BUL416T High voltage fast-switching NPN power transistor Features ■ High voltage capability ■ Low spread of dynamic parameters ■ Very high switching speed Applications 3 ■ Electronic ballast for fluorescent lighting ■ Switch mode power supplies 1 2 TO-220 Description The BUL416T is an high voltage fast-switching NPN power transistor manufactured in planar technology with diffused collector. This device is designed for lighting and SMPS applications where high voltage capability is needed coupled with high switching speed. Table 1. Figure 1. Internal schematic diagram Device summary Order code Marking Package Packaging BUL416T BUL416T TO-220 Tube January 2011 Doc ID 16097 Rev 2 1/9 www.st.com 9 Electrical ratings 1 BUL416T Electrical ratings Table 2. Absolute maximum ratings Symbol Parameter Value Unit VCES Collector-emitter voltage (VBE = 0) 1600 V VCEO Collector-emitter voltage (IB = 0) 800 V VEBO Emitter-base voltage (IC = 0) 9 V Collector current 6 A Collector peak current (tP < 5 ms) 9 A Base current 5 A IBM Base peak current (tP < 5 ms) 8 A PTOT Total dissipation at Tc ≤ 25 °C 110 W TSTG Storage temperature - 65 to 150 °C 150 °C Value Unit IC ICM IB TJ Table 3. Symbol 2/9 Max. operating junction temperature Thermal data Parameter RthJC Thermal resistance junction-case max 1.14 °C/W RthJA Thermal resistance junction-ambient max 62.5 °C/W Doc ID 16097 Rev 2 BUL416T 2 Electrical characteristics Electrical characteristics Tcase = 25 °C unless otherwise specified. Table 4. Symbol Electrical characteristics Parameter Test conditions ICES Collector cut-off current (VBE = 0) VCE = 1600 V VCE = 1600 V ICEO Collector cut-off current (IB = 0) VCE = 800 V VCEO(sus) (1) Min. Typ. Tc = 125 °C Collector-emitter I =100 mA sustaining voltage (IB = 0) C Max. Unit 100 500 µA µA 250 µA 800 V 9 V Emitter-base voltage (IC = 0) IE = 10 mA VCE(sat) (1) Collector-emitter saturation voltage IC = 2 A IC = 4 A _ __ IB = 0.4 A IB = 1.33 A 1.2 1.5 V V VBE(sat) (1) Base-emitter saturation voltage IC = 2 A IC = 4 A _ _ _IB = 0.4 A IB = 1.33 A 1.2 1.5 V V DC current gain IC = 10 mA IC = 0.7 A Inductive load Storage time Fall time IC = 3 A VBE(off) = - 5 V VCL = 200 V VEBO hFE (1) ts tf VCE = 5 V VCE = 5 V IB1 = 1 A RBB = 0 L = 200 µH 10 18 32 1.8 800 µs ns 1. Pulse test: pulse duration ≤ 300 µs, duty cycle ≤ 2 %. Doc ID 16097 Rev 2 3/9 Electrical characteristics 2.1 BUL416T Test circuits Figure 2. Inductive load switching test circuit 1. Fast electronic switch 2. Non-inductive resistor 3. Fast recovery rectifier 4/9 Doc ID 16097 Rev 2 BUL416T 3 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. Doc ID 16097 Rev 2 5/9 Package mechanical data Table 5. BUL416T TO-220 type A mechanical data mm. Dim. Min. Typ. A 4.40 4.60 b 0.61 0.88 b1 1.14 1.70 c 0.48 0.70 D 15.25 15.75 D1 6/9 Max. 1.27 E 10 10.40 e 2.40 2.70 e1 4.95 5.15 F 1.23 1.32 H1 6.20 6.60 J1 2.40 2.72 L 13 14 L1 3.50 3.93 L20 16.40 L30 28.90 ∅P 3.75 3.85 Q 2.65 2.95 Doc ID 16097 Rev 2 BUL416T Package mechanical data Figure 3. TO-220 type A drawing 0015988_typeA_Rev_S Doc ID 16097 Rev 2 7/9 Revision history 4 BUL416T Revision history Table 6. 8/9 Document revision history Date Revision Changes 06-Aug-2009 1 Initial release. 25-Jan-2010 2 Document status promoted from preliminary data to datasheet. Doc ID 16097 Rev 2 BUL416T Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2011 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com Doc ID 16097 Rev 2 9/9