SB05-05P Ordering number : EN2999C SANYO Semiconductors DATA SHEET SB05-05P Schottky Barrier Diode 50V, 500mA Rectifier Applications • High frequency rectification (switching regulators, converters, choppers) Features • • • • Fast reverse recovery time (trr max=10ns) Low forward voltage (VF max=0.55V) Low switching noise Low leakage current and high reliability due to highly reliable planar structure Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Repetitive Peak Reverse Voltage Nonrepetitive Peak Reverse Surge Voltage Average Output Current Conditions Ratings VRRM VRSM Surge Forward Current IO IFSM Junction Temperature Storage Temperature 50Hz sine wave, 1 cycle Unit 50 V 55 V 500 mA 5 A Tj --55 to +125 °C Tstg --55 to +125 °C Package Dimensions Product & Package Information unit : mm (typ) 7007B-001 • Package : PCP • JEITA, JEDEC : SC-62, SOT-89, TO-243 • Minimum Packing Quantity : 1,000 pcs./reel SB05-05P-TD-E 4.5 1.6 1 2 0.4 SB Marking TD 3 Electrical Connection 0.4 0.5 Packing Type: TD 4.0 1.0 2.5 1.5 LOT No. Top View 1.5 3.0 0.75 1 2 3 1 : Anode 2 : Cathode 3 : No Contact Bottom View SANYO : PCP http://semicon.sanyo.com/en/network 72512 TKIM/62005SB MSIM TB-00001395/33098 HA (KT)/92995 GI (KOTO)/D288 TA, TS No.2999-1/6 SB05-05P Electrical Characteristics at Ta=25°C Parameter Symbol Reverse Voltage VR VF IR Forward Voltage Reverse Current Conditions IR=200μA IF=500mA typ max 50 VR=25V VR=10V, f=1MHz 50 C Reverse Recovery Time trr Rth(j-a)1 IF=IR=100mA, See specified Test Circuit. Rth(j-a)2 When mounted on ceramic substrate (250mm2×0.8mm) Unit V 0.55 Interterminal Capacitance Thermal Resistance Ratings min 18 V μA pF 10 ns 310 °C / W 120 °C / W trr Test Circuit 100Ω 10μs 10Ω 100mA 50Ω 10mA 100mA Duty≤10% --5V trr Ordering Information Device SB05-05P-TD-E Package Shipping memo PCP 1,000pcs./reel Pb Free No.2999-2/6 SB05-05P IF -- VF 5 2 3 °C Ta=125 1000 Reverse Current, IR -- μA 2 1.0 7 5 C 5° 2 =1 Ta 3 25 °C Forward Current, IF -- A IR -- VR 5 2 0.1 7 5 3 5 100°C 2 100 75°C 5 2 50°C 10 5 25°C 2 1.0 5 2 2 0.1 0.01 0 0.2 0.4 0.6 0.8 1.0 (4) Rectangular wave (3) (2) (1) θ 360° 200 Sine wave 100 180° 360° 0 0 200 100 300 400 500 600 ID00351 IFSM -- t 7 30 40 50 60 70 ID00350 C -- VR f=1MHz 400 300 20 2 (1)Rectangular wave θ=60° (2)Rectangular wave θ=120° (3)Rectangular wave θ=180° (4)Sine wave θ=180° 500 10 Reverse Voltage, VR -- V PF(AV) -- IO 600 Average Output Current, IO -- mA Surge Forward Current, IFSM(Peak) -- A 0 1.2 ID00349 Interterminal Capacitance, C -- pF Average Forward Power Dissipation, PF(AV) -- mW Forward Voltage, VF -- V 100 7 5 3 2 10 7 5 3 1.0 2 3 5 7 10 2 3 Reverse Voltage, VR -- V 5 7 100 ID00352 Current waveform 50Hz sine wave 6 IS 20ms 5 t 4 3 2 1 0 7 0.01 2 3 5 7 0.1 2 Time, t -- s 3 5 7 1.0 2 3 ID00353 No.2999-3/6 SB05-05P Embossed Taping Specification SB05-05P-TD-E No.2999-4/6 SB05-05P Outline Drawing SB05-05P-TD-E Land Pattern Example Mass (g) Unit 0.058 mm * For reference Unit: mm 0.9 2.2 3.7 45° 45° 1.0 1.8 1.5 1.0 1.5 3.0 No.2999-5/6 SB05-05P Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for new introduction or other application different from current conditions on the usage of automotive device, communication device, office equipment, industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. Regarding monolithic semiconductors, if you should intend to use this IC continuously under high temperature, high current, high voltage, or drastic temperature change, even if it is used within the range of absolute maximum ratings or operating conditions, there is a possibility of decrease reliability. Please contact us for a confirmation. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of July, 2012. Specifications and information herein are subject to change without notice. PS No.2999-6/6