SANYO TND523SS

TND523SS
Ordering number : EN9005
SANYO Semiconductors
DATA SHEET
TND523SS
ExPD(Excellent Power Device)
Single-phase High Side Drive Application
Features
•
•
•
•
Single-phase high side drive
Allows simplified configuration of driver circuit
Fully compatible input to LSTTL/CMOS
Output current: 170mA Source, 340mA Sink
•
•
•
•
Monolithic structure
Withstand voltage of 600V is assured
High-speed switching
Halogen free compliance
Specifications
Absolute Maximum Ratings at Ta=25°C (All voltage parameters are absolute voltage feferenced to GND)
Parameter
Symbol
High Side Floating Supply Voltage
High Side Floating Supply Offset Voltage
High Side Output Voltage
Logic Supply Voltage
VHOUT
VDD
Logic Input Voltage
VHIN
The Maximum Allowable Offset
Conditions
Ratings
VH
VS
Unit
--0.3 to 625
V
VH--25 to VH+0.3
V
VS--0.3 to VH+0.3
V
--0.3 to 25
V
--0.3 to VDD+0.3
V
dVS/dt
Voltage Supply
Allowable Power Dissipation
PD
Junction Temperature
Storage Temperature
When mounted on ceramic substrate (1200mm2×0.8mm)
50
V/ns
0.3
W
1.2
W
Tj
--55 to +150
°C
Tstg
--55 to +150
°C
Package Dimensions
Product & Package Information
unit : mm (typ)
7005A-013
• Package
: SOP8
• JEITA, JEDEC
: SC-87, SOT-96
• Minimum Packing Quantity : 1,000 pcs./reel
5
Packing Type: TL
Marking
TND
523
4.4
Block Diagram
VH
8
SANYO : SOP8
HIN
2
Latch Circuit
VDD
3
High Voltage
Logic Level Shift
0.43
LOT No.
Pulse Gain
4
1.27
TL
Level Shift
1
1 : No Contact
2 : HIN
3 : VDD
4 : GND
5 : No Contact
6 : VS
7 : HOUT
8 : VH
UV Circuit
1.5
1.8 MAX
0.7
0.8
6.0
0.1
UV Circuit
8
0.2
0.3
0.8
5.0
HOUT
7
VS
6
GND
4
http://semicon.sanyo.com/en/network
60811IP TKIM TC-00002602 No.9005-1/8
TND523SS
Recommend Operating Conditions at Ta=25°C
Parameter
High Side Floating Supply Voltage
High Side Floating Supply Offset Voltage
High Side Output Voltage
Symbol
Logic Input Voltage
VHOUT
VDD
VHIN
Ambient Temperature
Topr
Logic Supply Voltage
Conditions
Ratings
VH
VS
Unit
VS+10 to VS+20
0 to 600
V
V
VS to VH
10 to 20
V
0 to VDD
--40 to +125
°C
V
V
AC Characteristics at Ta=25°C (VDD=VHS=15V, CL=1000pF)
Parameter
Turn-ON Delay Time
Turn-OFF Delay Time
Turn-ON Rise Time
Turn-OFF Fall Time
Symbol
ton
toff
Ratings
Conditions
min
typ
Unit
max
VS=0V
60
90
120
ns
VS=0V
55
85
115
ns
50
80
110
ns
20
35
55
ns
tr
tf
DC Characteristics at Ta=25°C (VDD=VHS=15V)
Parameter
Logic “1” Input Voltage
Symbol
Ratings
Conditions
min
typ
Unit
max
VIH
VIL
VDD=10 to 20V
Logic “0” Input Voltage
VDD=10 to 20V
0.8
V
High-level Output Voltage, VBIAS-VO
VOH
VHIN=VIH, IO=0A
0.1
V
Low-level Output Voltage, VO
VOL
VHIN=VIL, IO=0A
0.1
V
Offset Supply Leakage Current
ILK
IQH
VH=VS=600V
10
μA
μA
Quiescent VH Supply Current
Quiescent VDD Supply Current
Logic “1” Input Bias Current
IQDD
IIN+
Logic “0” Input Bias Current
IIN-
VH Supply Undervoltage
Positive Going Threshold
VH Supply Undervoltage
Negative Going Threshold
VDD Supply Undervoltage
Positive Going Threshold
VDD Supply Undervoltage
Negative Going Threshold
Output High Short Circuit Pulsed Current
Output Low Short Circuit Pulsed Current
3.0
VHIN=0V or VDD
VHIN=0V or VDD
VHIN=VDD
VHIN=0V
V
70
120
140
230
μA
20
55
μA
1
μA
VHUV+
7.6
8.9
9.9
V
VHUV-
6.7
8.1
9.5
V
VDDUV+
7.6
8.9
9.9
V
VDDUV-
6.7
8.1
9.5
V
170
200
mA
340
400
mA
IO+
IO-
VHOUT=0V, VHIN=15V, PW≤10μs
VHOUT=15V, VHIN=0V, PW≤10μs
Switching Time Waveform Definition
50%
50%
HIN
ton
tr
toff
90%
HOUT
10%
tf
90%
10%
No.9005-2/8
TND523SS
Switching Time Test Circuit
VDD=15V
10μF
0.1μF
3
VH=15V
8
0.1μF
2
HIN
10μF
6
VS=0V
CL
7
HOUT
4
IT16457
ton -- Tc
150
max
typ
100
min
50
0
--50
--25
0
25
50
75
100
Case Temperature, Tc -- °C
150
max
100
typ
min
50
0
10
125
VS=0V
12
14
16
18
VDD, VHS -- V
IT16458
toff -- Tc
200
ton -- VDD, VHS
200
VS=0V
VDD=VHS=15V
Turn-ON Delay Time, ton -- ns
Turn-ON Delay Time, ton -- ns
200
toff -- VDD, VHS
200
VS=0V
Turn-OFF Delay Time, toff -- ns
Turn-OFF Delay Time, toff -- ns
VS=0V
VDD=VHS=15V
150
max
100
typ
min
50
0
--50
--25
0
20
IT16459
25
50
75
Case Temperature, Tc -- °C
100
125
IT16460
150
max
100
typ
min
50
0
10
12
14
16
VDD, VHS -- V
18
20
IT16461
No.9005-3/8
TND523SS
tr -- Tc
200
Turn-ON Rise Time, tr -- ns
Turn-ON Rise Time, tr -- ns
CL=1000pF
150
max
100
typ
min
50
0
--50
--25
0
25
50
75
100
Case Temperature, Tc -- °C
60
40
typ
min
20
25
50
75
100
Case Temperature, Tc -- °C
14
16
18
20
IT16463
tf -- VDD, VHS
80
60
max
40
typ
0
10
125
min
20
12
14
16
18
20
VDD, VHS -- V
IT16464
VIH -- Tc
5
12
CL=1000pF
max
0
min
50
100
80
--25
typ
VDD, VHS -- V
CL=1000pF
VDD=VHS=15V
0
--50
max
100
0
10
125
Turn-OFF Fall Time, tf -- ns
Turn-OFF Fall Time, tf -- ns
100
150
IT16462
tf -- Tc
120
tr -- VDD, VHS
200
CL=1000pF
VDD=VHS=15V
IT16465
VIH -- VDD
5
Logic "1" Input Voltage, VIH -- V
Logic "1" Input Voltage, VIH -- V
VDD=10V to 20V
4
min
3
2
1
0
--50
--25
0
25
50
75
100
Case Temperature, Tc -- °C
2
1
0
10
125
min
3
12
14
16
18
20
Logic Circuit Supply Voltage, VDD -- V
IT16466
VIL -- Tc
2.0
4
VIL -- VDD
2.0
IT16467
Logic "0" Input Voltage, VIL -- V
Logic "0" Input Voltage, VIL -- V
VDD=10V to 20V
1.5
1.0
max
0.5
0
--50
--25
0
25
50
75
Case Temperature, Tc -- °C
100
125
IT16468
1.5
1.0
max
0.5
0
10
12
14
16
18
20
Logic Circuit Supply Voltage, VDD -- V
IT16469
No.9005-4/8
TND523SS
VOH -- Tc
175
150
125
max
75
50
25
--25
0
25
50
75
100
Case Temperature, Tc -- °C
Low-level Output Voltage, VOL -- mV
VHIN=VIL
IO=0A
150
125
max
75
50
25
0
--50
--25
0
25
50
75
100
Case Temperature, Tc -- °C
Offset Supply Leakage Current, ILK -- μA
80
60
40
max
--25
0
25
50
75
100
Case Temperature, Tc -- °C
Quiescent VH Supply Current, IQH -- μA
150
max
100
typ
75
50
25
0
--50
--25
0
25
50
12
14
75
Case Temperature, Tc -- °C
100
125
IT16476
16
18
20
IT16471
VOL -- VHS
VHIN=VIL
IO=0A
175
150
125
max
100
75
50
25
12
14
16
18
20
VHS -- V
IT16473
ILK -- VH
VH=VS=600V
100
80
60
40
20
0
max
0
100
200
300
400
500
High Side Floating Supply Voltage, VH -- V
IQH -- VHS
200
175
125
25
0
10
125
VHIN=0V or VDD
VHS=15V
200
50
IT16474
IQH -- Tc
225
75
120
100
0
--50
max
100
VHS -- V
125
VH=VS=600V
20
125
IT16472
ILK -- Tc
120
150
200
175
100
175
IT16470
VOL -- Tc
200
VHIN=VIH
IO=0A
0
10
125
Low-level Output Voltage, VOL -- mV
0
--50
Offset Supply Leakage Current, ILK -- μA
100
VOH -- VHS
200
High-level Output Voltage, VOH -- mV
VHIN=VIH
IO=0A
Quiescent VH Supply Current, IQH -- μA
High-level Output Voltage, VOH -- mV
200
600
IT16475
VHIN=0V or VDD
175
150
max
125
100
typ
75
50
25
0
10
12
14
16
VHS -- V
18
20
IT16477
No.9005-5/8
VHIN=0V or VDD
350
300
max
200
typ
150
100
50
0
--50
--25
0
25
50
75
100
Case Temperature, Tc -- °C
Logic "1" Input Bias Current, IIN(+) -- μA
80
max
40
typ
20
0
--50
--25
0
25
50
75
100
Case Temperature, Tc -- °C
Logic "0" Input Bias Current, IIN(--) -- μA
3
2
max
--25
0
25
50
75
100
Case Temperature, Tc -- °C
7
0
25
50
0
10
12
14
75
Case Temperature, Tc -- °C
100
125
IT116484
16
18
20
IIN(+) -- VDD
IT16479
VHIN=VDD
80
60
max
40
typ
20
12
14
16
18
20
IIN(--) -- VDD
IT16481
VHIN=VDD
4
3
2
max
1
0
10
12
14
16
18
20
Logic Circuit Supply Voltage, VDD -- V
VH Supply Undervoltage Negative
Going Threshold, VHUV(--) -- V
VH Supply Undervoltage Positive
Going Threshold, VHUV(+) -- V
min
--25
50
VHUV(--) -- Tc
11
8
6
--50
100
IT16482
typ
9
typ
150
Logic Circuit Supply Voltage, VDD -- V
125
max
10
200
0
10
VHUV(+) -- Tc
11
max
5
4
0
--50
250
Logic Circuit Supply Voltage, VDD -- V
125
VHIN=0V
VDD=15V
1
300
IT16480
IIN(--) -- Tc
5
VHIN=0V or VDD
350
100
VHIN=VDD=15V
60
IQDD -- VDD
400
IT16478
IIN(+) -- Tc
100
125
Logic "1" Input Bias Current, IIN(+) -- μA
250
Quiescent VDD Supply Current, IQDD -- μA
IQDD -- Tc
400
Logic "0" Input Bias Current, IIN(--) -- μA
Quiescent VDD Supply Current, IQDD -- μA
TND523SS
IT16483
10
max
9
typ
8
7
6
--50
min
--25
0
25
50
75
Case Temperature, Tc -- °C
100
125
IT16485
No.9005-6/8
TND523SS
VDDUV(+) -- Tc
VDD Supply Undervoltage Negative
Going Threshold, VDDUV(--) -- V
max
typ
9
8
min
7
6
--50
--25
0
25
50
75
100
Case Temperature, Tc -- °C
Output High Short Circuit
Pulsed Current, IO(+) -- mA
300
typ
min
100
0
10
12
14
16
18
Output High Short Circuit
Pulsed Current, IO(+) -- mA
0
--50
VHOUT=0V
VHIN=VIN
PW≤10μs
typ (VHS=15V
)
typ (VHS=10V)
100
--25
0
25
50
75
100
3
2
1.0
7
5
3
2
0
25
50
75
Case Temperature, Tc -- °C
100
125
IT16492
75
100
125
IT16487
typ
min
400
200
12
14
16
18
20
IT16489
IO(--) -- Tc
VHOUT=VHS
VHIN=0V
PW≤10μs
600
typ (V
HS =20V)
typ (V =15
HS
V)
400
typ (V 10
HS V)
200
0
--50
--25
0
25
50
75
100
Case Temperature, Tc -- °C
125
IT16491
PD -- Ta
0.4
10
7
5
50
600
IT16490
max
25
VHS -- V
dVS/dt -- Tc
--25
0
IO(--) -- VHS
0
10
125
3
2
0.1
--50
--25
VHOUT=VHS
VHIN=0V
PW≤10μs
Allowable Power Dissipation, PD -- W
Maximum Allowable Offset Voltage Supply,
dVS/dt -- V/ns
Case Temperature, Tc -- °C
100
7
5
min
800
typ (V
HS =20V)
200
7
IT16488
IO(+) -- Tc
300
typ
8
Case Temperature, Tc -- °C
20
VHS -- V
400
9
800
VHOUT=0V
VHIN=VIN
PW≤10μs
200
max
IT116486
IO(+) -- VHS
400
10
6
--50
125
Output Low Short Circuit
Pulsed Current, IO(--) -- mA
10
VDDUV(--) -- Tc
11
Output Low Short Circuit
Pulsed Current, IO(--) -- mA
VDD Supply Undervoltage Positive
Going Threshold, VDDUV(+) -- V
11
0.3
0.2
0.1
0
--40
--20
0
20
40
60
80
100
120
Ambient Temperature, Ta -- °C
140
160
IT16493
No.9005-7/8
TND523SS
PD -- Ta
Allowable Power Dissipation, PD -- W
1.4
When mounted on ceramic substrate
(1200mm2×0.8mm)
1.2
1.0
0.8
0.6
0.4
0.2
0
--40
--20
0
20
40
60
80
100
120
Ambient Temperature, Ta -- °C
140
160
IT16494
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not
be intended for use for any "special application" (medical equipment whose purpose is to sustain life,
aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal
system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten
human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they
grant any guarantee thereof. If you should intend to use our products for applications outside the standard
applications of our customer who is considering such use and/or outside the scope of our intended standard
applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the
intended use, our customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are
not guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an
independent device, the customer should always evaluate and test devices mounted in the customer' s
products or equipment.
SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using
products at values that exceed, even momentarily, rated values (such as maximum ratings, operating
condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor
Co.,Ltd. products described or contained herein.
SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all
semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures
or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give
rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment,
adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but
are not limited to protective circuits and error prevention circuits for safe design, redundant design, and
structural design.
In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are
controlled under any of applicable local export control laws and regulations, such products may require the
export license from the authorities concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system, or
otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the
SANYO Semiconductor Co.,Ltd. product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed
for volume production.
Upon using the technical information or products described herein, neither warranty nor license shall be
granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any
third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third
party's intellectual property rights which has resulted from the use of the technical information and products
mentioned above.
This catalog provides information as of June, 2011. Specifications and information herein are subject
to change without notice.
PS No.9005-8/8