General Purpose Relays PCB Relays Potter & Brumfield Power PCB Relay RT1 n1 pole 12A/16A, 1 form C (CO) or 1 form A (NO) contact coil 400mW n5kV/10mm coil-contact, reinforced insulation nAmbient temperature 85°C nSensitive Typical applications Boiler control, timers, garage door control, POS automation, interface modules VZb Approvals Contact Data (continued) Technical data of approved types on request Contact ratings Type Load RT3, RTD 1 HP @ 480VAC* motor RT3, RTD 1 HP @ 240VAC* motor RT3, RTD 1/2 HP @ 120VAC* motor RT3, RTD 60 LRA/10 FLA @ 250VAC* motor RT3, RTD TV-5 @ 120VAC* Tungsten RT3, RTD A300, 720VA @ 240VAC* Pilot Duty RT3, RTD B300, 360VA @ 240VAC** Pilot Duty VDE REG.-Nr. 6106, UL E214025, cCSAus 14385 Contact Data 12A 16A Contact arrangement 1 form C (CO) or 1 form A (NO) Rated voltage 250VAC Max. switching voltage 400VAC Rated current 12A 16A Limiting continuous current 12A 16A, UL: 20A Limiting making current max. 4s, duty factor 10% 25A 30A Breaking capacity max. 3000VA 4000VA Contact Material AgNi 90/10 Frequency of operation, with/without load 360/72000h-1 Operate/release time max., DC coil 8/6ms Bounce time max., DC coil, form A/form B 4/6ms Contact ratings Type Contact Load Cycles IEC 61810 RT314 DC-coil A (NO) 16A, 250VAC, cosφ=1, 85°C 30x103 RT314 DC-coil C (CO) 16A, 250VAC, cosφ=1, 85°C 10x103 RT314 DC-coil A (NO) 10A, 400VAC, cosφ=1, 85°C 150x103 RT114 DC-coil A (NO) 12A, 250VAC, cosφ=1, 85°C 50x103 RT114 AC-coil A (NO) 12A, 250VAC, cosφ=1, 70°C 100x103 UL 508 RT314 A/B (NO/NC) 20A, 250VAC, general purpose, 85°C 6x103 RT334 A (NO) 16A, 250VAC, gen. purpose, 85°C 50x103 RT314 A (NO) 1hp, 240VAC, 40°C 1x103 EN60947-5-1 RT314 DC-coil A/B (NO/NC) 2A, 24VDC, DC13 6.050 EN60730-1 RT314 DC-coil A (NO) 12(2)A, 250VAC, 85°C 100x103 04-2011, Rev. 0411 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Cycles 6x103 6x103 6x103 30x103 25x103 30x103 30x103 *) form A (NO) contact only, **) form B (NC) contact only Mechanical endurance >30x106 operations Coil Data Coil voltage range Operative range, IEC 61810 Coil insulation system according UL Coil versions, DC coil Coil Rated Operate code voltage voltage VDC VDC 005 5 3.5 006 6 4.2 009 9 6.3 012 12 8.4 024 24 16.8 048 48 33.6 5 to 110VDC 2 class F Release voltage VDC 0.5 0.6 0.9 1.2 2.4 4.8 Coil resistance Ω±10% 62 90 200 360 1440 5520 Rated coil power mW 403 400 400 400 400 417 All figures are given for coil without pre-energization, at ambient temperature +23°C. Other coil voltages on request. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 1 General Purpose Relays PCB Relays Potter & Brumfield Power PCB Relay RT1 (Continued) Insulation Data Other Data (contiinued) Initial dielectric strength between open contacts between contact and coil Clearance/creepage between contact and coil Material group of insulation parts Tracking index of relay base 1000Vrms 5000Vrms ≥10/10mm IIIa PTI 250V Terminal type PCB-THT, plug-in Weight 14g Resistance to soldering heat THT, IEC 60068-2-20 RTII 270°C/10s RTIII 260°C/5s Packaging/unit tube/20 pcs., box/500 pcs. Accessories Other Data Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Ambient temperature -40 to 85°C Category of environmental protection IEC 61810RTII - flux proof, RTIII - wash tight Vibration resistance (functional) form A/form B contact, 30 to 500Hz 20g/5g Shock resistance (destructive) 100g For details see datasheet Accessories Industrial Power Relay RT NOTE: indicated contact ratings and electrical endurance data for direct wiring of relays (according IEC 61810-1); for relays mounted on sockets deratings may apply. Dimensions S0272-BB PCB layout / terminal assignment *) With the recommended PCB hole sizes a grid pattern from 2.5mm to 2.54mm can be used. Bottom view on solder pins 12A, pinning 3.5mm 12A, pinning 5mm S0418-CB 1 form C (CO) contact S0418-CN 1 form C (CO) contact S0163-BG 1 form A (NO) contact 04-2011, Rev. 0411 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company S0418-CA 1 form C (CO) contact S0163-BC 1 form A (NO) contact S0163-BH 2 16A, pinning 5mm Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. S0163-BE 1 form A (NO) contact S0163-BD Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions S0163-BF Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. General Purpose Relays PCB Relays Potter & Brumfield Power PCB Relay RT1 (Continued) Product code structure Typical product code Type RT Power PCB Relay RT1 Version 1 12A, pinning 3.5mm, flux proof 2 12A, pinning 5mm, flux proof *) 3 16A, pinning 5mm, flux proof B 12A, pinning 3.5mm, wash tight D 16A, pinning 5mm, wash tight Contact arrangement 1 1 form C (CO) contact 3 1 form A (NO) contact Contact material 4 AgNi 90/10 Coil Coil code: please refer to coil versions table Version F Standard version Product code Version Contacts Contact material RT114012F 12A, pinning 3.5mm, 1 form C (CO) AgNi 90/10 RT114024F flux proof contact RT134012F 1 form A (NO) RT134024F contact RT314005F 16A, pinning 5mm, 1 form C (CO) RT314012F flux proof contact RT314024F RT334012F 1 form A (NO) RT334024F contact RTB14005F 12A, pinning 3.5mm, 1 form C (CO) RTB14012F wash tight contact RTB14024F RTB34012F 1 form A (NO) RTD14005F 16A, pinning 3.5mm, 1 form C (CO) RTD14012F wash tight contact RTD14024F RTD34012F 1 form A (NO) RTD34024F contact This list represents the most common types and does not show all variants covered by this datasheet. Other types on request 04-2011, Rev. 0411 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. RT 3 1 Coil 12VDC 24VDC 12VDC 24VDC 5VDC 12VDC 24VDC 12VDC 24VDC 5VDC 12VDC 24VDC 12VDC 5VDC 12VDC 24VDC 12VDC 24VDC Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions 4 024 F Part number 1419108-2 1419108-3 5-1415020-1 2-1393242-1 1419108-8 2-1393237-2 2-1393237-3 2-1393237-5 2-1393237-7 2-1419108-4 2-1419108-5 2-1419108-6 2-1419108-7 2-1419108-8 2-1419108-9 3-1419108-1 3-1419108-6 3-1419108-9 Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 3