SANYO UD1006FR_12

UD1006FR
Ordering number : ENA1745A
SANYO Semiconductors
DATA SHEET
UD1006FR
Diffused Junction Silicon Diode
Low VF Switching Diode
Features
•
•
VRRM=600V
trr=60ns(typ) (IF=0.5A, IR=1A)
•
•
VF=1.3V max (IF=10A)
Halogen free compliance
Specifications
Absolute Maximum Ratings at Ta=25°C
Parameter
Symbol
Repetitive Peak Reverse Voltage
Nonrepetitive Peak Reverse Surge Voltage
Average Output Current
Surge Forward Current
IO
IF(RMS)
IFSM
Junction Temperature
Tj
Storage Temperature
Tstg
R.M.S Forward Current
Conditions
Ratings
VRRM
VRSM
50Hz resistive load, Sine wave Tc=79°C
Tc=25°C (SANYO’s ideal heat dissipation condition) Package limited
Sine wave 10ms 1pulse
UD1006FR-H
--55 to +150
°C
15.87
6.68
3.3
3.23
2.76
12.98
0.8 MAX
15.8
UD1006
FR LOT No.
*
1
A
Marking
1.28
1.47 MAX
0.8
18
A
• Package
: TO-220F-2FS
• JEITA, JEDEC
: SC-67
• Minimum Packing Quantity : 50pcs./magazine
2.54
A
°C
Product & Package Information
4.7
V
10
150
unit : mm (typ)
7532-001
10.16
V
600
120
Package Dimensions
3.18
Unit
600
2
0.5
Electrical Connection
part is not a metal
* : This
but a resin
2
5.08
1 : Cathode
2 : Anode
SANYO : TO-220F-2FS
1
http://www.sanyosemi.com/en/network/
91212 TKIM/51910SA TKIM TC-00002308 No. A1745-1/5
UD1006FR
Electrical Characteristics at Ta=25°C
Parameter
Symbol
Reverse Voltage
VR
VF
IR
Forward Voltage
Reverse Current
Reverse Recovery Time
Thermal Resistance
Ratings
Conditions
min
IR=1mA
IF=10A
typ
Unit
max
600
V
1.1
trr1
VR=600V
IF=10A, di / dt=100A/μs
trr2
Rth(j-c)
IF=0.5A, IR=1A
Junction -Case : Smoothed DC
100
1.3
V
100
μA
150
ns
4.9
°C / W
60
ns
Ordering Information
Device
UD1006FR-H
Shipping
memo
50pcs./magazine
Pb Free and Halogen Free
IF -- VF
5
3
2
7
50°C
Capacitance, Cob -- pF
C
Forward Voltage, VF -- V
IFSM -- t
Surge Forward Current, IFSM(Peak) -- A
120
IS
20ms
t
110
100
90
80
70
2
3
5
7
0.1
2
100
2
3
Time, t -- s
5
7
1.0
2
3
IT14893
2
3
5 7 1.0
2
3
5 7 10
2
3
Reverse Voltage, VR -- V
IT14891
Current waveform 50Hz sine wave
60
0.01
3
5
0.1
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5
130
5
7
Transient Thermal Resistance Rth(j-c) -- °C / W
0
--40°
5°C
75°
C
0.1
7
5
3
2
25°C
1.0
7
5
3
2
0.01
7
5
3
2
0.001
Cob -- VR
1000
10
7
5
3
2
Ta=
12
Forward Current, IF -- A
Package
TO-220F-2FS
7
Rth(j-c) -- t
5 7 100
IT14892
5
3
2
1.0
7
5
3
0.001 2 3 5 70.01 2 3 5 7 0.1
2 3 5 7 1.0 2 3 5 7 10
Time, t -- s
2 3 5
IT14894
No. A1745-2/5
UD1006FR
Magazine Specification
UD1006FR-H
No. A1745-3/5
UD1006FR
Outline Drawing
UD1006FR-H
Mass (g) Unit
1.8
mm
* For reference
No. A1745-4/5
UD1006FR
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment. The products mentioned herein
shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life,
aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal
system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten
human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they
grant any guarantee thereof. If you should intend to use our products for new introduction or other application
different from current conditions on the usage of automotive device, communication device, office equipment,
industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.)
prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be
solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are
not guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an
independent device, the customer should always evaluate and test devices mounted in the customer' s
products or equipment.
SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using
products at values that exceed, even momentarily, rated values (such as maximum ratings, operating
condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor
Co.,Ltd. products described or contained herein.
Regarding monolithic semiconductors, if you should intend to use this IC continuously under high temperature,
high current, high voltage, or drastic temperature change, even if it is used within the range of absolute
maximum ratings or operating conditions, there is a possibility of decrease reliability. Please contact us for a
confirmation.
SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all
semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures
or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give
rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment,
adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but
are not limited to protective circuits and error prevention circuits for safe design, redundant design, and
structural design.
In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are
controlled under any of applicable local export control laws and regulations, such products may require the
export license from the authorities concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system, or
otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the
SANYO Semiconductor Co.,Ltd. product that you intend to use.
Upon using the technical information or products described herein, neither warranty nor license shall be
granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any
third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third
party's intellectual property rights which has resulted from the use of the technical information and products
mentioned above.
This catalog provides information as of September, 2012. Specifications and information herein are subject
to change without notice.
PS No. A1745-5/5