General Purpose Relays PCB Relays SCHRACK Power PCB Relay RTH 105°C 16A n1 pole 16A, 1 form C (CO) or 1 form A (NO) contact temperature 105°C nSensitive coil 400mW n5kV/10mm coil-contact nReinforced insulation nWG version: Product in accordance to IEC 60335-1 nAmbient Typical applications Oven control, cooking plate control VZb Approvals Coil Data VDE REG.-Nr. 6106, UL E214025, cCSAus 14385 Coil voltage range Operative range, IEC 61810 Coil insulation system according UL1446 Technical data of approved types on request Contact Data Contact arrangement 1 form C (CO) or 1 form A (NO) Rated voltage 250VAC Max. switching voltage 400VAC Rated current 16A1) Limiting continuous current, form A/form B 16 / 26A Limiting making current (form A contact) max. 4 s, duty factor 10 % 30A Breaking capacity max. 4000VA Contact material AgNi 90/10 Frequency of operation, with/without load 360/72000h-1 Operate/release time max. 8/6ms Bounce time max., form A/form B 4/6ms Contact ratings Type Contact IEC 61810 RTH14 A (NO) RTH14 C (CO) RTH14 B (NC) RTH34 A (NO) RTHH4 A (NO) UL 508 RTH14 A/B (NO/NC) RTH34 A (NO) Load F0220-D 5 to 60VDC 90...110% URTD class F Coil versions, DC coil Coil Rated Operate Release code voltage voltage voltage VDC VDC VDC 009 9 6.3 0.9 012 12 8.4 1.2 024 24 16.8 2.4 Coil resistance Ω±10% 203 360 1440 Rated coil power mW 3991) 4001) 4001) 1) Continuous thermal load > 10 A at 105°C requires reduction of coil power to 64% of rated power after 100ms. All figures are given for coil without pre-energization, at ambient temperature +23°C. Other coil voltages on request. Cycles 10A, 250VAC resistive,105°C 16A, 250VAC resistive, 105°C 26A, 250VAC resistive, 85°C 10A, 400VAC resistive, 105°C 10A, 250VAC resistive, 105°C 150x103 10x103 500 150x103 250x103 16A, 250VAC, resistive, 105°C 30x103 20A, 250VAC, general purpose, 105°C 6x103 Mechanical endurance >30x106 operations 1) Continuous thermal load >10A at 105°C requires reduction of coil power to 64% of rated power after 100ms Insulation Data Initial dielectric strength between open contacts between contact and coil Clearance/creepage between contact and coil Material group of insulation parts Tracking index of relay base 04-2011, Rev. 0411 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions 1000Vrms 5000Vrms ≥10/10mm IIIa PTI250V Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 1 General Purpose Relays PCB Relays SCHRACK Power PCB Relay RTH 105°C 16A (Continued) Other Data Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Resistance to heat and fire WG version according EN 60335-1, par.30 Ambient temperature -40 to 105°C Category of environmental protection IEC 61810 RTII - flux proof Vibration resistance (functional) form A/form B contact, 30 to 150Hz 20/5g Shock resistance (destructive) 100g Terminal type PCB-THT Weight 14g Resistance to soldering heat THT IEC 60068-2-20 270°C/10s Packaging/unit tube/20 pcs., box/500 pcs. PCB layout / terminal assignment Bottom view on solder pins 16A, pinning 5mm S0418-CA *) With the recommended PCB hole sizes a grid pattern from 2.5mm to 2.54mm can be used. 1 form C (CO) contact Dimensions S0163-BE 1 form A (NO) contact S0163-BF S0272-BA Product code structure Typical product code RT H 3 4 012 WG Type RT Power PCB Relay RTH 105°C 16A Version H 16A, pinning 5mm, 105°C Contact configuration 1 1 form C (CO) contact 3 1 form A (NO) contact H 1 form A (NO) contact „High Performance“ Contact material 4 AgNi 90/10 Coil Coil code: please refer to coil versions table Version Blank Standard version WG Product in accordance with IEC 60335-1 (domestic appliances) Product code Version Contact configuration Contact Material Coil RTH14012 16A, 105°C 1 form C (CO) AgNi 90/10 12VDC RTH14012WG contact RTH14024WG 24VDC RTH34012 1 form A (NO) 12VDC RTH34012WG contact RTH34024 24VDC RTH34024WG RTHH4009WG 16A, 105°C, 9VDC RTHH4012 High Performance 12VDC RTHH4012WG RTHH4024 24VDC This list represents the most common types and does not show all variants covered by this datasheet. Other types on request 2 04-2011, Rev. 0411 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Part number 8-1415006-1 1-1415538-1 9-1415535-4 9-1415006-1 1-1415536-9 1415039-1 2-1415536-0 1-1415540-6 8-1415047-1 4-1415536-2 9-1415047-1 Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change.