1260 POWER INDUCTORS Outgassing Compliant Power Inductors AE590PNB ■ High current, low DCR shielded power inductors ■ Passes NASA low outgassing specifications ■ High temperature materials allow operation in ambient temperatures up to 165°C. ■ Tin-lead (Sn-Pb) terminations for the best possible board adhesion Core material Ferrite Terminations Tin-lead (63/37) over tin over nickel over phos bronze. Weight: 2.8 g – 3.3 g Ambient temperature –55°C to +105°C with Irms current, +105°C to +155°C with derated current Storage temperature Component: –55C to +155°C. Tape and reel packaging: –55°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Enhanced crush-resistant packaging 500/13″ reel; Plastic tape: 24 mm wide, 0.35 mm thick, 16 mm pocket spacing, 6.6 mm pocket depth 3 DCR (mOhms) 2 Inductance Part number1 (µH) typ max AE590PNB102NSZ 1.0 ±30% 5.8 6.5 AE590PNB152NSZ 1.5 ±30% 8.8 9.8 AE590PNB222NSZ 2.2 ±30% 11.5 12.8 AE590PNB332NSZ 3.3 ±30% 12.6 14.0 AE590PNB472MSZ 4.7 ±20% 13.9 15.5 AE590PNB562MSZ 5.6 ±20% 14.9 16.6 AE590PNB682MSZ 6.8 ±20% 16.6 18.5 AE590PNB822MSZ 8.2 ±20% 20.2 22.5 AE590PNB103MSZ 10 ±20% 21.5 23.9 AE590PNB123MSZ 12 ±20% 24.5 27.3 AE590PNB153MSZ 15 ±20% 30.7 34.2 AE590PNB183MSZ 18 ±20% 35.4 39.4 AE590PNB223MSZ 22 ±20% 36.6 40.7 AE590PNB273MSZ 27 ±20% 51.3 57.0 AE590PNB333MSZ 33 ±20% 54.9 61.0 AE590PNB393MSZ 39 ±20% 58.0 64.5 AE590PNB473MSZ 47 ±20% 80.1 89.0 AE590PNB563MSZ 56 ±20% 82.5 91.7 AE590PNB683MSZ 68 ±20% 94.5 105.0 AE590PNB823MSZ 82 ±20% 131.6 146.3 AE590PNB104MSZ 100 ±20% 141.8 157.6 AE590PNB124KSZ 120 ±10% 193.3 214.8 AE590PNB154KSZ 150 ±10% 215.4 239.4 AE590PNB184KSZ 180 ±10% 254.2 282.5 AE590PNB224KSZ 220 ±10% 314.1 349.0 AE590PNB274KSZ 270 ±10% 368.8 409.8 AE590PNB334KSZ 330 ±10% 481.3 534.8 AE590PNB394KSZ 390 ±10% 517.5 575.0 AE590PNB474KSZ 470 ±10% 721.2 801.4 AE590PNB564KSZ 560 ±10% 773.1 859.0 AE590PNB684KSZ 680 ±10% 867.6 964.0 AE590PNB824KSZ 820 ±10% 1158 1287 AE590PNB105KSZ 1000 ±10% 1273 1415 ® SRF 4 (MHz) min typ 70 100 56 80.0 39 55.0 29 42.0 27 38.0 21 30.0 19.0 27.0 18.0 26.0 15.0 22.0 14.0 20.0 12.6 18.0 11.2 16.0 10.5 15.0 9.0 13.0 8.7 12.4 8.4 12.0 8.0 11.6 7.3 10.5 7.0 10.0 6.0 8.6 5.5 7.8 4.8 6.8 4.5 6.4 4.3 6.1 3.9 5.5 3.0 4.3 2.8 4.0 2.5 3.6 2.1 3.0 2.0 2.8 1.8 2.6 1.7 2.5 1.6 2.4 (A)5 Irms (A)6 10% 20% 30% 20°C40°C dropdropdropriserise 19.1221.1822.76 6.00 8.00 14.4416.4017.64 5.30 7.60 12.3214.0015.08 5.20 7.30 10.8812.2213.12 5.00 7.00 9.9211.1012.00 4.50 7.00 8.54 9.6010.38 4.00 6.40 7.80 8.80 9.44 3.80 5.90 6.44 7.38 7.98 3.40 4.80 6.00 6.92 7.48 3.00 4.00 5.68 6.56 7.08 2.80 3.70 5.34 6.04 6.54 2.60 3.50 4.82 5.54 6.00 2.50 3.30 4.42 5.04 5.44 2.30 3.10 3.78 4.32 4.68 2.10 2.90 3.50 4.00 4.34 2.00 2.70 3.32 3.80 4.14 1.90 2.60 2.84 3.26 3.54 1.85 2.50 2.64 3.04 3.28 1.75 2.40 2.46 2.82 3.04 1.70 2.30 2.24 2.54 2.74 1.60 2.20 2.06 2.34 2.54 1.50 2.10 1.84 2.08 2.28 1.38 1.85 1.64 1.90 2.06 1.20 1.66 1.46 1.70 1.84 1.14 1.58 1.30 1.48 1.60 1.00 1.42 1.18 1.38 1.48 0.90 1.45 1.04 1.20 1.30 0.84 1.16 1.00 1.16 1.28 0.78 1.08 0.906 1.00 1.10 0.70 0.96 0.872 0.980 1.02 0.64 0.88 0.782 0.886 0.956 0.58 0.80 0.692 0.784 0.854 0.53 0.73 0.588 0.672 0.726 0.48 0.68 Isat AE590PNB824KSZ Testing:Z=COTS H=Screening per Coilcraft CP‑SA‑10001 N =Screening per Coilcraft CP‑SA‑10004 2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP 4263B LCR meter or equivalent. 3. DCR measured on a micro-ohmmeter and a Coilcraft CCF858 test fixture. 4. SRF measured using an Agilent/HP 8753D network analyzer. 5. DC current at which the inductance drops the specified amount from its value without current. 6. Current that causes the specified temperature rise from 25°C ambient. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Specifications subject to change without notice. Please check our website for latest information. 1102 Silver Lake Road Cary IL 60013 © Coilcraft, Inc. 2011 1. When ordering, please specify testing code: Document AE599-1 Revised 07/22/11 Phone 800-981-0363 Fax 847-639-1508 E-mail [email protected] Web www.coilcraft-cps.com 1260 POWER INDUCTORS AE590PNB Series Typical L vs Frequency Typical L vs Current 10000 10000 1000 µH 100 µH 100 10 µH 10 1 µH 1 0.1 0.01 1000 µH 1000 Inductance (µH) Inductance (µH) 1000 100 µH 100 10 µH 10 1 µH 1 1 0.1 10 0.1 0.1 10 1 Frequency (MHz) 100 Current (A) Current Derating 120 100 90 80 70 60 50 40 25°C Percent of rated Current 110 30 20 10 0 -55 -40 Isat Irms -20 0 20 40 60 80 100 120 140 160 Ambient temperature (°C) Dimensions are in ® Specifications subject to change without notice. Please check our website for latest information. 1102 Silver Lake Road Cary IL 60013 © Coilcraft, Inc. 2011 inches mm Document AE599-2 Revised 07/22/11 Phone 800-981-0363 Fax 847-639-1508 E-mail [email protected] Web www.coilcraft-cps.com