General Purpose Relays PCB Relays SCHRACK Power PCB Relay RT1 Inrush Power n1 pole 16A, 1 form A (NO) contact (W pre-make contact + AgSnO2) making and breaking capacity acc. to IEC 60669-1 n165A/20ms inrush peak current nMono- or bistable coil n5kV/10mm coil-contact nReinforced insulation nTest tab (manual operator) optional n10A/250VAC Typical applications Lighting systems, movement sensors, filament and incandescent lamp loads, motors F0272-B VZb Approvals Contact Data (continued) Technical data of approved types on request Mechanical endurance DC coil bistable version tab manually operated VDE REG.-Nr. 6106,UL E214025, cCSAus 14385 Contact Data RT.3T RTS3L Contact arrangement 1 form A (NO) contact Rated voltage 250VAC Max. switching voltage 400VAC Rated current 16A Limiting continuous current 16A, UL: 20A (RTS3L) Limiting making current, max. 20ms (incand. lamps) 165A 120A max. 200µs (flourescent lamps) 800A Breaking capacity max. 4000VA Contact material W (pre-make cont.) AgSnO2 +AgSnO2 Contact style pre-make contact single contact Frequency of operation, with/without load 360/3600h-1 Operate/release time max., DC coil 10/5ms Operate/Reset time max., bistable version 10/10ms Bounce time max. 4ms Contact ratings Type Contact Load IEC 61810 RTS3L A (NO) 20A, 250VAC resistive, 70°C RTS3L monostable A (NO) 16A, 250VAC resistive, 85°C RTS3T A (NO) 16A, 250VAC resistive, 85°C UL 508 RTS3L A (NO) 20A, 250VAC, general purpose, 70°C RTS3L A (NO) 16A, 250VAC, resistive, 85°C RTS3L A (NO) TV8, 240VAC, 40°C RTS3L A (NO) 1.5hp, 240VAC, 70°C RTS3T A (NO) 1200W Tungsten, 120VAC/277VAC, 60Hz, 50°C RTS3T A (NO) 620W Discharge lamps (standard ballast), 120VAC/277VAC, 60Hz, 50°C Cycles 20x103 100x103 5x103 >5x106 ops. >3x106 ops. >1x103 ops. >10x106 ops. >5x106 ops. - Coil Data, monostable DC coil Coil voltage range Operative range, IEC 61810 Coil insulation system according UL1446 5 to 110VDC 2 class F Coil versions, monostable DC coil Coil Rated Operate Release code voltage voltage voltage VDC VDC VDC 005 5 3.5 0.5 006 6 4.2 0.6 012 12 8.4 1.2 024 24 16.8 2.4 048 48 33.6 4.8 060 60 42.0 6.0 110 110 77.0 11.0 Coil resistance Ω±10%1) 62 90 360 1440 5520 85701) 288001) Rated coil power mW 403 400 400 400 417 420 420 1) Coil resistance ±12%. All figures are given for coil without pre-energization, at ambient temperature +23°C. Other coil voltages on request. 20x103 50x103 25x103 30x103 6x103 6x103 Coil Data, bistable coils 1 coil 2 coils Magnetic system polarized, bistable Coil voltage range 3 to 24VDC Operative range, IEC 61810 2 Limiting voltage, % of rated coil voltage 120% 150% Min./Max. energization duration30ms/1min at <10% duty factor Coil insulation system according UL1446 class F 04-2011, Rev. 0411 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 1 General Purpose Relays PCB Relays SCHRACK Power PCB Relay RT1 Inrush Power (Continued) Coil Data (continued) Other Data Coil versions, bistable Coil Rated Set Reset code voltage voltage voltage VDC VDC VDC Coil versions, bistable 1 coil A03 3 2.1 1.7 A12 12 8.4 6.6 A24 24 16.8 13.2 Coil versions, bistable 2 coils F03 3 2.1 1.7 F12 12 8.4 6.6 F24 24 16.8 13.2 Coil resistance Ω±10% Rated coil power mW 21 360 1440 429 400 400 15 240 886 600 600 650 All figures are given for coil without pre-energization, at ambient temperature +23°C. Other coil voltages on request. Bistable coils - operation Version 1 coil 2 coils Coil terminals A1 A2 A1 A3 A2 Operate + - + Reset - + - + Contact position not defined at delivery RT.3T RTS3L Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Ambient temperature monostable DC coil -40 to 85°C bistable 1 coil -10 to 85°C bistable 2 coils -40 to 85°C Category of environmental protection IEC 61810 RTII - flux proof Vibration resistance (functional), monostable version 10g 20g Shock resistance (destructive) 100g Terminal type PCB-THT, plug-in2) Weight, without / with test tab 14/16g 14g/Resistance to soldering heat THT IEC 60068-2-20 270°C/10s Packaging/unit without test tab tube/20 pcs., tube/20 pcs., box/500 pcs. box/500 pcs. with test tab tray/25 pcs., box/100 pcs. 2) RTT3T or bistable 2 coil version: pcb mounting only. See Accessories Accessories RTS3. For details see datasheet Accessories Industrial Power Relay RT Socket available for 1 coil version only. NOTE: indicated contact ratings and electrical endurance data for direct wiring of relays (according IEC 61810-1); for relays mounted on sockets deratings may apply. Insulation Data Initial dielectric strength between open contacts between contact and coil Clearance/creepage between contact and coil Material group of insulation parts Tracking index of relay base 2 04-2011, Rev. 0411 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company 1250Vrms 5000Vrms ≥10/10mm IIIa PTI 250V Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. General Purpose Relays PCB Relays SCHRACK Power PCB Relay RT1 Inrush Power (Continued) Terminal assignment Bottom view on solder pins monostable version bistable version a) a) Indicated contact position during or after coil energization with reset voltage. b) for 2 coil version only S0163-BF S0163DPS Dimensions / PCB layout version without test tab 16A, pinning 5mm b) for 2 coil version only S0272-BW S0272-BC s0418-CV version with test tab *) With the recommended PCB hole sizes a grid pattern from 2.5mm to 2.54mm can be used. S0491-B S0492-CU 04-2011, Rev. 0411 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 3 General Purpose Relays PCB Relays SCHRACK Power PCB Relay RT1 Inrush Power (Continued) Product code structure Typical product code RT S 3 T A12 Type RT Power PCB Relay RT1 Inrush Power Version S Without test tab T With test tab (manual operator) for contact material ‚T‘ and bistable coil only Contact configuration 3 1 form A (NO) contact Contact material L AgSnO2 T Tungsten (W) pre-make + AgSnO2 Coil Coil code: please refer to coil versions table Product code 4 Version Contacts Contact material Coil version Coil RTS3L005 Without test tab, 1 form A (NO) AgSnO2 Monostable 5VDC RTS3L006 16mm high contact 6VDC RTS3L012 12VDC RTS3L024 24VDC RTS3LA12 Bistable, 1 coil 12VDC RTS3LF12 Bistable, 2 coils RTS3T005 Without test tab, W pre-make + AgSnO2 Monostable 5VDC RTS3T012 15.7mm high 12VDC RTS3T024 24VDC RTS3T048 48VDC RTS3T060 60VDC RTS3TA05 Bistable, 1 coil 5VDC RTS3TA06 6VDC RTS3TA12 12VDC RTS3TF03 Bistable, 2 coils 3VDC RTS3TF12 12VDC RTS3TF24 24VDC RTT3TA12 With test tab, Bistable, 1 coil 12VDC RTT3TF24 23.6mm high Bistable, 2 coils 24VDC This list represents the most common types and does not show all variants covered by this datasheet. Other types on request 04-2011, Rev. 0411 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Part number 1-1415898-8 4-1415898-4 1-1415898-9 1-1415898-4 2-1415898-3 2-1415898-5 1-1415898-6 1415898 1415898-1 1-1415898-1 1-1415898-2 1-1415898-5 3-1415898-1 1415898-2 1415898-4 1415898-5 1415898-6 1415898-7 1-1415898-0 Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change.