SBT100-16JS Ordering number : ENA0442 SANYO Semiconductors DATA SHEET SBT100-16JS Schottky Barrier Diode (Twin Type · Cathode Common) 160V, 10A Rectifier Applications • High frequency rectification (switching regulators, converters, choppers). Features • • • • • • Tj=150°C. Low forward voltage (VF max=0.88V). Short reverse recovery time. Low switching noise. High reliability due to highly reliable planar structure. Attachment workability is good by Mica-less package. Specifications Absolute Maximum Ratings at Ta=25°C Parameter Repetitive Peak Reverse Voltage Nonrepetitive Peak Reverse Surge Voltage Symbol Conditions Ratings VRRM VRSM Average Output Current IO Surge Forward Current IFSM 50Hz resistive load, Sine wave Tc=78°C 50Hz sine wave, 1 cycle Unit 160 V 165 V 10 A 100 A Junction Temperature Tj --55 to +150 °C Storage Temperature Tstg --55 to +150 °C Electrical Characteristics at Ta=25°C Parameter Symbol Reverse Voltage VR Forward Voltage VF Reverse Current IR Interterminal Capacitance C Thermal Resistance Rth(j-c) Conditions IR=2mA, Tj=25°C* IF=5A, Tj=25°C* VR=160V, Tj=25°C* VR=10V, Tj=25°C* Junction-Case : Smoothed DC Ratings min typ max 160 Unit V 0.82 0.88 V 20 200 µA 4.0 °C / W 100 pF Note) * : Value per element Any and all SANYO Semiconductor products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO Semiconductor representative nearest you before usingany SANYO Semiconductor products described or contained herein in such applications. SANYO Semiconductor assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor products described or contained herein. http://semicon.sanyo.com/en/network TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 82306 / 61506SD MS IM TB-00002384 No. A0442-1/3 SBT100-16JS Package Dimensions Electrical Connection unit : mm 7525-001 Anode 10.0 Anode 4.5 3.2 7.2 3.5 2.8 3.6 16.0 Cathode 1.6 14.0 1.2 0.75 1 2 3 0.7 2.4 1 : Anode 2 : Cathode 3 : Anode 2.55 2.55 SANYO : TO-220ML(LS) IF -- VF 3 2 50°C Forward Current, IF -- A Reverse Current, IR -- mA Tj=1 10 C 25° 7 5 3 2 1.0 7 5 3 2 100 7 5 p 0°C ty Tj=15 3 2 125°C 10 7 5 typ typ 100°C 3 2 75°C 1.0 7 5 typ 3 2 0.1 0.5 1.0 1.5 2.0 Forward Voltage, VF -- V Sine wave 18 (3) 180° 16 360° (2) 14 Rectangular wave 12 10 (4) (1) θ 360° 8 6 (1)Rectangular wave θ=60° (2)Rectangular wave θ=120° (3)Rectangular wave θ=180° (4)Sine wave θ=180° 4 2 0 0 2 4 6 8 10 Average Output Current, IO -- A 20 40 12 14 IT10964 60 80 100 120 140 Reverse Voltage, VR -- V IT10962 PF(AV) -- IO 20 0 2.5 Average Reverse Power Dissipation, PR(AV) -- W 0 Average Forward Power Dissipation, PF(AV) -- W IR -- VR 2 Represented by max 16 180 IT10963 PR(AV) -- VRM 12 (1)Rectangular wave θ=300° (2)Rectangular wave θ=240° (3)Rectangular wave θ=180° (4)Sine wave θ=180° 10 Rectangular wave 14 160 (1) (2) VR θ 8 (3) 360° 6 Sine wave VR 4 (4) 180° 2 360° 0 0 20 40 60 80 100 120 140 Peak Reverse Voltage, VRM -- V 160 180 IT10965 No. A0442-2/3 SBT100-16JS Tc -- IO 170 (1)Rectangular wave θ=60° (2)Rectangular wave θ=120° (3)Rectangular wave θ=180° (4)Sine wave θ=180° Interterminal Capacitance, C -- pF 130 f=100kHz Rectangular wave 100 θ 360° 90 70 Sine wave (1) (2) (4) (3) 50 180° 2 30 0 4 6 8 10 12 Average Output Current, IO -- A Surge Forward Current, IFSM(Peak) -- A 100 7 5 3 100 IS 20ms t 80 60 40 20 0 3 5 7 0.1 2 Time, t -- s 3 5 7 1.0 2 3 ID01041 2 3 5 7 2 10 3 5 Reverse Voltage, VR -- V IT10966 Current waveform 50Hz sine wave 2 2 2 1.0 14 IFSM -- t 120 7 0.01 3 360° Transient Thermal Resistance, Rth(j-c) -- °C / W Case Temperature, Tc -- °C 150 C -- VR 5 7 100 IT10967 Rth(j-c) -- t 10 7 5 3 2 1.0 7 5 3 2 0.001 2 3 5 70.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Time, t -- s 5 7 10 2 ID01058 Specifications of any and all SANYO Semiconductor products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Semiconductor Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor products (including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Semiconductor Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO Semiconductor believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of June, 2006. Specifications and information herein are subject to change without notice. PS No. A0442-3/3