MACOM 2-1393203-9

General Purpose Relays
PCB Relays
SCHRACK
Power PCB Relay U/UB
n1
pole 7A, mono or bistable
form C (CO) or 1 form A (NO) or 1 form B (NC) contact
nBistable and DC version
nWash tight version
nVersion for 10A on request
n1
Typical applications
Heating control, installation, battery powered equipment
F0153-C
Z
Approvals
Coil Data
UL E214024
Technical data of approved types on request
Contact Data
Standard Bistable Sensitive
Contact arrangement
1 form C (CO) or
1 form A (NO) or
1 form B (NC)
Rated voltage
250VAC
Max. switching voltage
400VAC
Rated current
7A
7A
5A
Limiting making current,
max 4 s, duty factor 10%
12A
12A
12A
Breaking capacity max.
1750VA
1750VA
1250VA
Contact material
AgNi 90/10 AgNi 90/10 AgNi 90/10
Frequency of operation,
with/without load
600/18000h-1
Operate/release time typ.
5/ 3 ms
-
7/3 ms
Set/reset time typ.
-
5/ 3 ms
Bounce time typ., form A/form B
2/10ms
2/10ms
2/10ms
Contact ratings
Type Contact Load UL 508
U/UB C/A/B
(CO/NO/NC) 7A, 250VAC,general purpose, 40°C Mechanical endurance, DC coil
Cycles
Coil voltage range
Operative range IEC 61810
Reset voltage min.,
% of rated coil voltage
Reset voltage max.,
% of rated coil voltage
Rated operate power
Standard Bistable Sensitive
6 to 48 VDC 6 to 48 VDC 6 to 48 VDC
2
2
2
-
25%
-
-
45%
- 900 to 1300 mW/20ms -
Coil versions, DC coil
Coil
Rated
Operate
Release
Coil
Rated coil
code
voltage
voltage
voltage
resistance
power
VDC
VDC
VDC
Ω±10%
mW
Standard coil
003
6
4.2
0.6
80
450
005
12
8.4
1.2
320
450
007
24
16.8
2.4
1280
450
008
48
33.6
4.8
3800
606
Sensitive coil
103
6
4.4
0.6
110
327
105
12
8.8
1.2
440
327
107
24
17.5
2.4
1780
324
108
48
35.0
4.8
4000
576
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Other coil voltages on request.
6.000
>20x106 operations
Coil versions, bistable 1 coil
Coil
Rated
Set
Reset
Coil
code
voltage
voltage
voltage
resistance
VDC
VDC
VDC
Ω±10%
003
6
4.7
1.5
33
005
12
9.4
3.0
119
007
24
18.7
6.0
475
008
48
37.4
12.0
1750
Rated coil
power
mW
1091
1210
1213
1317
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Other coil voltages on request.
04-2011, Rev. 0411
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ section, application notes and all specifications
are subject to change.
1
General Purpose Relays
PCB Relays
SCHRACK
Power PCB Relay U/UB (Continued)
Insulation Data
Initial dielectric strength
between open contacts
between contact and coil
Clearance/creepage
between contact and coil
Material group of insulation parts
2kVrms
Version
V23148-*0***
4kVrms
Version
V23148-*1***
PCB layout / terminal assignment
1000Vrms
2000Vrms
1000Vrms
4000Vrms
Monostable and bistable 1 coil
≥2.5/2.5mm
≥IIIa
≥3.5/3.5mm
≥IIIa
Bottom view on solder pins
Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature
-25 to +70°C
Category of environmental protection
IEC 61810
RTIII - wash tight
Vibration resistance (functional), form A/form B
10/10g
Shock resistance (functional), form A/form B
10/10g
Terminal type
PCB-THT
Weight
9.5 g
Resistance to soldering heat THT
IEC 60068-2-20, wash tight version
260°C/5 s
Packaging unit
25 pcs.
S0285-AA
Form C contact (CO)
S0285-AB
Form A contact (NO)
S0285-AC
Form B contact (NC)
S0285-AD
Dimensions
S0286-A
2
04-2011, Rev. 0411
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ section, application notes and all specifications
are subject to change.
General Purpose Relays
PCB Relays
SCHRACK
Power PCB Relay U/UB (Continued)
Product code structure
Typical product code V23148
-A
0
0
07
-A
101
Type
V23148 Power PCB Relay U/UB
Version
A Monostable (Miniature power relay U)
B Bistable (Miniature power relay UB, remanence version)
Dielectric strength coil-contact
0 2kVrms
1 4kVrms
Version
Monostable
Bistable
0 Standard
0 Standard
1 Sensitive
Coil
03 6VDC
07 24VDC
05 12VDC
08 48VDC
Contact configuration
A 1 form C contact (1 CO)
C 1 form B contact (1 NC)
B 1 form A contact (1 NO)
Contact material
101 AgNi10
Other types on request
Product code
Version
Dielectric
Version
Arrangement
V23148-A0003-A101
Monostable
2000 Vrms
Standard
1 form C (CO)
V23148-A0003-B101
relay ‚U‘
contact-coil
1 form A (NO)
V23148-A0005-A101
AgNi10
1 form C (CO)
V23148-A0005-B101
1 form A (NO)
V23148-A0007-A101
1 form C (CO)
V23148-A0007-B101
1 form A (NO)
V23148-A0008-A101
1 form C (CO)
V23148-A0105-A101
Sensitive
V23148-A0107-A101
V23148-A1005-A101
4000 Vrms
Standard
V23148-A1007-A101
contact-coil
V23148-A1105-A101
Sensitive
V23148-A1107-A101
V23148-B0003-A101
Bistable
2000 Vrms
Standard
V23148-B0005-A101
relay ‚UB‘
contact-coil
V23148-B0007-A101
AgNi10
V23148-B0008-A101
04-2011, Rev. 0411
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Part number
1393203-4
1393203-5
1393203-8
1393203-9
1-1393203-1
1-1393203-2
1-1393203-4
2-1393203-1
2-1393203-4
2-1393203-7
2-1393203-8
2-1393203-9
3-1393203-1
1393204-4
1393204-7
1-1393204-0
1-1393204-3
Datasheets, product data, ‘Definitions’ section, application notes and all specifications
are subject to change.
3