UNISONIC TECHNOLOGIES CO., LTD TIP42C PNP PLANAR TRANSISTOR PNP EPITAXIAL PLANAR TRANSISTOR DESCRIPTION The UTC TIP42C is a PNP epitaxial planar transistor, designed for using in general purpose amplifier and switching applications. FEATURES * Complement to TIP41C ORDERING INFORMATION Ordering Number Lead Free Halogen Free TIP42CL-TA3-T TIP42CG-TA3-T TIP42CL-TF3-T TIP42CG-TF3-T TIP42CL-TN3-R TIP42CG-TN3-R TIP42CL-TN3-T TIP42CG-TN3-T TIP42CL-TQ2-R TIP42CG-TQ2-R TIP42CL-TQ2-T TIP42CG-TQ2-T www.unisonic.com.tw Copyright © 2012 Unisonic Technologies Co., Ltd Package TO-220 TO-220F TO-252 TO-252 TO-263 TO-263 Pin Assignment 1 2 3 B C E B C E B C E B C E B C E B C E Packing Tube Tube Tape Reel Tube Tape Reel Tube 1 of 3 QW-R203-007.E TIP42C PNP PLANAR TRANSISTOR ABSOLUTE MAXIMUM RATING (unless otherwise specified ) PARAMETER Collector Base Voltage Collector to Emitter Voltage Emitter-Base Voltage Collector Current (DC) Collector Current (Pulse) Base Current RATINGS UNIT -100 V -100 V -5 V -6 A -10 A -2 A TO-220/TO-263 65 Collector Dissipation (TC=25°C) TO-220F PC 22 W TO-252 20 Junction Temperature TJ +150 °C Storage Temperature TSTG -65 ~ +150 °C Note Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. SYMBOL VCBO VCEO VEBO IC IC IB ELECTRICAL CHARACTERISTICS (TC=25°C) PARAMETER SYMBOL TEST CONDITIONS Collector-Emitter Breakdown Voltage (Note) BVCEO IC=-30mA, IB=0 Collector Cutoff Current ICEO VCE=-60V, IB=0 Collector Cutoff Current ICES VCE=-100V, VEB=0 Emitter Cutoff Current IEBO VBE=-5V, IC=0 Collector-Emitter Saturation Voltage (Note) VCE(SAT) IC=-6A, IB=-600mA Base-Emitter on Voltage (Note) VBE(ON) VCE=-4V, IC=-6A, VCE=-4V, IC=-300mA DC Current Gain (Note) hFE VCE=-4V, IC=-3A Current Gain Bandwidth Product fT VCE=-10V, IC=-500mA, f=1MHz Note: Pulse Test: PW≤300μs, Duty Cycle≤2% UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN -100 30 15 3 TYP MAX UNIT V -0.7 mA -400 μA -1 mA -1.5 V -2.0 V 75 MHz 2 of 3 QW-R203-007.E TIP42C DC Current Gain, hFE Saturation Voltage, VCE(SAT) VBE(SAT) TYPICAL CHARACTERISTICS Power Derating Collector Current, IC (A) s 20 1m 40 -5 -3 ms TO-220/TO-263 IC MAX (Pulse) s 60 Safe Operating Area 5m 80 -10 0.5 100 Collector Dissipation, PC (W) PNP PLANAR TRANSISTOR -1 -0.5 -0.3 TO-252 0 20 40 60 80 100 120140160180200 Case Temperature, TC (℃) -0.1 -1 -3 -5 -10 -30 -50 -100 Collector-Emitter Voltage, VCE (V) UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R203-007.E