TSH190 Bipolar High Voltage Hall Effect Latch TO-92S Pin Definition: 1. VCC 2. GND 3. Output SOT-23 Pin Definition: 1. VCC 2. Output 3. GND Description TS190, Hall-Effect sensor, designed for electronic commutation of brush-less DC motor applications. The device includes an on-chip Hall voltage generator for magnetic sensing, a comparator that amplifies the Hall Voltage, and a Schmitt trigger to provide switching hysteresis for noise rejection, open collector output. An internal band gap regulator is used to provide temperature compensated supply voltage for internal circuits and allows a wide operating supply range. The device is identical except for magnetic switch points. A south pole of sufficient strength will turn the output on. The North Pole is necessary to turn the output off. An on-board regulator permits operation with supply voltages of 4V to 30 V. Features ● ● ● ● Ordering Information Optimized for BLDC motor applications High Peak Voltage of 65V o 100% tested at 125 C Temperature compensation function Part No. TSH190CT B0G TSH190CX RFG Package Packing TO-92S SOT-23 1Kpcs / Bulk Bag 3Kpcs / 7” Reel Note: “G” denote for Halogen Free Product Application ● ● ● ● ● ● High temperature Fan motor 3 phase BLDC motor application Fan motor application Speed sensing Revolution counting E-Bike Absolute Maximum Rating (Ta = 25oC unless otherwise noted) Characteristics Supply voltage Output Voltage Reverse voltage Magnetic flux density Output current Operating Temperature Range Storage temperature range Maximum Junction Temp Thermal Resistance - Junction to Ambient Thermal Resistance - Junction to Case Package Power Dissipation Note: Do not apply reverse voltage to VCC and VOUT Limit Value Unit VCC VOUT VCC/OUT 65 65 -32 Unlimited 25 V V V Gauss mA o C IOUT TOPR -40 to +125 o -55 to +150 TSTG C o 150 TJ C 206 TO-92S o θJA C/W 543 SOT-23 148 TO-92S o θJC C/W 410 SOT-23 606 TO-92S PD mW 230 SOT-23 Pin, It may be caused for Miss function or damaged device. 1/8 Version: B13 TSH190 Bipolar High Voltage Hall Effect Latch Block Diagram Typical Application Circuit C1：1000pF C2：15pF R1：10KΩ Electrical Specifications (DC Operating Parameters：TA=+25oC,VCC=12V) Parameters Supply Voltage Supply Current Output Saturation Voltage Output Leakage Current Output Rise Time Output Fall Time Test Conditions Operating B<BOP IOUT = 5mA, B>BOP IOFF B<BRP, VOUT = 24V RL=820Ω, CL =20pF RL=820Ω; CL =20pF 2/8 Min Typ Max Units 4 ------ -3 --1.5 1.5 30 8 500 10 --- V mA mV uA uS uS Version: B13 TSH190 Bipolar High Voltage Hall Effect Latch Magnetic Specifications Parameters Test Conditions Operate Point Release Point Hysteresis Min Typ Max Units 10 -110 -- --100 110 -10 -- Gauss Gauss Gauss Note: 1G (Gauss) = 0.1mT (millitesta) Output Behavior versus Magnetic Pole o DC Operating Parameters: TA = -40 to 125 C, VCC = 4 to 30V Parameter Package Test condition North pole TO-92S B>BOP South pole TO-92S B<BRP North pole SOT-23 B>BOP South pole SOT-23 B<BRP OUT Open Low Low Open TO-92S OUT=Open (Pull-up Voltage) SOT-23 OUT=Low (VDSon) OUT=Low (VDSon) 3/8 OUT=Open (Pull-up Voltage) Version: B13 TSH190 Bipolar High Voltage Hall Effect Latch Characteristic Performance Figure 1. Supply Voltage vs. Flux Density Figure 2. Temperature vs. Flux Density Figure 3. Supply Current vs. Temperature Figure 4. Supply Current vs. Supply Voltage Figure 5. Supply Voltage vs. Saturation Voltage Figure 6. Saturation Voltage vs. Temperature 4/8 Version: B13 TSH190 Bipolar High Voltage Hall Effect Latch Characteristic Performance Figure 7. Supply Voltage vs. Leakage Current Figure 8. Temperature vs. Power Dissipation 5/8 Version: B13 TSH190 Bipolar High Voltage Hall Effect Latch TO-92S Mechanical Drawing Unit: Millimeters Marking Diagram 190 Y WW = Device Code = Year Code = Week Code (01~52) 6/8 Version: B13 TSH190 Bipolar High Voltage Hall Effect Latch SOT-23 Mechanical Drawing Unit: Millimeters Marking Diagram 190 WW = Device Code = Week Code Table week code week code week code week code 1 OA 14 ON 27 PA 40 PN 2 OB 15 OO 28 PB 41 PO 3 OC 16 OP 29 PC 42 PP 4 OD 17 OQ 30 PD 43 PQ 7/8 5 OE 18 OR 31 PE 44 PR 6 OF 19 OS 32 PF 45 PS 7 OG 20 OT 33 PG 46 PT 8 OH 21 OU 34 PH 47 PU 9 OI 22 OV 35 PI 48 PV 10 OJ 23 OW 36 PJ 49 PW 11 OK 24 OX 37 PK 50 PX 12 OL 25 OY 38 PL 51 PY 13 OM 26 OZ 39 PM 52 PZ Version: B13 TSH190 Bipolar High Voltage Hall Effect Latch Notice Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, to any intellectual property rights is granted by this document. Except as provided in TSC’s terms and conditions of sale for such products, TSC assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of TSC products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify TSC for any damages resulting from such improper use or sale. 8/8 Version: B13