1260 POWER INDUCTORS High Reliability Power Inductors MS590PNB ■ High current, low DCR shielded power inductors ■ High temperature materials allow operation in ambient temperatures up to 165°C. ■ Tin-lead (Sn-Pb) terminations for the best possible board adhesion Core material Ferrite Terminations Tin-lead (63/37) over tin over nickel over phos bronze. Weight: 2.8 g – 3.3 g Ambient temperature –55°C to +105°C with Irms current, +105°C to +155°C with derated current Storage temperature Component: –55C to +155°C. Tape and reel packaging: –55°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Enhanced crush-resistant packaging 500/13″ reel; Plastic tape: 24 mm wide, 0.35 mm thick, 16 mm pocket spacing, 6.6 mm pocket depth 3 DCR (mOhms) 2 Inductance Part number1 (µH) typ max MS590PNB102NSZ 1.0 ±30% 5.8 6.5 MS590PNB152NSZ 1.5 ±30% 8.8 9.8 MS590PNB222NSZ 2.2 ±30% 11.5 12.8 MS590PNB332NSZ 3.3 ±30% 12.6 14.0 MS590PNB472MSZ 4.7 ±20% 13.9 15.5 MS590PNB562MSZ 5.6 ±20% 14.9 16.6 MS590PNB682MSZ 6.8 ±20% 16.6 18.5 MS590PNB822MSZ 8.2 ±20% 20.2 22.5 MS590PNB103MSZ 10 ±20% 21.5 23.9 MS590PNB123MSZ 12 ±20% 24.5 27.3 MS590PNB153MSZ 15 ±20% 30.7 34.2 MS590PNB183MSZ 18 ±20% 35.4 39.4 MS590PNB223MSZ 22 ±20% 36.6 40.7 MS590PNB273MSZ 27 ±20% 51.3 57.0 MS590PNB333MSZ 33 ±20% 54.9 61.0 MS590PNB393MSZ 39 ±20% 58.0 64.5 MS590PNB473MSZ 47 ±20% 80.1 89.0 MS590PNB563MSZ 56 ±20% 82.5 91.7 MS590PNB683MSZ 68 ±20% 94.5 105.0 MS590PNB823MSZ 82 ±20% 131.6 146.3 MS590PNB104MSZ 100 ±20% 141.8 157.6 MS590PNB124KSZ 120 ±10% 193.3 214.8 MS590PNB154KSZ 150 ±10% 215.4 239.4 MS590PNB184KSZ 180 ±10% 254.2 282.5 MS590PNB224KSZ 220 ±10% 314.1 349.0 MS590PNB274KSZ 270 ±10% 368.8 409.8 MS590PNB334KSZ 330 ±10% 481.3 534.8 MS590PNB394KSZ 390 ±10% 517.5 575.0 MS590PNB474KSZ 470 ±10% 721.2 801.4 MS590PNB564KSZ 560 ±10% 773.1 859.0 MS590PNB684KSZ 680 ±10% 867.6 964.0 MS590PNB824KSZ 820 ±10% 1158 1287 MS590PNB105KSZ 1000 ±10% 1273 1415 ® SRF 4 (MHz) min typ 70 100 56 80.0 39 55.0 29 42.0 27 38.0 21 30.0 19.0 27.0 18.0 26.0 15.0 22.0 14.0 20.0 12.6 18.0 11.2 16.0 10.5 15.0 9.0 13.0 8.7 12.4 8.4 12.0 8.0 11.6 7.3 10.5 7.0 10.0 6.0 8.6 5.5 7.8 4.8 6.8 4.5 6.4 4.3 6.1 3.9 5.5 3.0 4.3 2.8 4.0 2.5 3.6 2.1 3.0 2.0 2.8 1.8 2.6 1.7 2.5 1.6 2.4 (A)5 Irms (A)6 10% 20% 30% 20°C40°C dropdropdropriserise 19.1221.1822.76 6.00 8.00 14.4416.4017.64 5.30 7.60 12.3214.0015.08 5.20 7.30 10.8812.2213.12 5.00 7.00 9.9211.1012.00 4.50 7.00 8.54 9.6010.38 4.00 6.40 7.80 8.80 9.44 3.80 5.90 6.44 7.38 7.98 3.40 4.80 6.00 6.92 7.48 3.00 4.00 5.68 6.56 7.08 2.80 3.70 5.34 6.04 6.54 2.60 3.50 4.82 5.54 6.00 2.50 3.30 4.42 5.04 5.44 2.30 3.10 3.78 4.32 4.68 2.10 2.90 3.50 4.00 4.34 2.00 2.70 3.32 3.80 4.14 1.90 2.60 2.84 3.26 3.54 1.85 2.50 2.64 3.04 3.28 1.75 2.40 2.46 2.82 3.04 1.70 2.30 2.24 2.54 2.74 1.60 2.20 2.06 2.34 2.54 1.50 2.10 1.84 2.08 2.28 1.38 1.85 1.64 1.90 2.06 1.20 1.66 1.46 1.70 1.84 1.14 1.58 1.30 1.48 1.60 1.00 1.42 1.18 1.38 1.48 0.90 1.45 1.04 1.20 1.30 0.84 1.16 1.00 1.16 1.28 0.78 1.08 0.906 1.00 1.10 0.70 0.96 0.872 0.980 1.02 0.64 0.88 0.782 0.886 0.956 0.58 0.80 0.692 0.784 0.854 0.53 0.73 0.588 0.672 0.726 0.48 0.68 Isat MS590PNB824KSZ Testing:Z=COTS H=Screening per Coilcraft CP‑SA‑10001 N =Screening per Coilcraft CP‑SA‑10004 2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP 4263B LCR meter or equivalent. 3. DCR measured on a micro-ohmmeter and a Coilcraft CCF858 test fixture. 4. SRF measured using an Agilent/HP 8753D network analyzer. 5. DC current at which the inductance drops the specified amount from its value without current. 6. Current that causes the specified temperature rise from 25°C ambient. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Specifications subject to change without notice. Please check our website for latest information. 1102 Silver Lake Road Cary IL 60013 © Coilcraft, Inc. 2011 1. When ordering, please specify testing code: Document MS599-1 Revised 09/19/11 Phone 800-981-0363 Fax 847-639-1508 E-mail [email protected] Web www.coilcraft-cps.com 1260 POWER INDUCTORS MS590PNB Series Typical L vs Frequency Typical L vs Current 10000 10000 1000 µH 100 µH 100 10 µH 10 1 µH 1 0.1 0.01 1000 µH 1000 Inductance (µH) Inductance (µH) 1000 100 µH 100 10 µH 10 1 µH 1 1 0.1 10 0.1 0.1 10 1 Frequency (MHz) 100 Current (A) Current Derating 120 100 90 80 70 60 50 40 25°C Percent of rated Current 110 30 20 10 0 -55 -40 Isat Irms -20 0 20 40 60 80 100 120 140 160 Ambient temperature (°C) Dimensions are in ® Specifications subject to change without notice. Please check our website for latest information. 1102 Silver Lake Road Cary IL 60013 © Coilcraft, Inc. 2011 inches mm Document MS599-2 Revised 09/19/11 Phone 800-981-0363 Fax 847-639-1508 E-mail [email protected] Web www.coilcraft-cps.com