mass (g) Unit 0.282 mm * For reference Unit: mm 7.0 7.0 2.5 2.0 1.5 2.3 2.3 No. A1704-4/7 RD0106T Bag Packing Specification RD0106T-H No. A1704-5/7 RD0106T Outline Drawing RD0106T-H Mass (g) Unit 0.315 mm * For reference No. A1704-6/7 RD0106T Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for new introduction or other application different from current conditions on the usage of automotive device, communication device, office equipment, industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. Regarding monolithic semiconductors, if you should intend to use this IC continuously under high temperature, high current, high voltage, or drastic temperature change, even if it is used within the range of absolute maximum ratings or operating conditions, there is a possibility of decrease reliability. Please contact us for a confirmation. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of August, 2012. Specifications and information herein are subject to change without notice. PS No. A1704-7/7