STMICROELECTRONICS WS57C45

WS57C45
MILITARY 2K x 8 REGISTERED CMOS PROM/RPROM
KEY FEATURES
• Ultra-Fast Access Time
• DESC SMD Nos. 5962-88735/5962-87529
• Pin Compatible with AM27S45 and
— 35 ns Setup
— 15 ns Clock to Output
CY7C245
• Immune to Latch-UP
• Low Power Consumption
• Fast Programming
• Programmable Synchronous or
— Up to 200 mA
• ESD Protection Exceeds 2000 Volts
• Programmable Asynchronous Initialize
Asynchronous Output Enable
Register
GENERAL DESCRIPTION
The WS57C45 is an extremely High Performance 16K UV Erasable Registered CMOS RPROM. It is a direct
drop-in replacement for such devices as the AM27S45 and CY7C245.
To meet the requirements of systems which execute and fetch instructions simultaneously, an 8-bit parallel data
register has been provided at the output which allows RPROM data to be stored while other data is being
addressed.
An asynchronous initialization feature has been provided which enables a user programmable 2049th word to be
placed on the outputs independent of the system clock. This feature can be used to force an initialize word or
provide a preset or clear function.
A further advantage of the WS57C45 over Bipolar PROM devices is the fact that it utilizes a proven EPROM
technology. This enables the entire memory array to be tested for switching characteristics and functionality after
assembly. Unlike devices which cannot be erased, every WS57C45 RPROM in a windowed package is 100%
tested with worst case test patterns both before and after assembly.
PIN CONFIGURATION
TOP VIEW
CERDIP
A7
A6
A5
A4
A3
A2
A1
A0
O0
O1
O2
GND
1
2
3
4
5
6
7
8
9
10
11
12
24
23
22
21
20
19
18
17
16
15
14
13
VCC
A8
A9
A10
INIT/VPP
OE/OES
CP/PGM
O7
O6
O5
O4
O3
PRODUCT SELECTION GUIDE
PARAMETER
WS57C45-35
WS57C45-45
Set Up Time (Max)
35 ns
45 ns
Clock to Output (Max)
15 ns
25 ns
Return to Main Menu
4-5
WS57C45
ORDERING INFORMATION
PART NUMBER
WS57C45-35TMB*
WS57C45-45KMB*
WS57C45-45TMB*
SPEED
(ns)
35
45
45
PACKAGE
TYPE
24 Pin CERDIP, 0.3"
24 Pin CERDIP, 0.3"
24 Pin CERDIP, 0.3"
OPERATING
WSI
PACKAGE TEMPERATURE MANUFACTURING
DRAWING
RANGE
PROCEDURE
T1
K1
T1
Military
Military
Military
MIL-STD-883C
MIL-STD-883C
MIL-STD-883C
NOTE: The actual part marking will not include the initials "WS."
*SMD product. See page 5-1 for DESC SMD numbers.
PROGRAMMING/ALGORITHMS/ERASURE/PROGRAMMERS
REFER TO
PAGE 5-1
The WS57C45 is programmed using Algorithm A shown on page 5-3.
For complete data sheet and electrical specifications see page 2-21.
Return to Main Menu
4-6